TX 72 Big Block swap parts almost everything you need to install a BBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 11-18-2012, 12:11 AM

I started accumulating parts to swap a big block into my 71 GMC but sold the truck, and now I need funds to put the big block into a 79 Malibu instead. Most of the parts came from here on the board.

Shipping to lower 48 is included in prices

Here is what I have:

72 (only) big block alternator brackets, 3 pcs and most if not all hardware SOLD

72 (only) engine mount frame brackets, biscuits and clamshells along with frame bolts and motor mount bolts SOLD

Newer 4 row brass and copper radiator, holds water, came from a running truck $150

Original 4 row brass and copper 4 row holds water, came from a running truck as well, is noticeably heavier than previous radiator. There is one tube that is bent but not leaking. SOLD

4 row radiator hold downs and bottom mounts [B]SOLD

Big block 4 row fan shroud no cracks or breaks SOLD

Pair of lower fan shroud retaining clips SOLD

Big block power steering pump, brackets, pressure and return lines, remote resevoir with cap and hose SOLD
7 blade big block AC clutch fan $50

Oil pressure gauge line with correct adapter to screw into block SOLD

Power brake booster steel vacuum line and hose. SOLD

3 pc pulley set for truck with AC. The lower pulleys are two peices for a total of 3 grooves. The upper pulley has two grooves. SOLD

72 V8 throttle cable, return spring and mounting bracket $30

V8 wiring harnesses. I was told this was off of a big block truck but have not verified. One has only one wire cut (yellow) $50

V8 wiring harnesses. I was told this was off of a big block truck but have not verified. Has a few wires cut and the tape has been unwrapped $30

New in box rebuilt and primed big block short water pump to work with above mentioned pulleys and brackets SOLD

I do not have the A/C brackets as the truck this was going to go in did not have factory A/C and I planned to install aftermarket A/C if I got that far. I also do not have the heavier front coil springs required for a big block.

The total for all parts listed separately is $1,375. I will take $1100 for all of it, or $1000 if you only want one radiator (you pick which one)

Prices include shipping to lower 48

Please do not send PM's. Keep the inquiries in the thread.

I want to try and sell this all together to simplify things but if you want to put yourself inline for individual pieces please do so. As soon as it is apparent in the thread that I can part this out, I will do so.

**WIDESIDE72** · 11-18-2012, 12:17 AM

oem radiator
hold downs
shroud

**WIDESIDE72** · 11-18-2012, 12:29 AM

shroud ears close up

power steering pump and brackets

clutch fan

**WIDESIDE72** · 11-18-2012, 12:34 AM

even more photos

**WIDESIDE72** · 11-18-2012, 12:41 AM

oil pressure line
power brake vacuum line
pulleys
throttle cable

**WIDESIDE72** · 11-18-2012, 12:43 AM

wiring harnesses
water pump
lower shroud clips

darkhorse970 · 11-18-2012, 07:55 AM

I am interested in the following items, would you take $160 for these items?

4 row radiator hold downs and bottom mounts $30

Big block 4 row fan shroud no cracks or breaks $125

Pair of lower fan shroud retaining clips $20

no moa · 11-18-2012, 08:15 AM

Post pics of Malibu please! Love those old malibu's
Posted via Mobile Device

**WIDESIDE72** · 11-18-2012, 11:14 AM

Quote:

Originally Posted by darkhorse970

I am interested in the following items, would you take $160 for these items?

4 row radiator hold downs and bottom mounts $30

Big block 4 row fan shroud no cracks or breaks $125

Pair of lower fan shroud retaining clips $20

I would like to let this ride as a complete deal for this week if you can wait that long. If it doesn't all sell complete by 11/24 I will let you have those three for $160
Posted via Mobile Device

**WIDESIDE72** · 11-18-2012, 11:28 AM

Quote:

Originally Posted by no moa

Post pics of Malibu please! Love those old malibu's
Posted via Mobile Device

http://67-72chevytrucks.com/vboard/s...00#post5708800
Posted via Mobile Device

bronze 72 super · 11-18-2012, 02:33 PM

Would like to be first in line for the following items: Alternator bracket 1972 only,oil pressure line, power brake booster line, oem radiator, 4 row hold down brackets. On the oem radiator does it say "harrison" on the top by the fill hole? Please let me price and shipping to 97050, can you make a package deal on all these items? Thanks Mike

**WIDESIDE72** · 11-18-2012, 02:53 PM

Quote:

Originally Posted by bronze 72 super

Would like to be first in line for the following items: Alternator bracket 1972 only,oil pressure line, power brake booster line, oem radiator, 4 row hold down brackets. On the oem radiator does it say "harrison" on the top by the fill hole? Please let me price and shipping to 97050, can you make a package deal on all these items? Thanks Mike

I have someone ahead of you for the upper hold downs. If my math is correct, $300 for the rest is a little of a price break for the rest of the items. I will put you in line if it does not sell all together this week if that is OK with you.
Posted via Mobile Device

**WIDESIDE72** · 11-18-2012, 02:54 PM

I will check but I believe I did see the Harrison tag on the radiator
Posted via Mobile Device

bronze 72 super · 11-18-2012, 04:47 PM

Sounds good. If it does say Harrison on the radiator than I'll take it. If not I"ll have to past only on that item. I'll take everything else I requested. Thanks Mike.

**WIDESIDE72** · 11-20-2012, 03:56 AM

Quote:

Originally Posted by bronze 72 super

Sounds good. If it does say Harrison on the radiator than I'll take it. If not I"ll have to past only on that item. I'll take everything else I requested. Thanks Mike.

The radiator does have "Harrison" stamped into it on the tank
Posted via Mobile Device

Oldironracing · 11-21-2012, 12:51 AM

I'm interested in the 72 only big block stands and clams.
Posted via Mobile Device

bronze 72 super · 11-21-2012, 12:59 AM

O.K. sounds good. I'll take it, along with the other parts when your ready to sell. Mike.

**WIDESIDE72** · 11-21-2012, 03:52 AM

Quote:

Originally Posted by Oldironracing

I'm interested in the 72 only big block stands and clams.
Posted via Mobile Device

I'll put you in line as mentioned above
Posted via Mobile Device

**WIDESIDE72** · 11-21-2012, 03:55 AM

Quote:

Originally Posted by bronze 72 super

O.K. sounds good. I'll take it, along with the other parts when your ready to sell. Mike.

You're in line
Posted via Mobile Device

**WIDESIDE72** · 11-21-2012, 09:01 PM

Still a lot of pieces not spoken for
Posted via Mobile Device

**WIDESIDE72** · 11-24-2012, 07:34 PM

It looks like this will get split up. PM's sent to everyone in line.

**WIDESIDE72** · 11-26-2012, 01:09 AM

72 big block frame mounts and clamshells still available. Oldironracing sent me a pm that he will pass on them.

darkhorse970 · 11-26-2012, 07:48 AM

Payment sent for these items.

4 row radiator hold downs and bottom mounts $30

Big block 4 row fan shroud no cracks or breaks $125

Pair of lower fan shroud retaining clips $20

**WIDESIDE72** · 11-26-2012, 06:22 PM

Quote:

Originally Posted by darkhorse970

Payment sent for these items.

4 row radiator hold downs and bottom mounts $30

Big block 4 row fan shroud no cracks or breaks $125

Pair of lower fan shroud retaining clips $20

Payment received pm sent getting it packed up today
Posted via Mobile Device

**WIDESIDE72** · 11-27-2012, 03:35 PM

There are still some good parts available. 72 motor mounts/ clams not yet spoken for.

11-18-2012, 12:11 AM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	72 Big Block swap parts almost everything you need to install a BBC I started accumulating parts to swap a big block into my 71 GMC but sold the truck, and now I need funds to put the big block into a 79 Malibu instead. Most of the parts came from here on the board. Shipping to lower 48 is included in prices Here is what I have: 72 (only) big block alternator brackets, 3 pcs and most if not all hardware SOLD 72 (only) engine mount frame brackets, biscuits and clamshells along with frame bolts and motor mount bolts SOLD Newer 4 row brass and copper radiator, holds water, came from a running truck $150 Original 4 row brass and copper 4 row holds water, came from a running truck as well, is noticeably heavier than previous radiator. There is one tube that is bent but not leaking. SOLD 4 row radiator hold downs and bottom mounts [B]SOLD Big block 4 row fan shroud no cracks or breaks SOLD Pair of lower fan shroud retaining clips SOLD Big block power steering pump, brackets, pressure and return lines, remote resevoir with cap and hose SOLD 7 blade big block AC clutch fan $50 Oil pressure gauge line with correct adapter to screw into block SOLD Power brake booster steel vacuum line and hose. SOLD 3 pc pulley set for truck with AC. The lower pulleys are two peices for a total of 3 grooves. The upper pulley has two grooves. SOLD 72 V8 throttle cable, return spring and mounting bracket $30 V8 wiring harnesses. I was told this was off of a big block truck but have not verified. One has only one wire cut (yellow) $50 V8 wiring harnesses. I was told this was off of a big block truck but have not verified. Has a few wires cut and the tape has been unwrapped $30 New in box rebuilt and primed big block short water pump to work with above mentioned pulleys and brackets SOLD I do not have the A/C brackets as the truck this was going to go in did not have factory A/C and I planned to install aftermarket A/C if I got that far. I also do not have the heavier front coil springs required for a big block. The total for all parts listed separately is $1,375. I will take $1100 for all of it, or $1000 if you only want one radiator (you pick which one) Prices include shipping to lower 48 Please do not send PM's. Keep the inquiries in the thread. I want to try and sell this all together to simplify things but if you want to put yourself inline for individual pieces please do so. As soon as it is apparent in the thread that I can part this out, I will do so. Attached Images Last edited by WIDESIDE72; 12-05-2012 at 06:59 PM.

11-18-2012, 12:17 AM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 Big Block swap parts almost everything you need to install a BBC oem radiator hold downs shroud Attached Images Last edited by WIDESIDE72; 11-18-2012 at 12:46 AM.

11-18-2012, 12:29 AM	#3
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 Big Block swap parts almost everything you need to install a BBC shroud ears close up power steering pump and brackets clutch fan Attached Images Last edited by WIDESIDE72; 11-18-2012 at 12:44 AM.

11-18-2012, 12:34 AM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 Big Block swap parts almost everything you need to install a BBC even more photos

11-18-2012, 12:41 AM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 Big Block swap parts almost everything you need to install a BBC oil pressure line power brake vacuum line pulleys throttle cable Attached Images

11-18-2012, 12:43 AM	#6
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 Big Block swap parts almost everything you need to install a BBC wiring harnesses water pump lower shroud clips Attached Images

11-18-2012, 07:55 AM	#7
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,105	Re: 72 Big Block swap parts almost everything you need to install a BBC I am interested in the following items, would you take $160 for these items? 4 row radiator hold downs and bottom mounts $30 Big block 4 row fan shroud no cracks or breaks $125 Pair of lower fan shroud retaining clips $20 __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

11-18-2012, 08:15 AM	#8
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: 72 Big Block swap parts almost everything you need to install a BBC Post pics of Malibu please! Love those old malibu's Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

11-18-2012, 02:33 PM	#11
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 72 Big Block swap parts almost everything you need to install a BBC Would like to be first in line for the following items: Alternator bracket 1972 only,oil pressure line, power brake booster line, oem radiator, 4 row hold down brackets. On the oem radiator does it say "harrison" on the top by the fill hole? Please let me price and shipping to 97050, can you make a package deal on all these items? Thanks Mike

11-18-2012, 02:54 PM	#13
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 Big Block swap parts almost everything you need to install a BBC I will check but I believe I did see the Harrison tag on the radiator Posted via Mobile Device

11-18-2012, 04:47 PM	#14
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 72 Big Block swap parts almost everything you need to install a BBC Sounds good. If it does say Harrison on the radiator than I'll take it. If not I"ll have to past only on that item. I'll take everything else I requested. Thanks Mike.

11-21-2012, 12:51 AM	#16
Oldironracing Registered User Join Date: Oct 2007 Location: Austin Arkansas Posts: 252	Re: 72 Big Block swap parts almost everything you need to install a BBC I'm interested in the 72 only big block stands and clams. Posted via Mobile Device __________________ OLDIRONRACING

11-21-2012, 12:59 AM	#17
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: 72 Big Block swap parts almost everything you need to install a BBC O.K. sounds good. I'll take it, along with the other parts when your ready to sell. Mike.

11-21-2012, 09:01 PM	#20
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 Big Block swap parts almost everything you need to install a BBC Still a lot of pieces not spoken for Posted via Mobile Device Last edited by WIDESIDE72; 11-26-2012 at 01:00 AM.

11-24-2012, 07:34 PM	#21
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 Big Block swap parts almost everything you need to install a BBC It looks like this will get split up. PM's sent to everyone in line.



Register or Log In To remove these advertisements.

11-26-2012, 01:09 AM	#22
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 Big Block swap parts almost everything you need to install a BBC 72 big block frame mounts and clamshells still available. Oldironracing sent me a pm that he will pass on them.

11-26-2012, 07:48 AM	#23
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,105	Re: 72 Big Block swap parts almost everything you need to install a BBC Payment sent for these items. 4 row radiator hold downs and bottom mounts $30 Big block 4 row fan shroud no cracks or breaks $125 Pair of lower fan shroud retaining clips $20 __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

11-27-2012, 03:35 PM	#25
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 72 Big Block swap parts almost everything you need to install a BBC There are still some good parts available. 72 motor mounts/ clams not yet spoken for.

Register or Log In To remove these advertisements.