VA Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC66 · 12-27-2012, 04:09 PM

Rare 60-63 GMC Custom Door Trim (No dents)-$125 + shipping
Taillight lenses-$10 pr + shipping
Chevy horn ring-$10 + shipping
292 intake and exhaust, not cracked but 1 of 3 studs broken-SOLD
292 Monojet carb-$35 + shipping
C10 side badges-SOLD
GMC Custom Badges-$40 + shipping
Rearview mirror-SOLD
Chevy 6 cyl double groove water pump pulley-$18 + shipping
Matching double groove waterpump/altenator pulleys-$45 +shipping
Parting out 1971 292, no air cleaner, balancer.

GMC66 · 12-27-2012, 07:46 PM

Power steering brackets with pump sold. Still have another set without pump. Also still have the pulleys.
Posted via Mobile Device

RANDY COX · 12-27-2012, 08:22 PM

where about you located in va...

GMC66 · 12-27-2012, 08:31 PM

Smithfield, near Newport News

circa73 · 12-27-2012, 09:55 PM

Where is the stud broken? Is it into the casting, or broken below the casting?

GMC66 · 12-27-2012, 10:01 PM

It has about 1/4 inch sticking out the bottom of the exhaust flange.

circa73 · 12-27-2012, 10:07 PM

I need an exhaust manifold, but not an intake. If you can separate, please give me a price.

GMC66 · 12-27-2012, 10:11 PM

Not gonna seperate, thanks.

circa73 · 12-27-2012, 10:13 PM

If you change your mind, please PM me.

GMC66 · 12-27-2012, 10:16 PM

Will do, thanks.

MP33 · 12-29-2012, 10:13 AM

Are all the pulleys a matched set off the same engine? 230-250?

swmnboy · 12-29-2012, 10:50 AM

Do you have pictures of the 6 cyl water pump pulley?

GMC66 · 12-29-2012, 11:18 AM

Quote:

Originally Posted by MP33

Are all the pulleys a matched set off the same engine? 230-250?

Yes, altenator and waterpump in photo. Pump and brackets have been sold.

GMC66 · 12-29-2012, 11:20 AM

Waterpump pulley #2

MP33 · 12-29-2012, 11:37 AM

You wouldn't happen the have the crank pulley to go with that set would you?

Quote:

Originally Posted by GMC66

Yes, altenator and waterpump in photo. Pump and brackets have been sold.

GMC66 · 12-29-2012, 11:51 AM

Yes, I do.

rtk434 · 12-29-2012, 02:33 PM

Interested in the rear view mirror. How much shipped to 19505
Posted via Mobile Device

GMC66 · 12-29-2012, 02:41 PM

Im not sure, how bout $12 shipped?
Posted via Mobile Device

rtk434 · 12-29-2012, 03:01 PM

Works for me. Do you take PayPal?
Posted via Mobile Device

GMC66 · 12-29-2012, 03:17 PM

Sure, PM sent.
Posted via Mobile Device

swmnboy · 12-29-2012, 05:45 PM

Is there a difference in the waterpump pulleys in post 13 and 14?I need one without the quarter inch space between the pulleys.

rtk434 · 12-29-2012, 06:42 PM

Payment sent for mirror.

GMC66 · 12-29-2012, 06:50 PM

Copy, will get it shipped Monday, thanks.
Posted via Mobile Device

GMC66 · 12-30-2012, 10:57 PM

ttt

TxRat · 12-30-2012, 11:29 PM

would you take $10 plus shipping for two of the C10 emblems to 77706?

12-27-2012, 04:09 PM	#1
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Rare 60-63 GMC Custom Door Trim (No dents)-$125 + shipping Taillight lenses-$10 pr + shipping Chevy horn ring-$10 + shipping 292 intake and exhaust, not cracked but 1 of 3 studs broken-SOLD 292 Monojet carb-$35 + shipping C10 side badges-SOLD GMC Custom Badges-$40 + shipping Rearview mirror-SOLD Chevy 6 cyl double groove water pump pulley-$18 + shipping Matching double groove waterpump/altenator pulleys-$45 +shipping Parting out 1971 292, no air cleaner, balancer. Last edited by GMC66; 01-18-2013 at 11:54 PM. Reason: Pics

12-27-2012, 08:22 PM	#3
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc where about you located in va... __________________ 1964 BBC 402 4x4

12-27-2012, 08:31 PM	#4
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Smithfield, near Newport News

12-27-2012, 09:55 PM	#5
circa73 Registered User Join Date: Mar 2010 Location: Ebony Virginia Posts: 57	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Where is the stud broken? Is it into the casting, or broken below the casting?

12-27-2012, 10:01 PM	#6
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc It has about 1/4 inch sticking out the bottom of the exhaust flange.

12-27-2012, 07:46 PM	#2
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Power steering brackets with pump sold. Still have another set without pump. Also still have the pulleys. Posted via Mobile Device

12-27-2012, 10:07 PM	#7
circa73 Registered User Join Date: Mar 2010 Location: Ebony Virginia Posts: 57	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc I need an exhaust manifold, but not an intake. If you can separate, please give me a price.

12-27-2012, 10:11 PM	#8
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Not gonna seperate, thanks.

12-27-2012, 10:13 PM	#9
circa73 Registered User Join Date: Mar 2010 Location: Ebony Virginia Posts: 57	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc If you change your mind, please PM me.

12-27-2012, 10:16 PM	#10
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Will do, thanks.

12-29-2012, 10:13 AM	#11
MP33 Registered User Join Date: Feb 2004 Location: Central Wisconsin Posts: 153	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Are all the pulleys a matched set off the same engine? 230-250?

12-29-2012, 10:50 AM	#12
swmnboy Registered User Join Date: Sep 2008 Location: Ellsworth,MN Posts: 26	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Do you have pictures of the 6 cyl water pump pulley?

12-29-2012, 11:20 AM	#14
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Waterpump pulley #2

12-29-2012, 11:51 AM	#16
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Yes, I do.

12-29-2012, 02:33 PM	#17
rtk434 Registered User Join Date: Oct 2012 Location: Bechtelsville PA Posts: 54	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Interested in the rear view mirror. How much shipped to 19505 Posted via Mobile Device __________________ Jeff Moyer 65 LWB fleetside 292 4 speed 85 Camaro 436" SBC with a little nitrous 8.12 @ 169 in street trim



Register or Log In To remove these advertisements.

12-29-2012, 02:41 PM	#18
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Im not sure, how bout $12 shipped? Posted via Mobile Device

12-29-2012, 03:01 PM	#19
rtk434 Registered User Join Date: Oct 2012 Location: Bechtelsville PA Posts: 54	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Works for me. Do you take PayPal? Posted via Mobile Device __________________ Jeff Moyer 65 LWB fleetside 292 4 speed 85 Camaro 436" SBC with a little nitrous 8.12 @ 169 in street trim

12-29-2012, 03:17 PM	#20
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Sure, PM sent. Posted via Mobile Device

12-29-2012, 05:45 PM	#21
swmnboy Registered User Join Date: Sep 2008 Location: Ellsworth,MN Posts: 26	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Is there a difference in the waterpump pulleys in post 13 and 14?I need one without the quarter inch space between the pulleys.

12-29-2012, 06:42 PM	#22
rtk434 Registered User Join Date: Oct 2012 Location: Bechtelsville PA Posts: 54	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Payment sent for mirror. __________________ Jeff Moyer 65 LWB fleetside 292 4 speed 85 Camaro 436" SBC with a little nitrous 8.12 @ 169 in street trim

12-29-2012, 06:50 PM	#23
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc Copy, will get it shipped Monday, thanks. Posted via Mobile Device

12-30-2012, 10:57 PM	#24
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc ttt

12-30-2012, 11:29 PM	#25
TxRat Registered User Join Date: Dec 2010 Location: Beaumont Texas Posts: 190	Re: Chevy/GMC Parts/ 6 cyl P/S brackets/Custom trim/292 etc would you take $10 plus shipping for two of the C10 emblems to 77706?

Register or Log In To remove these advertisements.