|
03-14-2013, 06:03 PM
|
#1 |
|
tobins 52 gmc
Join Date: Dec 2007
Location: Holland landing ,ont, Can
Posts: 193
|
E brake help
need some ideas for the E brake .I have a camaro rear and a original frame ,pic if you have, Thanks for all your help.Robert
|
|
|
|
03-14-2013, 06:36 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: E brake help
Have you got any of the original E brake hardware still on the truck or are you starting from scratch?
I put a kick panel/firewall mounted pedal E brake setup in my 48 out of some donor rig I had and fixed tabs to the frame to hold the Cable housings from the rear end and had a new cable made up to go between the two cables and attach to the cable from the foot pedal much the same as it would be under the rig the rear end came out of. It works pretty well. A local shop swagged the sleeve on the cable to shorten it for me.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
03-14-2013, 08:37 PM
|
#3 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: E brake help
I found that 74ish truck foot e brakes have the same mounting hole spacing as the 58-59 hood hinge bolts. I mounted it and used the 74 cable to the relocated cable pulley wheel, stock 59 back to the 74 cables into the rear end. I got creative with cable loops and swag fitting to tie cables together. Release handle mounts under the dash.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
|
03-14-2013, 09:37 PM
|
#4 |
|
Registered User
Join Date: Aug 2011
Location: B.C. Canada
Posts: 19
|
Re: E brake help
Mine has a 92 chassis with a 10 bolt, I used this under dash unit from Locar http://lokar.com/product-pgs/emergen...op-ebrake.html
A Universal unit and relitively easy to install............Sorry no pics but, it is an excellent fit, very clean and stealthy.  Cheers, Judd Last edited by judd55; 03-14-2013 at 09:48 PM. |
|
|
|
|
03-15-2013, 01:41 PM
|
#5 |
|
Registered User
Join Date: Apr 2010
Location: Granbury ,TX
Posts: 268
|
Re: E brake help
I dont have pic.
Im using all Original E-brake Hardware on my 52 with a Camaro rear end. You can buy adjustable Cables from Lokar . |
|
|
|
|
03-15-2013, 10:32 PM
|
#6 |
|
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: E brake help
they made cameros 1967-2013. help us out a little.
__________________
cool, an ogre smiley  Ogre's 58 Truk buildhow to put your truck year and build thread into your signature shop air compressor timer |
|
|
|
|
03-15-2013, 11:54 PM
|
#7 |
|
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
Re: E brake help
I have had good luck with using the stock hardware all the way back to the cable housing and using cables from Control Cables Inc, they will fit "anything"
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
|
|
|
|
03-16-2013, 10:21 AM
|
#8 |
|
tobins 52 gmc
Join Date: Dec 2007
Location: Holland landing ,ont, Can
Posts: 193
|
Re: E brake help
j have a 1980 camaro 10 bolt ,also using a s 10 foot peddle lever.Would like to see the cable and supports and how they are ran along the orginal frame
|
|
|
|
|
03-16-2013, 12:07 PM
|
#9 |
|
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: E brake help
not sure about the gen 2 rears but the gen 3 in my truk uses cables encased in a housing like bike brake cables.
you can mount those any way you can, i suspect gen 2 is similar. buy the gen 2 rear cables and an s10 front cable and fabricate a connector and cable holder i bought new cables from napa 10 yrs ago, still haven't installed them
__________________
cool, an ogre smiley Ogre's 58 Truk buildhow to put your truck year and build thread into your signature shop air compressor timer |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
