396 and 400 tranny!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 06-05-2003, 06:08 PM

I got this in a 71 burb, its not running, its not froze up, its an original motor for the burb. Intake is there, no exhaust manifolds, no other brackets. $400 no shipping. I need to sell this to make room for more trucks. Thanks Randy

Burnsman · 06-06-2003, 07:43 AM

Randy, is chevy fatman still heading in that direction? Or is any one else. I'd take it if someone could bring it part way back. I live in NW Pa. I too have been doing alot of traveling and I just don't have the time. Not to mention my truck is a gas pig.

chevy_fatman · 06-06-2003, 10:38 AM

Bursman, I'll be coming home on 70, south of Pittsburgh, is that close enough? pm me if you like.

Burnsman · 06-06-2003, 01:39 PM

Pm'd ya fatman. You can e-mail me. It's easier. If you do bring the motor trans for me, I may have ya grab a 3/4 ton front disc set-up from Randy too. Let me know. Thanks.

chevy_fatman · 06-06-2003, 02:54 PM

pm at 'ya Burnsman

Burnsman · 06-06-2003, 03:06 PM

Back at ya.

Burnsman · 06-06-2003, 05:05 PM

Randy, I'll Pm ya. I'd like 1st dibs if I can work something out with fatman on delivery. I need a 3/4 ton disc set-up too. Is it seperated into smaller components (so I don't have to bring the whole frame clip home)? Thanks.

teeitup · 06-06-2003, 05:09 PM

Let me know if you too get things worked out, Its still complete, but I can cut the frame down some. I'll have a loader here when he comes. Let me know what you guys decide, Thanks Randy

**ScottH** · 06-06-2003, 05:29 PM

Randy, I sent you an email on the engine/trans.
Did u get it?

Let me know what u think. Thanks.

Scott

Burnsman · 06-07-2003, 04:19 PM

Randy, is there any way to just cut the a-arms off? Is everything else the same (putting on my dad's 67 gmc 3/4 2wd) if we trash the a-arms? I pm'd fatman, but haven't gotten a reply. Or send me your phone #, and I can try to call you. Thanks.

teeitup · 06-07-2003, 08:51 PM

I'll have to look and see if I can. Thanks Randy

ZOOMY · 06-09-2003, 03:20 AM

.

06-05-2003, 06:08 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	396 and 400 tranny!!!! I got this in a 71 burb, its not running, its not froze up, its an original motor for the burb. Intake is there, no exhaust manifolds, no other brackets. $400 no shipping. I need to sell this to make room for more trucks. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-06-2003, 07:43 AM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Randy, is chevy fatman still heading in that direction? Or is any one else. I'd take it if someone could bring it part way back. I live in NW Pa. I too have been doing alot of traveling and I just don't have the time. Not to mention my truck is a gas pig. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-06-2003, 10:38 AM	#3
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Bursman, I'll be coming home on 70, south of Pittsburgh, is that close enough? pm me if you like. __________________ Paul How do you make the invisible, visible?.........You take it away.

06-06-2003, 01:39 PM	#4
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Pm'd ya fatman. You can e-mail me. It's easier. If you do bring the motor trans for me, I may have ya grab a 3/4 ton front disc set-up from Randy too. Let me know. Thanks. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-06-2003, 02:54 PM	#5
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	pm at 'ya Burnsman __________________ Paul How do you make the invisible, visible?.........You take it away.

06-06-2003, 03:06 PM	#6
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Back at ya. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-06-2003, 05:05 PM	#7
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Randy, I'll Pm ya. I'd like 1st dibs if I can work something out with fatman on delivery. I need a 3/4 ton disc set-up too. Is it seperated into smaller components (so I don't have to bring the whole frame clip home)? Thanks. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-06-2003, 05:09 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Let me know if you too get things worked out, Its still complete, but I can cut the frame down some. I'll have a loader here when he comes. Let me know what you guys decide, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-06-2003, 05:29 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Randy, I sent you an email on the engine/trans. Did u get it? Let me know what u think. Thanks. Scott

06-07-2003, 04:19 PM	#10
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Randy, is there any way to just cut the a-arms off? Is everything else the same (putting on my dad's 67 gmc 3/4 2wd) if we trash the a-arms? I pm'd fatman, but haven't gotten a reply. Or send me your phone #, and I can try to call you. Thanks. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

06-07-2003, 08:51 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I'll have to look and see if I can. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-09-2003, 03:20 AM	#12
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	ttt .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.