IL WTB Solid cab in my area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

starfire58 · 12-04-2012, 05:54 PM

Anyone in my area with a solid cab to sell? I'm in central Illinois and have a trailer so pick-up would not be a problem. I've seen a lot of cabs available on this site but all were too far away. Iowa,Wisconsin,Indiana,Illinois all ok. I just can't afford to ship one in from far away and I can't take a really long road trip right now because of work. Thanks! Bob

starfire58 · 12-04-2012, 05:57 PM

Cab can be with doors or without, A/C or non-A/C.,Preferably a small hump. I am looking for doors too. All for a '71. Thanks. Figured it was worth a shot to post this.

nobolt · 12-04-2012, 06:22 PM

did you see the Neb. thread by 408impala1? its too far for me but not very bad for you

**70STOVEBOLT** · 12-04-2012, 08:42 PM

What do you call a solid cab? One that needs the usual replacement panels?

Rochlow · 12-04-2012, 09:33 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=553494
Posted via Mobile Device

starfire58 · 12-04-2012, 09:38 PM

Preferably rust free, but I don't mind if it only needs rockers/cab corners. Solid,original cab supports a must. rust free firewall and floors,please. Definitely solid drip rails and inner headliner. I have a rusty cab that needs everything above except drip rails and headliner area are solid. I just prefer a nicer orig. cab. I know it sounds like I'm nitpicking but It's what I want. Thanks. Bob

starfire58 · 12-04-2012, 10:06 PM

nobolt- That's a farther trip than I can take right now. Thank you for the info though. I'm really hoping to find something closer. Thanks! Bob

**leddzepp** · 12-04-2012, 10:32 PM

You might want to hit up board member Fine69, as he is located in Ohio and has dragged back several low-to-no rust cabs, doors, and other sheet metal from Arizona and California.
Posted via Mobile Device

Sammy · 12-04-2012, 10:34 PM

How far is too far? 300 miles? I know of one near me that had rockers n cab corners done but believe it still needed work on the floor pan that had been chemically dipped 3 X's n treated i could inquire about further for you. It was a stripped cab for the dipping process. I don't know what he was asking for it. So no doors. Let me know I can check and get pics n more info.

starfire58 · 12-05-2012, 12:05 AM

leddzepp-thanks for the info!
Sammy- I'd be happy to take a look, thanks!

Bluechevy68 · 12-05-2012, 10:06 AM

Is Kentucky to far? I'd sale you my whole truck. lol

starfire58 · 12-05-2012, 05:10 PM

Quote:

Originally Posted by Bluechevy68

Is Kentucky to far? I'd sale you my whole truck. lol

Bluechevy68- As much as I would like to have another one, my wife would tell you I definitely don't need another whole truck !!! LOL I'm lucky she puts up with the projects I do have,I guess.

starfire58 · 12-06-2012, 05:24 PM

Bump... Anybody in my area with a nice cab for sale. Or, anybody in my area travel south or west to bring parts back from the land of no rust???

toyplumbertrucks · 12-06-2012, 06:18 PM

[I] have one in Northwest Indiana. It has real clean floor and windshield, one rocker has a hole and such. It has a rust spot on the drip rail above the passenger side door. It came from Nevda. I could email you pictures if you like.

toyplumbertrucks · 12-06-2012, 06:20 PM

I just checked google maps, your only about 2 hrs. away

starfire58 · 12-06-2012, 07:49 PM

Quote:

Originally Posted by toyplumbertrucks

[I] have one in Northwest Indiana. It has real clean floor and windshield, one rocker has a hole and such. It has a rust spot on the drip rail above the passenger side door. It came from Nevda. I could email you pictures if you like.

toyplumbertrucks- PM sent. Thank you! Bob

starfire58 · 12-09-2012, 11:52 PM

I no longer need a cab. I found a very nice one an hour away from me. Purchased it today. Thanks to all of you for the responses to this thread!

nobolt · 12-10-2012, 07:44 AM

good for you!! if you have any solid leads that were a bit too far for you please shoot me a PM. i'm still looking.

**gmc 2500 4x4** · 12-10-2012, 07:48 AM

Quote:

Originally Posted by leddzepp

You might want to hit up board member Fine69, as he is located in Ohio and has dragged back several low-to-no rust cabs, doors, and other sheet metal from Arizona and California.
Posted via Mobile Device

great to deal with, i scored a nice cab he had from az.

12-04-2012, 05:54 PM	#1
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	WTB Solid cab in my area Anyone in my area with a solid cab to sell? I'm in central Illinois and have a trailer so pick-up would not be a problem. I've seen a lot of cabs available on this site but all were too far away. Iowa,Wisconsin,Indiana,Illinois all ok. I just can't afford to ship one in from far away and I can't take a really long road trip right now because of work. Thanks! Bob

12-04-2012, 05:57 PM	#2
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: WTB Solid cab in my area Cab can be with doors or without, A/C or non-A/C.,Preferably a small hump. I am looking for doors too. All for a '71. Thanks. Figured it was worth a shot to post this. Last edited by starfire58; 12-04-2012 at 06:06 PM. Reason: details

12-04-2012, 06:22 PM	#3
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: WTB Solid cab in my area did you see the Neb. thread by 408impala1? its too far for me but not very bad for you __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-04-2012, 08:42 PM	#4
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: WTB Solid cab in my area What do you call a solid cab? One that needs the usual replacement panels? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-04-2012, 09:33 PM	#5
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: WTB Solid cab in my area http://67-72chevytrucks.com/vboard/s...d.php?t=553494 Posted via Mobile Device

12-04-2012, 09:38 PM	#6
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: WTB Solid cab in my area Preferably rust free, but I don't mind if it only needs rockers/cab corners. Solid,original cab supports a must. rust free firewall and floors,please. Definitely solid drip rails and inner headliner. I have a rusty cab that needs everything above except drip rails and headliner area are solid. I just prefer a nicer orig. cab. I know it sounds like I'm nitpicking but It's what I want. Thanks. Bob

12-04-2012, 10:06 PM	#7
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: WTB Solid cab in my area nobolt- That's a farther trip than I can take right now. Thank you for the info though. I'm really hoping to find something closer. Thanks! Bob

12-04-2012, 10:32 PM	#8
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,117	Re: WTB Solid cab in my area You might want to hit up board member Fine69, as he is located in Ohio and has dragged back several low-to-no rust cabs, doors, and other sheet metal from Arizona and California. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

12-04-2012, 10:34 PM	#9
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: WTB Solid cab in my area How far is too far? 300 miles? I know of one near me that had rockers n cab corners done but believe it still needed work on the floor pan that had been chemically dipped 3 X's n treated i could inquire about further for you. It was a stripped cab for the dipping process. I don't know what he was asking for it. So no doors. Let me know I can check and get pics n more info. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

12-05-2012, 12:05 AM	#10
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: WTB Solid cab in my area leddzepp-thanks for the info! Sammy- I'd be happy to take a look, thanks!

12-05-2012, 10:06 AM	#11
Bluechevy68 Registered User Join Date: Nov 2011 Location: London,KY Posts: 299	Re: WTB Solid cab in my area Is Kentucky to far? I'd sale you my whole truck. lol

12-06-2012, 05:24 PM	#13
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: WTB Solid cab in my area Bump... Anybody in my area with a nice cab for sale. Or, anybody in my area travel south or west to bring parts back from the land of no rust???

12-06-2012, 06:18 PM	#14
toyplumbertrucks Registered User Join Date: Aug 2012 Location: st. john, in Posts: 280	Re: WTB Solid cab in my area [I] have one in Northwest Indiana. It has real clean floor and windshield, one rocker has a hole and such. It has a rust spot on the drip rail above the passenger side door. It came from Nevda. I could email you pictures if you like.

12-06-2012, 06:20 PM	#15
toyplumbertrucks Registered User Join Date: Aug 2012 Location: st. john, in Posts: 280	Re: WTB Solid cab in my area I just checked google maps, your only about 2 hrs. away

12-09-2012, 11:52 PM	#17
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: WTB Solid cab in my area I no longer need a cab. I found a very nice one an hour away from me. Purchased it today. Thanks to all of you for the responses to this thread!



Register or Log In To remove these advertisements.

12-10-2012, 07:44 AM	#18
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: WTB Solid cab in my area good for you!! if you have any solid leads that were a bit too far for you please shoot me a PM. i'm still looking. __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

Register or Log In To remove these advertisements.