?about motor mounts on a 70 Chevy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PaulMoore · 03-08-2013, 12:33 PM

It had a 6 cylinder and I'm putting a 350 in it can i use the same motor mounts or do I need to move them or get different ones?
Posted via Mobile Device

**lolife99** · 03-08-2013, 12:51 PM

I would get the correct sbc frame stands, and move them to the correct forward position for a V8.

PaulMoore · 03-09-2013, 03:29 PM

Has anyone use the 6cylinder mounts with their 350 ?
Posted via Mobile Device

Tx Firefighter · 03-09-2013, 08:30 PM

Sure. Many times. It just makes the distributor sit closer to the firewall than some guys are comfortable with. I've done it several times in various trucks. The hei distributor will still fully clear the firewall and can be installed and removed without interference so it never causes me any heartache.

The beauty of doing it this way is that the rest of your drivetrain is unaffected and you don't have to go to the trouble and expense of modifying driveshaft and all of that associated stuff.
Posted via Mobile Device

Lattimer · 03-09-2013, 10:39 PM

My 327 sits on the 6 cyl mounts and its fine. Distributor is a little close to the firewall, but I have lots of room in front.

03-08-2013, 12:33 PM	#1
PaulMoore Registered User Join Date: Feb 2013 Location: Henryetta oklahoma Posts: 6	?about motor mounts on a 70 Chevy It had a 6 cylinder and I'm putting a 350 in it can i use the same motor mounts or do I need to move them or get different ones? Posted via Mobile Device

03-08-2013, 12:51 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,717	Re: ?about motor mounts on a 70 Chevy I would get the correct sbc frame stands, and move them to the correct forward position for a V8. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-09-2013, 03:29 PM	#3
PaulMoore Registered User Join Date: Feb 2013 Location: Henryetta oklahoma Posts: 6	Re: ?about motor mounts on a 70 Chevy Has anyone use the 6cylinder mounts with their 350 ? Posted via Mobile Device

03-09-2013, 08:30 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: ?about motor mounts on a 70 Chevy Sure. Many times. It just makes the distributor sit closer to the firewall than some guys are comfortable with. I've done it several times in various trucks. The hei distributor will still fully clear the firewall and can be installed and removed without interference so it never causes me any heartache. The beauty of doing it this way is that the rest of your drivetrain is unaffected and you don't have to go to the trouble and expense of modifying driveshaft and all of that associated stuff. Posted via Mobile Device

03-09-2013, 10:39 PM	#5
Lattimer Registered User Join Date: Jan 2013 Location: Mickleton, NJ Posts: 1,776	Re: ?about motor mounts on a 70 Chevy My 327 sits on the 6 cyl mounts and its fine. Distributor is a little close to the firewall, but I have lots of room in front. __________________ Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.