CPP tilt column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nlped** · 11-04-2012, 08:05 PM

Anybody have a CPP tilt column shift steering column? If so...How about some feedback on fitment, quality and would you recommend? I really have to have a new steering column as mine is literally coming apart, and I'd love the tilt feature, but I can't afford to pay a small fortune for a replacement. Help a brotha out

Thanks!!!

gearys 5600 · 11-04-2012, 08:45 PM

Get in touch with member " Kevsclassics " he can rebuild your tilt column or he will sell you a rebuilt one.

I have one of his columns in my 69 and it is VERY nice..

1955 mancave · 11-04-2012, 09:14 PM

i have one but i dont have it installed yet i hope to get it installed in thr next month

67Slider · 11-04-2012, 10:21 PM

I'm subscribed. Saw a universal tilt column from CPP on ebay for 180 bucks. I know you need a DD u joint and intermediate shaft but you can grab those for 70-120 from CPP too. Not a bad investment if it works good and I have had good luck from CPP on both quality and customer service. Jeff over there is a solid guy.

chicksdigit · 11-04-2012, 11:59 PM

Saw them in there showroom a couple months back, they look great and seem to be of high quality, would also like to hear some reviews from some who have used them.
Posted via Mobile Device

Slammed66 · 12-08-2012, 12:52 AM

So far unimpressed, the wiring is poorly crimped, and the column isn't cut square and rubs on my billet specialties steering wheel adapter.....
Posted via Mobile Device

YBNORML · 12-08-2012, 01:31 AM

A friend of mine bought one and it was very sloppy, kinda like they get when they are used. He sent it back for an exchange, the replacement was the same. He still used but he is generally unhappy with it.

**Tom Vogel** · 12-08-2012, 09:35 AM

Nobody rides for free.

BrianV · 12-08-2012, 11:00 AM

I Have one in my truck and it is pretty decent. Really easy to install and works well.
It could be a
Little tighter at the tilt knuckle bit overall not bad

Duvall · 12-08-2012, 12:09 PM

The only place to get a quality column is from Kevsclassic. He is a member and I have never seen such quality work. Worth every penny!!!!!!

shawno72 · 12-08-2012, 12:23 PM

All I can say is find a good rebuildable one and have Kevin at KevsClassics rebuild it. You will not be dissapointed, he is a great guy and takes a lot of pride in his work!!

67chevemall · 12-10-2012, 02:45 PM

CPP = sore brain and lost money

**nlped** · 12-10-2012, 03:32 PM

Well, I lucked up on a used tilt in fantastic condition so I'm glad I waited. I was really leery of the CPP tilt, & after starting this thread and reading everyone's experiences...I went back to O.E.

Posted via Mobile Device

shawno72 · 12-10-2012, 03:41 PM

Wise choice in my opinion.

big_al_71 · 12-10-2012, 04:06 PM

I have had one from CPP since 2008 and it has worked fantastic zero issues... the price was $425.00 shipped..

**LEEVON** · 12-10-2012, 04:19 PM

Quote:

Originally Posted by nlped

Well, I lucked up on a used tilt in fantastic condition so I'm glad I waited. I was really leery of the CPP tilt, & after starting this thread and reading everyone's experiences...I went back to O.E.

Posted via Mobile Device

Good move. It took me years but I finally ran across a nice used tilt at the right price ($225). I passed on the early CPP promotion for their tilts at $300-something. I took the collar off and cleaned up the upper guts a little, then painted it. SEM Trim Black 39144 rattle can is perfect for the satin finish. I'm not sure about the CPP unit, but I don't like the typical aftermarket indicator housing and lens. The stockers are heavy pot metal and the lettering is different, sharper and more period-looking.

heathbirkendahl · 12-10-2012, 04:50 PM

Can someone share Kevin's contact info?

Thank you,
Heath

**KevsClassics** · 12-10-2012, 04:58 PM

Quote:

Originally Posted by gearys 5600

Get in touch with member " Kevsclassics " he can rebuild your tilt column or he will sell you a rebuilt one.

I have one of his columns in my 69 and it is VERY nice..

Quote:

Originally Posted by Duvall

The only place to get a quality column is from Kevsclassic. He is a member and I have never seen such quality work. Worth every penny!!!!!!

Quote:

Originally Posted by shawno72

All I can say is find a good rebuildable one and have Kevin at KevsClassics rebuild it. You will not be dissapointed, he is a great guy and takes a lot of pride in his work!!

Thanks for the good words. I,m glad you guys are happy with your columns.

Quote:

Originally Posted by nlped

Well, I lucked up on a used tilt in fantastic condition so I'm glad I waited. I was really leery of the CPP tilt, & after starting this thread and reading everyone's experiences...I went back to O.E.

Posted via Mobile Device

Yes wise choise indeed.

**specialtyretail** · 12-10-2012, 06:19 PM

I bought one of CPP's tilts off ebay last year. I am very disappointed with it. Wiring is cheap and the tilt is already sloppy. Poor quality for the money spent.

glens/72 · 01-17-2016, 03:00 PM

CPP columns. They are off shore junk. Bought one nothing but trouble.

**nlped** · 01-17-2016, 06:21 PM

I thought this thread was gone. I ended up with a solid stock tilt in one of my trucks and had Les (member 70ShortFleet) rebuild & paint another stocker for my '68 Chevy.

custom10nut · 01-17-2016, 08:06 PM

Does anyone have a source of parts for a factory tilt? My turn signal canceling cam is worn out and the column has a little play in it. Also, is it a real difficult thing to tear the column apart to replace parts?

11-04-2012, 08:05 PM	#1
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	CPP tilt column Anybody have a CPP tilt column shift steering column? If so...How about some feedback on fitment, quality and would you recommend? I really have to have a new steering column as mine is literally coming apart, and I'd love the tilt feature, but I can't afford to pay a small fortune for a replacement. Help a brotha out Thanks!!! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-04-2012, 08:45 PM	#2
gearys 5600 Registered User Join Date: Mar 2010 Location: tulsa,ok Posts: 1,085	Re: CPP tilt column Get in touch with member " Kevsclassics " he can rebuild your tilt column or he will sell you a rebuilt one. I have one of his columns in my 69 and it is VERY nice.. __________________ MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=423629 1969 custom/10 swb--SOLD 1968 swb 50th anniv.--SOLD 1967 camaro ss/rs..LS-6-speed, 16-year long project 1956 chevy nomad 1955 chevy 210 2-dr sedan 1978 el-camino ss 1-owner

11-04-2012, 09:14 PM	#3
1955 mancave Registered User Join Date: Jul 2011 Location: Scottsdale Az. Posts: 325	Re: CPP tilt column i have one but i dont have it installed yet i hope to get it installed in thr next month __________________ 1964 1 Ton flatbed service truck (sold) 1964 C-10 panel (project complete frame up build) 1957 210 post pearl orange

11-04-2012, 10:21 PM	#4
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: CPP tilt column I'm subscribed. Saw a universal tilt column from CPP on ebay for 180 bucks. I know you need a DD u joint and intermediate shaft but you can grab those for 70-120 from CPP too. Not a bad investment if it works good and I have had good luck from CPP on both quality and customer service. Jeff over there is a solid guy. __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

11-04-2012, 11:59 PM	#5
chicksdigit Registered User Join Date: Jul 2012 Location: Lemoore California Posts: 75	Re: CPP tilt column Saw them in there showroom a couple months back, they look great and seem to be of high quality, would also like to hear some reviews from some who have used them. Posted via Mobile Device

12-08-2012, 12:52 AM	#6
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: CPP tilt column So far unimpressed, the wiring is poorly crimped, and the column isn't cut square and rubs on my billet specialties steering wheel adapter..... Posted via Mobile Device __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

12-08-2012, 01:31 AM	#7
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: CPP tilt column A friend of mine bought one and it was very sloppy, kinda like they get when they are used. He sent it back for an exchange, the replacement was the same. He still used but he is generally unhappy with it. __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

12-08-2012, 09:35 AM	#8
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: CPP tilt column Nobody rides for free.

12-08-2012, 11:00 AM	#9
BrianV Registered User Join Date: Mar 2010 Location: Mesa, Az Posts: 364	Re: CPP tilt column I Have one in my truck and it is pretty decent. Really easy to install and works well. It could be a Little tighter at the tilt knuckle bit overall not bad

12-08-2012, 12:09 PM	#10
Duvall Registered User Join Date: Dec 2011 Location: Hanford Ca. Posts: 68	Re: CPP tilt column The only place to get a quality column is from Kevsclassic. He is a member and I have never seen such quality work. Worth every penny!!!!!!

12-08-2012, 12:23 PM	#11
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: CPP tilt column All I can say is find a good rebuildable one and have Kevin at KevsClassics rebuild it. You will not be dissapointed, he is a great guy and takes a lot of pride in his work!! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-10-2012, 02:45 PM	#12
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: CPP tilt column CPP = sore brain and lost money __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

12-10-2012, 03:32 PM	#13
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: CPP tilt column Well, I lucked up on a used tilt in fantastic condition so I'm glad I waited. I was really leery of the CPP tilt, & after starting this thread and reading everyone's experiences...I went back to O.E. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

12-10-2012, 03:41 PM	#14
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: CPP tilt column Wise choice in my opinion. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-10-2012, 04:06 PM	#15
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: CPP tilt column I have had one from CPP since 2008 and it has worked fantastic zero issues... the price was $425.00 shipped.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild



Register or Log In To remove these advertisements.

12-10-2012, 04:50 PM	#17
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	Re: CPP tilt column Can someone share Kevin's contact info? Thank you, Heath __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

12-10-2012, 06:19 PM	#19
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: CPP tilt column I bought one of CPP's tilts off ebay last year. I am very disappointed with it. Wiring is cheap and the tilt is already sloppy. Poor quality for the money spent.

01-17-2016, 03:00 PM	#20
glens/72 Registered User Join Date: May 2009 Location: carstairs alberta Posts: 8	Re: CPP tilt column CPP columns. They are off shore junk. Bought one nothing but trouble. Last edited by glens/72; 01-17-2016 at 03:02 PM. Reason: Spelling

01-17-2016, 06:21 PM	#21
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: CPP tilt column I thought this thread was gone. I ended up with a solid stock tilt in one of my trucks and had Les (member 70ShortFleet) rebuild & paint another stocker for my '68 Chevy. Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

01-17-2016, 08:06 PM	#22
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,893	Re: CPP tilt column Does anyone have a source of parts for a factory tilt? My turn signal canceling cam is worn out and the column has a little play in it. Also, is it a real difficult thing to tear the column apart to replace parts?

Register or Log In To remove these advertisements.