I would like to hear your opinion about painting my truck.

[rs74]

I am in the middle of a build and was just going to repaint my 85 the same colors. They can be seen in my avatar. However I have always liked the gunmetal gray trucks too. If I go back to the colors it was then there is no side trim except fender well trim and fender badges. No cab trim except drip rails.

Now if I go with the gunmetal then I would probably do all side and cab trim plus the fender wells and badging. The gray has a more classy look to it I think. Although the burgandy and silver has a bit more pizazz to it. Keep in mind this will have a 4/6 drop on WV 037 vette rallies and a probably put on my cowl induction hood. Still up in the air about putting the roll pan on or just puttin the step bumper back on. In the end it is my decision and what I make I have to live with but I would like to hear what everyone thinks. I will put up a couple of pics of what the truck looked like and one or two of gray trucks.

[meatwagon83]

i would go with the two tone

[king-918]

solid two tones just look kind of dated to me

[donut]

I personally like the 2 tone. Yes it does look kinda dated, but so is the body style.
How much would have to be changed in the interior if you went all grey?

Bottom line is what ever you decide, you have to live with.

[76C10Stepside]

The truck in second photo looks great! I love red cars in general, never had a red truck. The burgundy metallic does not thrill me. Not crazy about silver unless it's got high metallic content and many clear coats to really bring it out. Most silver paint jobs are drab. So, I sez go with the gunmetal or something else. What color is your interior?

[68Timber]

The current colors don't look factory. As much as I like 2-tones, that grey looks good.

[Skunksmash]

I'd go with the grey. It is still a prime choice for my truck as well.

[mrhino]

Mix HOK Orion silver with galaxy gray. have your own custom kolor. High metallic count as well

[rs74]

Originally Posted by donut

I personally like the 2 tone. Yes it does look kinda dated, but so is the body style.
How much would have to be changed in the interior if you went all grey?

Bottom line is what ever you decide, you have to live with.

The interior is the factory burgandy. I had thought about what it would take to switch it over. Regardless of the color on the interior I will still have to replace the carpet, headliner, dash pad and seat upholstery. Then I would just have to paint the inner cab and get all the gray trim pieces. The gray interior trim seems to be one of the harder colors to get ahold of.

I like the gray cause I think it can look a little classy I guess but at the same time it is kind of plain. I do believe current colors are more attention getting. Who knows what I will do. Still trying to decide. I still have time before I have to make my decision.Of course I could go the other way and paint it white. Always like them too. My body guy told me to just drive around and maybe hit some car lots and see if there were any colors that I liked. It sounded like he wouldn't be able to match the current colors. All he has to compare to are paint chips. Thanks guys, I just wanted to see what you all thought.

[rs74]

Sounds like gray is getting the upper hand. The current colors are not the factory colors like Bruiser stated. The factory color was Apple Red. Victory Red might look good also.

[57rookie]

You can't go wrong with either. I do really prefer the two tone paint though. I have restored trucks with both solid silver base/clear and with two tone and both looked good but if I had a favorite I would have to say the two tone was my favorite.

[Firebirdjones]

Grey = Metallic Primer

Color choice is a tough one (for me) because I like most everything.

Good luck and take your time choosing. You'll be stuck with it when it's done.

[74 stepside]

Here is one I saw at a show. It seemed to get alot of attention with the color combo. Similar to yours.

[76C10Stepside]

Originally Posted by 74 stepside

Here is one I saw at a show. It seemed to get alot of attention with the color combo. Similar to yours.

That's sharp! Unfortunately, I don't think that shade of red would work with the burgundy interior. There are very few colors that work with a burgundy interior. White and silver seem to be the most common factory finishes.

For a squarebody, white, silver or gunmetal metallic insert on the sides look good with the right primary color choice. I agree that grays only look good with high metallic content and lots of clear coats.

If you had a black interior, I'd suggest a medium or medium-dark blue metallic with high metallic content and several coats of clear. Hard to go wrong with that!

[rs74]

Originally Posted by 76C10Stepside

That's sharp! Unfortunately, I don't think that shade of red would work with the burgundy interior. There are very few colors that work with a burgundy interior. White and silver seem to be the most common factory finishes.

For a squarebody, white, silver or gunmetal metallic insert on the sides look good with the right primary color choice. I agree that grays only look good with high metallic content and lots of clear coats.

If you had a black interior, I'd suggest a medium or medium-dark blue metallic with high metallic content and several coats of clear. Hard to go wrong with that!

The original color of my truck is Apple red and doesnt look to far off of the color on that truck. Factory Apple Red with the Burgandy cloth interior. Let me re-phrase that. Apple red and frost(white). I am assuming it was red/white/red.

[rs74]

Originally Posted by 74 stepside

Here is one I saw at a show. It seemed to get alot of attention with the color combo. Similar to yours.

Here is somewhat the flip to that paint job. 1.This is member Duster's truck. 2.Then the 4x4 version. 3.What it should have looked like from the factory. 4.A couple of pics I have saved for future reference.

[76C10Stepside]

If the factory saw fit to paint it Apple red and frost white with burgundy interior and you like those colors, I say go for it. :-)

I like the look of the side trim mounted at the same level as the side marker lights. That is a perfect spot to transition from one top color to a different base color for a two color paint job. IMO, that would be a really good look on a squarebody, especially a short bed. The accent color down the middle looks good on long beds, but makes the shorties look even shorter (too short). For two-tone paint jobs, my preference is to have the lighter tone on top, darker on bottom. All JMO, though.

[naphtali5725]

I have a question about paint, anyone used Kirker paints, or their paint kits?

Also opinion on best primer for an un-sandblasted frame, and cab/bed underside?

[rs74]

Originally Posted by naphtali5725

I have a question about paint, anyone used Kirker paints, or their paint kits?

Also opinion on best primer for an un-sandblasted frame, and cab/bed underside?

I am pretty sure this is the stuff my painter is using on my frame, bottom of cab and bed. Might even do the wheel wells and some odd and ends. I know it is the brand he is using and pretty sure it is the product. Supposed to be comparable to POR 15. http://www.semproducts.com/product-c...n/rust-shield/

[krazy_texan]

If you like the gun metal then I would look at replacing your silver with that and change your burgundy to something darker. I like the 2 tones
Posted via Mobile Device

[N2TRUX]

I have a couple of questions before I offer paint color advice? It seems your planning a resto-mod look with the possible two tones. You mention a cowl hood, and your running a visor. If your keeping the visor, and adding a cowl hood, I wouldn't worry about what looks "factory". Those two items, especially the visor kill the factory look.

[rs74]

Originally Posted by N2TRUX

I have a couple of questions before I offer paint color advice? It seems your planning a resto-mod look with the possible two tones. You mention a cowl hood, and your running a visor. If your keeping the visor, and adding a cowl hood, I wouldn't worry about what looks "factory". Those two items, especially the visor kill the factory look.

I do like somewhat of a factory look but by no means am I trying to stay factory. The visor was on the truck when I bought it and thought I might keep it. I know alot of people detest the visors but I don't mind them. The Harwood hood I have had sitting for about 15 years in the shed waiting to be put on something. I think it has only got a 2 or 3" rise on it. I don't like the ones with the bigger rise. I even have a roll pan sitting around but I am thinking it might look better with a bumper. I don't plan on running any rims other than the vette rallies from WV. I like the two tones as well as solid colored trucks. If it is a solid color then it would have to have all the side trim on it.

I do have to live with whatever I choose but I just have so many things floating around in my head. I am more than willing to hear anything that you have to say. You won't hurt my feelings any. I might eventually put on a flush mount bed cover but that will be later.

[rs74]

N2TRUX, I guess maybe I should say that I am not wanting any kind of wild paint job. Just something that is more along the lines of a factory look be it with or without the add ons. Nothing has been set in stone about the hood, visor, or roll pan. My thoughts have been to build this truck and either a short bed 4x4 or a K30. With that said I thought I might put the cowl hood on the C10 verse putting it on a K truck. I do have a nice factory hood on the C10 now with hood emblem. I will be putting on the GM doors and fenders that I still have in the boxes not that it has anything to do with the paint.

[rs74]

For a solid colored truck I like this look with maybe the addition of the cowl hood. Mine will set about the way this one does with the same wheels. Mine has a different grill and bumper on it.

[77blazerchalet]

Compromise and go with a two tone gray?