LA WTB Wall art parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Darren MagooGardner · 02-01-2013, 01:25 AM

I am looking for a few parts to comlete my wal-art projects. For the dash I need a bronze ash tray. My frontend needs a halfway decent inner grill. The one that is in it was melted in an engine compartment fire. I know its a long shot but I need a C for my CONOCO.
thanks for looking.

nobolt · 02-06-2013, 04:34 AM

http://cgi.ebay.com/ebaymotors/1971-...item3f18ef08f7

i dont know if i posted this right.....$22 buy it now on ebay(not mine)

jeffg1010 · 02-06-2013, 08:54 AM

I don't know O-No! Co. Sounds like a company I'd run.

it seems like I say that a lot. Haha.
How are you gonna do the clip? I just did some front end wall art myself. I still needs some trim, but it's close to finished.

Posted via Mobile Device

Darren MagooGardner · 02-06-2013, 12:41 PM

Quote:

Originally Posted by jeffg1010

I don't know O-No! Co. Sounds like a company I'd run.

it seems like I say that a lot. Haha.
How are you gonna do the clip? I just did some front end wall art myself. I still needs some trim, but it's close to finished.

Posted via Mobile Device

Thanks, Did you leave the core support in yours? I cut mine today. I was wondering how to mount the headlites without the core? I still need a front bumper for mine.

sboris · 02-06-2013, 07:28 PM

Hey Darren I like your garage. Make sure to take pics of the clip mounted!

Jeffg1010, is that part of my old Chevy up there? Looks sweet.
Posted via Mobile Device

budnikguy · 02-06-2013, 08:59 PM

Man this is cool stuff guys....would love to see how it is all mounted and suggestions from you who have done it!!

jeffg1010 · 02-06-2013, 10:16 PM

Quote:

Originally Posted by sboris

Jeffg1010, is that part of my old Chevy up there? Looks sweet.
Posted via Mobile Device

Yep... ha! I was wondering if you ever saw it. The pieces worked great. Thanks!

Quote:

Originally Posted by Darren MagooGardner

Thanks, Did you leave the core support in yours? I cut mine today. I was wondering how to mount the headlites without the core? I still need a front bumper for mine.

Nope, no core support. I built a wood "core support" that mounts to the wall and then mounted the headlight buckets to the wood. much lighter and easier to work with (and screw into place) I didn't use the factory light harness either. I busted the back of the old headlights and installed a 110 ready light socket in both lights and the park lights. Simple, safer and they have their own on/off switch so I can turn them off easy.

I bolted the fender sections to the grille using their original bolts and I just set that piece in place over the headlights. It probably sounds crazy now, but it worked REALLY well. In fact, I dont even think I ever bolted the hood to anything. It sits up there perfect without any assistance or mounts. You can see in the photo that I also cut a rectangle piece of MDF to hide the 2"x4" that ran across as the skeleton of the wooden mount. But the rectangle also gave a solid black backdrop so you couldn't see the white wall through the grille holes.

Darren MagooGardner · 02-07-2013, 12:28 AM

Thats the ticket!!! I like that. I hope you dont mind if I copy that idea of the lights and no core support. Here is where I am at this time..
I am still looking for a decent front bumper and a rear roll pan. I guess I can sell my core support if any one needs one.

Darren MagooGardner · 02-07-2013, 12:38 AM

Quote:

Originally Posted by nobolt

http://cgi.ebay.com/ebaymotors/1971-...item3f18ef08f7

i dont know if i posted this right.....$22 buy it now on ebay(not mine)

Thanks for the tip. I looked at it already. I found a bronze one for 4.00 at UPULLIT where I got the hood and tailgate.

nobolt · 02-07-2013, 04:37 AM

this part of michigan hasnt embraced the "upullit" concept. a truck yard near me sends a yard man out with you to locate wrecks for you. and they only deal with newer models.

someday maybe.......

Darren MagooGardner · 02-07-2013, 09:42 AM

Quote:

Originally Posted by nobolt

this part of michigan hasnt embraced the "upullit" concept. a truck yard near me sends a yard man out with you to locate wrecks for you. and they only deal with newer models.

someday maybe.......

That is so sad. Going to the upullit is like going to the fair!! My mouth starts to water when I walk in.

wuss721 · 11-26-2013, 04:08 AM

Do u have any picture of the cutting part?

darkhorse970 · 11-27-2013, 08:27 AM

Quote:

Originally Posted by jeffg1010

I just did some front end wall art myself. I still needs some trim, but it's close to finished.

Posted via Mobile Device

I like it!

**Jurassic-1** · 11-27-2013, 11:12 PM

This is my wall art. It is a bit more compete now. These are older pictures when the garage was a lot cleaner.

**68bowtie** · 11-28-2013, 01:47 AM

Quote:

Originally Posted by jeffg1010

I don't know O-No! Co. Sounds like a company I'd run.

it seems like I say that a lot. Haha.
How are you gonna do the clip? I just did some front end wall art myself. I still needs some trim, but it's close to finished.

Posted via Mobile Device

i saw this in the wall art thread a while back. awesome! i actually bought a rough 67 nose last month that im going to copy your idea with. thanks for the pointers!

**Jurassic-1** · 11-28-2013, 11:02 AM

I thought using a rear bed floor and bed sides and tailgate mounted to the wall so you could put a pair of bar stools and have a fold up type table when you do not need it.

boynton · 11-30-2013, 07:04 PM

I have a decent 72 black dash pad if you are interested

02-01-2013, 01:25 AM	#1
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	WTB Wall art parts I am looking for a few parts to comlete my wal-art projects. For the dash I need a bronze ash tray. My frontend needs a halfway decent inner grill. The one that is in it was melted in an engine compartment fire. I know its a long shot but I need a C for my CONOCO. thanks for looking. Attached Images

02-06-2013, 04:34 AM	#2
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: WTB Wall art parts http://cgi.ebay.com/ebaymotors/1971-...item3f18ef08f7 i dont know if i posted this right.....$22 buy it now on ebay(not mine) __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

02-06-2013, 08:54 AM	#3
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: WTB Wall art parts I don't know O-No! Co. Sounds like a company I'd run. it seems like I say that a lot. Haha. How are you gonna do the clip? I just did some front end wall art myself. I still needs some trim, but it's close to finished. Posted via Mobile Device __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

02-06-2013, 07:28 PM	#5
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,017	Re: WTB Wall art parts Hey Darren I like your garage. Make sure to take pics of the clip mounted! Jeffg1010, is that part of my old Chevy up there? Looks sweet. Posted via Mobile Device __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

02-06-2013, 08:59 PM	#6
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: WTB Wall art parts Man this is cool stuff guys....would love to see how it is all mounted and suggestions from you who have done it!!

02-07-2013, 12:28 AM	#8
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	Re: WTB Wall art parts Thats the ticket!!! I like that. I hope you dont mind if I copy that idea of the lights and no core support. Here is where I am at this time.. I am still looking for a decent front bumper and a rear roll pan. I guess I can sell my core support if any one needs one. Attached Images

02-07-2013, 04:37 AM	#10
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: WTB Wall art parts this part of michigan hasnt embraced the "upullit" concept. a truck yard near me sends a yard man out with you to locate wrecks for you. and they only deal with newer models. someday maybe....... __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

11-26-2013, 04:08 AM	#12
wuss721 Registered User Join Date: Dec 2011 Location: McFarland, CA Posts: 55	Re: WTB Wall art parts Do u have any picture of the cutting part?

11-27-2013, 11:12 PM	#14
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: WTB Wall art parts This is my wall art. It is a bit more compete now. These are older pictures when the garage was a lot cleaner. Attached Images

11-28-2013, 11:02 AM	#16
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: WTB Wall art parts I thought using a rear bed floor and bed sides and tailgate mounted to the wall so you could put a pair of bar stools and have a fold up type table when you do not need it.

11-30-2013, 07:04 PM	#17
boynton Registered User Join Date: Feb 2012 Location: Salado, Texas Posts: 1,415	Re: WTB Wall art parts I have a decent 72 black dash pad if you are interested __________________ Just trying to figure this out... 1970 SWB Step-Side http://67-72chevytrucks.com/vboard/s...d.php?t=552980 1970 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=584499 1970 SWB One Owner Step Side 6.0 LY6/6L90 http://67-72chevytrucks.com/vboard/s...d.php?t=617630 Junkyard's 1971 short wide http://67-72chevytrucks.com/vboard/s...86#post7531186



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.