350 for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pugs · 06-05-2003, 11:56 PM

i have a 350 goodwrench( 10066036 cast #'s) about 40k on it i heard it run about 2 1/2 months ago was going to buy whole tk but cab was shot asking $250 located in NE Pa

dinnut · 06-07-2003, 01:39 AM

is it a carb or fuel injection? is it from an old truck or what?

cojnit · 06-07-2003, 02:17 AM

is it complete? If not how much of it and are you willing to ship??

pugs · 06-07-2003, 09:19 AM

engine is complete carb to pan fan to flywheel will not ship must be picled up here

**ScottH** · 06-07-2003, 12:19 PM

Pugs, how far from NJ are you, interested in the motor. Can u provide any other info, carb, manifold, cam, headers, hei, etc?
Also does it currently run, can I hear it if I come to pick it up?

Any info is appreciated. Put me in line.

Thanks!

SDELVY55@aol.com

dinnut · 06-07-2003, 02:38 PM

how far is hamburg from aliquippa, pa

pugs · 06-07-2003, 05:38 PM

as far as i know its all stock 350 but could have an RV cam being it was in a tk stock headers and its hei dist. imabout an 1-2 hours from jersey and about 3 1/2 hours from the pittsburg area the motor is out of the tk so cant be started sorry, but i did heard it about 2 1/2 monthes ago and it ran and sounded good

**ScottH** · 06-07-2003, 08:02 PM

Pugs, thanks for the info. Would u know if it's a 2 or 4 bolt main, 2 or 4 brl carb, auto or manual flywheel? If I can arrange to get there soon, I'll let you know. BTW how soon would I need to pick it up?

pugs · 06-07-2003, 08:53 PM

its a 4bbl but not sure if its 2 or 4 bolt main i would presume its a 2 bolt would like it out of here asap its on the back of my tk and don't have the room in my garage at the moment cuz i have mt 56 tk and 53 sedan delivery in there i do have a cover over the motor to keep it kind of dry

Roberty · 06-07-2003, 10:42 PM

If it's a Goodwrench Targetmaster replacement motor then it's a 4 bolt main block.
Robert

pugs · 06-07-2003, 11:40 PM

ok cool thats what it is thanx for the info

**ScottH** · 06-08-2003, 01:40 PM

Pugs, sent u a pm.

pugs · 06-08-2003, 01:48 PM

i ll take $200 for it if someone can come get it off my tk today

**ScottH** · 06-08-2003, 01:57 PM

Pugs, I believe next weekend is the earliest. However if I can free up for tonight I'll let you know. How bout sending me your phone number so I can reach you in the event I can make it tonight -> SDELVY55@aol.com

Thanks.

Scott

06-05-2003, 11:56 PM	#1
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	350 for sale i have a 350 goodwrench( 10066036 cast #'s) about 40k on it i heard it run about 2 1/2 months ago was going to buy whole tk but cab was shot asking $250 located in NE Pa __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

06-07-2003, 01:39 AM	#2
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	is it a carb or fuel injection? is it from an old truck or what? __________________ 70 longbed 496/th400/Ford 9"

06-07-2003, 02:17 AM	#3
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	350 is it complete? If not how much of it and are you willing to ship??

06-07-2003, 09:19 AM	#4
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	engine is complete carb to pan fan to flywheel will not ship must be picled up here __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

06-07-2003, 02:38 PM	#6
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	how far is hamburg from aliquippa, pa __________________ 70 longbed 496/th400/Ford 9"

06-07-2003, 12:19 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,191	Pugs, how far from NJ are you, interested in the motor. Can u provide any other info, carb, manifold, cam, headers, hei, etc? Also does it currently run, can I hear it if I come to pick it up? Any info is appreciated. Put me in line. Thanks! SDELVY55@aol.com

06-07-2003, 05:38 PM	#7
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	re as far as i know its all stock 350 but could have an RV cam being it was in a tk stock headers and its hei dist. imabout an 1-2 hours from jersey and about 3 1/2 hours from the pittsburg area the motor is out of the tk so cant be started sorry, but i did heard it about 2 1/2 monthes ago and it ran and sounded good __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

06-07-2003, 08:02 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,191	Pugs, thanks for the info. Would u know if it's a 2 or 4 bolt main, 2 or 4 brl carb, auto or manual flywheel? If I can arrange to get there soon, I'll let you know. BTW how soon would I need to pick it up?

06-07-2003, 08:53 PM	#9
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	re its a 4bbl but not sure if its 2 or 4 bolt main i would presume its a 2 bolt would like it out of here asap its on the back of my tk and don't have the room in my garage at the moment cuz i have mt 56 tk and 53 sedan delivery in there i do have a cover over the motor to keep it kind of dry __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

06-07-2003, 10:42 PM	#10
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	If it's a Goodwrench Targetmaster replacement motor then it's a 4 bolt main block. Robert __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

06-07-2003, 11:40 PM	#11
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	re ok cool thats what it is thanx for the info __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

06-08-2003, 01:40 PM	#12
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,191	Pugs, sent u a pm.

06-08-2003, 01:48 PM	#13
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	re i ll take $200 for it if someone can come get it off my tk today __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

06-08-2003, 01:57 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,191	Pugs, I believe next weekend is the earliest. However if I can free up for tonight I'll let you know. How bout sending me your phone number so I can reach you in the event I can make it tonight -> SDELVY55@aol.com Thanks. Scott



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.