Stainless brake hose - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 11-06-2012, 03:44 AM

Has anybody used these? If so what do u think of them. I want some new hoses on the 71 and thought they looked nice for the money.

STAINLESS BRAKE HOSE SET Chevrolet Truck C10, 1/2 Ton, 1971

jjzepplin · 11-06-2012, 05:06 AM

I'd pick "works good" over "looks good" any day but I have had a set of Russell steel braided on the front of my 4x4 for about ten years now and they work good.

Andy4639 · 11-06-2012, 05:44 AM

Quote:

jjzepplin,
I'd pick "works good" over "looks good" any day but I have had a set of Russell steel braided on the front of my 4x4 for about ten years now and they work good.

Well first off I never picked one over the other.

Quote:

Andy4639,
I want some new hoses on the 71 and thought they looked nice for the money.

I assume since they are DOT approved they will perform as any other brake hose.

jjzepplin · 11-06-2012, 06:01 AM

Mine do. Different brand but working good. I would buy some again. In fact I need some for my new project. About how much are these?

Andy4639 · 11-06-2012, 09:27 PM

The E-bay add is $99.00 + $7.30 shipping for the set.
Inline tube for 71 is $105.00 plus $5.00 shipping
Not a lot of differance in price wonder how much differance in material there is.

http://www.ebay.com/itm/330682582656...423.l2649#shId

http://inlinetube.com/Brake%20Hoses%...ess/CT1002.htm

jjzepplin · 11-07-2012, 04:15 AM

I have had good success with inline and bought some cables from them. For the extra few bucks I think it would be good insurance. I would have bought mine from them if they weren't staring at me at the speed shop.

skorpioskorpio · 11-07-2012, 05:20 AM

I have Goodridge Stainless brake hoses on my '03 Sonoma after I burst the stock rubber ones. you'll notice that brakes are firmer, a lot firmer, and it makes you realize how much rubber hoses bloat. Take a little getting used to, there is not as lot of spring in the pedal from when the brakes start to engage until they really grab...and you probably don't have shoulder belts.

huahuamick · 11-07-2012, 05:53 AM

Take a little getting used to, there is not as lot of spring in the pedal from when the brakes start to engage until they really grab.

Andy4639 · 11-07-2012, 04:48 PM

Quote:

Originally Posted by skorpioskorpio

I have Goodridge Stainless brake hoses on my '03 Sonoma after I burst the stock rubber ones. you'll notice that brakes are firmer, a lot firmer, and it makes you realize how much rubber hoses bloat. Take a little getting used to, there is not as lot of spring in the pedal from when the brakes start to engage until they really grab...and you probably don't have shoulder belts.

Ok thanks and yes I do have shoulder belts in the 71.

Andy4639 · 11-07-2012, 07:47 PM

I went ahead and bought them. Will see how they do.

skorpioskorpio · 11-08-2012, 05:11 AM

Quote:

Originally Posted by Andy4639

Ok thanks and yes I do have shoulder belts in the 71.

Hey what is that 60/40 bench out of?

Andy4639 · 11-08-2012, 05:27 AM

The seat is a 89-90 model chevy truck. Got the belts out of a junkyard after getting the free seat.

Andy4639 · 11-13-2012, 05:39 PM

Got the S/S hoses today. They look great. I like the red color of the outer sleeve to.

jjzepplin · 11-14-2012, 07:52 AM

Those look like very good quality! Original picture looks like silver. Wonder if you can pick the color?

Andy4639 · 11-14-2012, 02:20 PM

Quote:

Originally Posted by jjzepplin

Those look like very good quality! Original picture looks like silver. Wonder if you can pick the color?

Yes you pick the color you want when ordering. The orignal picture was there site picture.

skorpioskorpio · 11-14-2012, 02:27 PM

Those are cool, the one thing I didn't like about the Goodridge hoses is that they are an uncoated/uncovered stainless braid. I'll have to look up the ones you got for my next project, they look really nice.

Andy4639 · 11-14-2012, 02:43 PM

Quote:

Originally Posted by skorpioskorpio

Those are cool, the one thing I didn't like about the Goodridge hoses is that they are an uncoated/uncovered stainless braid. I'll have to look up the ones you got for my next project, they look really nice.

They look real good in person. I'll try and get some good close ups when I can. Yea I also liked the covers on them. That's what sold me on them.

Tinkermc · 11-14-2012, 04:36 PM

if you go stainless you should be good for life, no rot like rubber lines.

Andy4639 · 01-25-2013, 09:38 AM

Here the hoses installed. haven't got the back one done yet!

11-06-2012, 03:44 AM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Stainless brake hose Has anybody used these? If so what do u think of them. I want some new hoses on the 71 and thought they looked nice for the money. STAINLESS BRAKE HOSE SET Chevrolet Truck C10, 1/2 Ton, 1971 __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-06-2012, 05:06 AM	#2
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: Stainless brake hose I'd pick "works good" over "looks good" any day but I have had a set of Russell steel braided on the front of my 4x4 for about ten years now and they work good. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

11-06-2012, 06:01 AM	#4
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: Stainless brake hose Mine do. Different brand but working good. I would buy some again. In fact I need some for my new project. About how much are these? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

11-06-2012, 09:27 PM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Stainless brake hose The E-bay add is $99.00 + $7.30 shipping for the set. Inline tube for 71 is $105.00 plus $5.00 shipping Not a lot of differance in price wonder how much differance in material there is. http://www.ebay.com/itm/330682582656...423.l2649#shId http://inlinetube.com/Brake%20Hoses%...ess/CT1002.htm __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-07-2012, 04:15 AM	#6
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: Stainless brake hose I have had good success with inline and bought some cables from them. For the extra few bucks I think it would be good insurance. I would have bought mine from them if they weren't staring at me at the speed shop. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

11-07-2012, 05:20 AM	#7
skorpioskorpio Registered User Join Date: Nov 2010 Location: Los Angeles, CA Posts: 1,018	Re: Stainless brake hose I have Goodridge Stainless brake hoses on my '03 Sonoma after I burst the stock rubber ones. you'll notice that brakes are firmer, a lot firmer, and it makes you realize how much rubber hoses bloat. Take a little getting used to, there is not as lot of spring in the pedal from when the brakes start to engage until they really grab...and you probably don't have shoulder belts.

11-07-2012, 05:53 AM	#8
huahuamick Registered User Join Date: Aug 2012 Location: Baltimore, MD Posts: 71	Re: Stainless brake hose Take a little getting used to, there is not as lot of spring in the pedal from when the brakes start to engage until they really grab.

11-07-2012, 07:47 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Stainless brake hose I went ahead and bought them. Will see how they do. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-08-2012, 05:27 AM	#12
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Stainless brake hose The seat is a 89-90 model chevy truck. Got the belts out of a junkyard after getting the free seat. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-13-2012, 05:39 PM	#13
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Stainless brake hose Got the S/S hoses today. They look great. I like the red color of the outer sleeve to. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-14-2012, 07:52 AM	#14
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,595	Re: Stainless brake hose Those look like very good quality! Original picture looks like silver. Wonder if you can pick the color? __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

11-14-2012, 02:27 PM	#16
skorpioskorpio Registered User Join Date: Nov 2010 Location: Los Angeles, CA Posts: 1,018	Re: Stainless brake hose Those are cool, the one thing I didn't like about the Goodridge hoses is that they are an uncoated/uncovered stainless braid. I'll have to look up the ones you got for my next project, they look really nice.

11-14-2012, 04:36 PM	#18
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Stainless brake hose if you go stainless you should be good for life, no rot like rubber lines.

01-25-2013, 09:38 AM	#19
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Stainless brake hose Here the hoses installed. haven't got the back one done yet! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.