Ididit column for 47-54

[PurdueSD]

Ive been looking at picking up an ididit column for my truck. Ididit's application specific column for my truck says its a 1" DD. From everything ive seen it looks most people use 3/4 DD. It will be connecting to the t-bird rack that came in my scotts ifs. As im sure you know itermediate shaft space isnt exactly plentiful on these trucks with a sbc. Anybody know what the deal with the 1" vs 3/4"s is?

Ididit part # 1120651020 is the one im looking at. It is no key and floor shift.
Anything else to consider?
Posted via Mobile Device

[Scottshotrods]

Originally Posted by PurdueSD

Ive been looking at picking up an ididit column for my truck. Ididit's application specific column for my truck says its a 1" DD. From everything ive seen it looks most people use 3/4 DD. It will be connecting to the t-bird rack that came in my scotts ifs. As im sure you know itermediate shaft space isnt exactly plentiful on these trucks with a sbc. Anybody know what the deal with the 1" vs 3/4"s is?

Ididit part # 1120651020 is the one im looking at. It is no key and floor shift.
Anything else to consider?
Posted via Mobile Device

On the ididit column you will need a 30 inch column.For the steering u-joints you will need a total of 3 to work with your rack from us.

1.1 inch d/d x 3/4 d/d u-joint for the column
2.3/4 x 3/4 d/d u-joint for the frame
3.3/4 x 36 x 3/4 d/d u-joint for the power rack
4.3/4 d/d shaft for the steering
5.3/4 bung for the frame to secure the hime
6.3/4 hime
7.Ididit tilt steel column
8.Column drop
9.Floor mount

I can help you out for sure on the above list of parts you will need for your truck.For the 1 inch d/d on the column this is what we have been installing in our shop for over 15 years.

For Ididit this is the only column out there that comes with a lifetime warranty.This is the only column that is made in the USA 100%.This column also has 100% gm internal parts in the column.

Justin

[Dan in Pasadena]

Now there's some customer service for you. You didn't even call them and they heard your needs & responded!
Posted via Mobile Device

[NEWFISHER]

Awsome!

[solidaxel]

Justin takes care of his customers!

[rollinrooster]

Justin nows his stuff and has some of the best customer support!!

[PurdueSD]

Thanks Justin, I didnt realize the 1" to 3/4" universal is how it was done. Ill shoot you an email here in a bit.

Anybody know if the stock column drop will work with this column? The billety stuff doesnt really go with what ive got in mind.

[Scottshotrods]

The stock column drop will not work with the new ididit column.

We have our drop that is a tubular s.s column drop looks great take a look at it on our site
www.scottshotrods.com

[PurdueSD]

What is the diameter of the column where the column drop bolts up?

Are the joints you supply borgeson?

[Scottshotrods]

[QUOTE=PurdueSD;5811413]What is the diameter of the column where the column drop bolts up?

Are the joints you supply borgeson?[/QUOTE

Two inches dia

One more thing you can do if you want something to be more in line with what you are building.You can take some 3/4 dia 120 wall tubing and tig weld these to your column and this will act as your drop and then you will need to weld on a mounting plate.You should use 3/16 plate and this will mount to your dash or the mount you will make to secure the column.

Just a idea

Justin

[Scottshotrods]

The u-joints we sell

1.Uni-steer
2.Borgeanson