FS: 68 K20 lwb project 1st $800! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 06-02-2003, 11:10 PM

Bought a 68 4x4 3/4 ton lwb project previous owner started, now I have the same problem he had, not enough time or money to finish. Was told it was originally a 327 with granny four speed, locking front hubs.

Good - Body is in great shape, previous owner replaced corners, rockers, cab mounts, no rust around windshields, good dash. The bed is excellent except for a hole cut in left side, small dent by right tailight, and a little rust over right side wheel. Gategate is also in great shape. Front fenders good. Original rear step bumper. All 4x4 parts still on truck.

Bad - No motor, hood wrong year, broken windshield, no passengers side door (two drivers side, go figure), no tank, seat, basically apart for restoration.

First $800 takes it. Will work on posting pics, but in the mean time drop me an email and I'll send some to you --> SDELVY55@aol.com.

Any questions please let me know. Thanks.

**ScottH** · 06-04-2003, 09:44 PM

ttt - one more time before it goes to ebay

**crossy** · 06-04-2003, 10:02 PM

I think I had asked you before, but where in N.J. , thanx , DAVE

**ScottH** · 06-05-2003, 09:42 AM

Dave, sorry if I missed it. I'm located in Toms River.

Thanks.

**crossy** · 06-05-2003, 11:35 AM

I asked for your sake and anyone else tha might be interested.
free bump :-)

New guy holy350 (Dan) is from up/out your way. good luck. I have too many now. DAVE

6772king · 06-05-2003, 08:02 PM

I'd like to see some pics you could

thanks Sean

**ScottH** · 06-05-2003, 09:58 PM

Sean, no problem with sending you pics, just need your email addy. I haven't had any luck posting them on the board (keeps telling me too large), but I can email them to you. Please pm or email me your address - SDELVY55@aol.com

Thanks.

72C10chevy4x4 · 06-06-2003, 05:52 PM

hey scott-email me the pictures if you don't mind-turbo300zx@delaware.net
thanks-Paul

**crossy** · 06-06-2003, 09:40 PM

Scott, send me 3 or 4 pics to all4trux@snip.net I'll clean them up for you(brighten or whatever) I'll size & crop them and post them here. unless it looks real good!

then I'll just come get it . DAVE

**ScottH** · 06-08-2003, 01:54 PM

Guys, found a nice passengers side door which is included. Also a windshield from a 72, one chip but useable for a driver.

Paul, sent you pics but the email was undeliverable. Any other ideas?

Dave, sent you pics. Any help in posting them would be greatly appreciated.

Thanks to all.

**crossy** · 06-08-2003, 11:20 PM

the ones I send you back tonight you should have no trouble posting. they have to be done one reply at a time though. no need to overdo it here on the forums as anyone truly intersted will be able to get few emailed from you . the ones i send back will be easier to maile to someone else because of size though. DAVE

06-02-2003, 11:10 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	FS: 68 K20 lwb project 1st $800! Bought a 68 4x4 3/4 ton lwb project previous owner started, now I have the same problem he had, not enough time or money to finish. Was told it was originally a 327 with granny four speed, locking front hubs. Good - Body is in great shape, previous owner replaced corners, rockers, cab mounts, no rust around windshields, good dash. The bed is excellent except for a hole cut in left side, small dent by right tailight, and a little rust over right side wheel. Gategate is also in great shape. Front fenders good. Original rear step bumper. All 4x4 parts still on truck. Bad - No motor, hood wrong year, broken windshield, no passengers side door (two drivers side, go figure), no tank, seat, basically apart for restoration. First $800 takes it. Will work on posting pics, but in the mean time drop me an email and I'll send some to you --> SDELVY55@aol.com. Any questions please let me know. Thanks.

06-04-2003, 10:02 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	I think I had asked you before, but where in N.J. , thanx , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

06-05-2003, 11:35 AM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	I asked for your sake and anyone else tha might be interested. free bump :-) New guy holy350 (Dan) is from up/out your way. good luck. I have too many now. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

06-05-2003, 08:02 PM	#6
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	I'd like to see some pics you could thanks Sean __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

06-06-2003, 09:40 PM	#9
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Scott, send me 3 or 4 pics to all4trux@snip.net I'll clean them up for you(brighten or whatever) I'll size & crop them and post them here. unless it looks real good! then I'll just come get it . DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

06-04-2003, 09:44 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	ttt - one more time before it goes to ebay

06-05-2003, 09:42 AM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Dave, sorry if I missed it. I'm located in Toms River. Thanks.

06-05-2003, 09:58 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Sean, no problem with sending you pics, just need your email addy. I haven't had any luck posting them on the board (keeps telling me too large), but I can email them to you. Please pm or email me your address - SDELVY55@aol.com Thanks.

06-06-2003, 05:52 PM	#8
72C10chevy4x4 UK Wildcat Fan! Join Date: Oct 2002 Location: Dover, DE Posts: 515	hey scott-email me the pictures if you don't mind-turbo300zx@delaware.net thanks-Paul

06-08-2003, 01:54 PM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Guys, found a nice passengers side door which is included. Also a windshield from a 72, one chip but useable for a driver. Paul, sent you pics but the email was undeliverable. Any other ideas? Dave, sent you pics. Any help in posting them would be greatly appreciated. Thanks to all.

06-08-2003, 11:20 PM	#11
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	the ones I send you back tonight you should have no trouble posting. they have to be done one reply at a time though. no need to overdo it here on the forums as anyone truly intersted will be able to get few emailed from you . the ones i send back will be easier to maile to someone else because of size though. DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 06-08-2003 at 11:39 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.