newb says hi - The 1947 - Present Chevrolet & GMC Truck Message Board Network

78longbox4speed · 11-06-2012, 06:55 PM

long time lurker finally joined up. love the info the site has. im in the process of slowly but surely fixing up my 78 c20 work truck. so far ive got every light to work thats been fun ha! runs like a swiss watch at a tick over 100k. its going to need a clutch soon definatley alot easier then my old 80' 3/4ton 4x4!!

this is my 3rd 73-87 truck and my best running one so far! but i figured id say hi and post a pic or two of "the big green weenie"

78longbox4speed · 11-06-2012, 07:00 PM

what you cant see in the pictures on the passenger side, is the previous owner during our bad winter a few years back pulled out of a gas station and hit the box upside one of those nice concrete posts. so its not terrible but it aint purdy either. im thinking or just hanging a bedside on it as this box has very little rust compared to most around my area. this weekend ill be replacing the carrier bearing as well. im hoping that gets rid of the weird lurching/clanging that happens when you turn. funny thing is it only happens turning right! shes also stock as a rock. 350/4-speed w/ 3:73 posi

Car'n'Guitars · 11-06-2012, 07:33 PM

Cool truck, good luck with it.

meter swinger · 11-06-2012, 07:56 PM

welcome from the tri-cities.
You should be able to find a decent bed for it. I see the them often on CL. Also search for pick-up bed trailers. i recently bought a nice dually bed trailer out of hermiston, even had a cab&chassis axle under it.

11-06-2012, 06:55 PM	#1
78longbox4speed Registered User Join Date: Nov 2012 Location: spokane washington Posts: 6	newb says hi long time lurker finally joined up. love the info the site has. im in the process of slowly but surely fixing up my 78 c20 work truck. so far ive got every light to work thats been fun ha! runs like a swiss watch at a tick over 100k. its going to need a clutch soon definatley alot easier then my old 80' 3/4ton 4x4!! this is my 3rd 73-87 truck and my best running one so far! but i figured id say hi and post a pic or two of "the big green weenie"

11-06-2012, 07:00 PM	#2
78longbox4speed Registered User Join Date: Nov 2012 Location: spokane washington Posts: 6	Re: newb says hi what you cant see in the pictures on the passenger side, is the previous owner during our bad winter a few years back pulled out of a gas station and hit the box upside one of those nice concrete posts. so its not terrible but it aint purdy either. im thinking or just hanging a bedside on it as this box has very little rust compared to most around my area. this weekend ill be replacing the carrier bearing as well. im hoping that gets rid of the weird lurching/clanging that happens when you turn. funny thing is it only happens turning right! shes also stock as a rock. 350/4-speed w/ 3:73 posi Attached Images

11-06-2012, 07:33 PM	#3
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: newb says hi Cool truck, good luck with it. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

11-06-2012, 07:56 PM	#4
meter swinger Registered User Join Date: Apr 2009 Location: Kennewick WA. Posts: 1,437	Re: newb says hi welcome from the tri-cities. You should be able to find a decent bed for it. I see the them often on CL. Also search for pick-up bed trailers. i recently bought a nice dually bed trailer out of hermiston, even had a cab&chassis axle under it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.