Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-29-2012, 09:26 PM | #1 |
Registered User
Join Date: Mar 2011
Location: Oak Ridge NC
Posts: 957
|
Electric windows are VERY slow.
Is there anything cheap that I can do to address the windows going up and down very slowly? They are so bad that I have to assist them sometimes.
|
11-29-2012, 10:10 PM | #2 |
Registered User
Join Date: Jul 2012
Location: Central Oklahoma
Posts: 147
|
Re: Electric windows are VERY slow.
Best thing to do is remove door panel and clean the window tracks.. Clean them really really good.. Then spray in some white lithium grease into the tracks....
Keep your fingers clear of the windows after this point. LOL |
11-29-2012, 10:38 PM | #3 |
Registered User
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,189
|
Re: Electric windows are VERY slow.
x2. Check the plastic wheels on the regulators - they get clogged up with hardened grease over the years, so clean up and re grease. After you clean out all old grease, shoot the tracks with silicone spray and see if it helps. If this does not help, buy new AC Delco window motors from an online OEM seller - about $25 per motor - should get free shipping.
|
11-29-2012, 10:48 PM | #4 |
Registered User
Join Date: Jun 2004
Location: El Lago, TX
Posts: 1,668
|
Re: Electric windows are VERY slow.
There is a good thread on here somewhere about adding relays to get more power to the motors.
Posted via Mobile Device |
11-29-2012, 10:48 PM | #5 |
Registered User
Join Date: Mar 2012
Location: San Antonio, Tx
Posts: 784
|
Re: Electric windows are VERY slow.
i did this too i greased the tracks and everything my driver side is fine, my passenger is slowww
i heard about adding a relay that may speed em up
__________________
San Antonio, TEXAS -Frog -I'm a valet and well I've driven BMWs, Mercedes, Porsche,Bentlys, fiats, Hondas, etc and well even do I like a few features, I love my shortbed, it dosent bore me out, just press on the gas and you'll remember why you love it. |
11-29-2012, 11:09 PM | #6 |
Registered User
Join Date: Mar 2011
Location: Oak Ridge NC
Posts: 957
|
Re: Electric windows are VERY slow.
The next question is, is there an easy walk through for removing the door panel so I don't go all Incredible Hulk on it and break something?
|
11-29-2012, 11:12 PM | #7 |
Registered User
Join Date: Sep 2010
Location: Marble Falls, TX
Posts: 1,575
|
Re: Electric windows are VERY slow.
That "incredible hulk" statement made me laugh, I did that the first time and the door panel broke check this out https://www.youtube.com/watch?v=mczSAD3egbw
__________________
Michael Re-starting the neglected '77...http://67-72chevytrucks.com/vboard/s...=425464&page=9 |
11-29-2012, 11:16 PM | #8 |
Registered User
Join Date: Jan 2012
Location: Oklahoma City, Oklahoma
Posts: 114
|
Re: Electric windows are VERY slow.
I too would love to see the thread on how to add another relay. That would be really good info for all of us with slow power windows. I have actually thought about going to crankers because of it.
__________________
Rally 'round the family....with a pocket full of shells. |
11-30-2012, 03:05 AM | #9 |
Registered User
Join Date: Jul 2009
Location: washington
Posts: 4,178
|
Re: Electric windows are VERY slow.
Power drill and manual crank windows goes up fast.
But the relays and cleaning help ALOT Posted via Mobile Device
__________________
377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511 |
11-30-2012, 04:17 AM | #10 |
Registered User
Join Date: Mar 2012
Location: Los Angeles Killa kalli
Posts: 73
|
Re: Electric windows are VERY slow.
try some silicone spray.
__________________
00 EBP civic SI [not stock for sure] 03' Jet black CTS {slammed on ksports} 79 C10 [real project] POW MIA. .SMOKE TIRES NOT DRUGS. |
11-30-2012, 05:03 AM | #11 |
Registered User
Join Date: Sep 2012
Location: TX
Posts: 1,014
|
Re: Electric windows are VERY slow.
Yeah I WD-40's up my driver's side and its quicker now. But new regulators and motors are usually what's needed to speed 'em back up to factory spec.
I've got this weird idea brewing in my brain. It involves finding motors that will fit and work with the regulators in these trucks, but that run much faster. And then attaching a relay in-line somewhere that makes the window switches automatic up and down. On both the driver and passenger sides. That'd be cool...... |
11-30-2012, 07:23 AM | #12 |
Registered User
Join Date: Mar 2011
Location: Oak Ridge NC
Posts: 957
|
Re: Electric windows are VERY slow.
I forgot to ask, what is the best thing to use to clean the tracks and regulator wheel with?
|
11-30-2012, 08:51 AM | #13 | |
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Electric windows are VERY slow.
Quote:
new trucks have sensors to protect us/kids
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
|
11-30-2012, 09:20 AM | #14 | |
Registered User
Join Date: Dec 2006
Location: SLC, UT
Posts: 706
|
Re: Electric windows are VERY slow.
Quote:
But, I found once I replaced the motors in my square, they ran just as fast as the windows in my '02 Blazer, which are still pretty fast. |
|
11-30-2012, 05:22 PM | #15 |
Registered User
Join Date: Sep 2012
Location: TX
Posts: 1,014
|
Re: Electric windows are VERY slow.
Well maybe I just need to do the relay itself then, and not faster motors.
But then I can't roll somebody's head up in there and drive off like in the movies. lol |
11-30-2012, 08:39 PM | #16 |
Registered User
Join Date: Oct 2012
Location: Camaro Country,GA
Posts: 30
|
Re: Electric windows are VERY slow.
__________________
1977 Chevrolet Scottsdale: 1979 Camaro Z2/8 http://www.nastyz28.com/forum/showthread.php?t=129623 |
12-01-2012, 01:12 AM | #17 |
Senior Member
Join Date: Apr 2009
Location: Lawrence KS
Posts: 821
|
Re: Electric windows are VERY slow.
watchin'
__________________
1981 Chevy C30 440 Holmes 42K one owner miles |
12-01-2012, 01:54 AM | #18 |
Registered User
Join Date: Sep 2012
Location: TX
Posts: 1,014
|
Re: Electric windows are VERY slow.
|
12-01-2012, 05:13 AM | #19 |
Registered User
Join Date: Oct 2012
Location: Camaro Country,GA
Posts: 30
|
Re: Electric windows are VERY slow.
More voltage --which means faster they go up/down
__________________
1977 Chevrolet Scottsdale: 1979 Camaro Z2/8 http://www.nastyz28.com/forum/showthread.php?t=129623 |
12-01-2012, 05:33 AM | #20 |
Registered User
Join Date: Aug 2012
Location: Baltimore, MD
Posts: 71
|
Re: Electric windows are VERY slow.
Great thread,Thank you to all those who posted...., keep them coming : )
|
12-01-2012, 10:04 AM | #21 |
Registered User
Join Date: Mar 2000
Location: Clute, TX.
Posts: 1,935
|
Re: Electric windows are VERY slow.
That's AWSOME, I saved the diagram .i might give this a try
Posted via Mobile Device
__________________
2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe |
12-01-2012, 10:09 AM | #22 |
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
Re: Electric windows are VERY slow.
Yea, voltage helps!!
I run a 145 amp alternator in my truck. Lube all the parts!! |
12-01-2012, 11:03 AM | #23 |
Registered User
Join Date: Mar 2012
Location: Woodbury, Ct.
Posts: 1,692
|
Re: Electric windows are VERY slow.
Subscribing to this one...have power regulators and wire harness ready to go..probably use this diagram...108amp alternator good enough? Taurus electric fan sucks up some juice.
Posted via Mobile Device |
12-01-2012, 09:58 PM | #24 |
Registered User
Join Date: Apr 2010
Location: Guntersville Alabama
Posts: 1,073
|
Re: Electric windows are VERY slow.
I did the relay mod on my 82 when I did the resto. The power goes around the world before it gets to the motor. When I check the voltage it was about 8 to 9 volts to the motor, After the relay I had about 11 volts at the motor with the engine not running. Made a huge diffrence. I also did some clean up and lube on all the tracks. It would be a good idea to check all working parts to be sure you dont have another issue. The diagram above is how I did mine with the excption of the running of a ground wire to the chassis and motor case. I does not need this wire. The motor gets it ground from one of the two wires from the motor connector. The motor wires reverse polarity on the connector to make the motor run the other way. This is a great way to improve the speed of the window. motors alone may help sum but will not cure the problem alone. My windows are as fast as my 06 chevy with out any hesitation. It was worth the time and trouble. The windows are one of the first things my friends show off on my truck being there history of being slow.
Skunksmash, The advantage is that you take the load off of the factory wiring and the relays bring power directly from the battery to the motors. Last edited by homemade87; 12-01-2012 at 10:05 PM. |
12-02-2012, 01:40 PM | #25 |
Registered User
Join Date: Jul 2011
Location: Dallas, TX
Posts: 205
|
Re: Electric windows are VERY slow.
Change out the window regulator I changed my out not for that reason (broke) now the window rolls up & down fast.
|
Bookmarks |
|
|