|
03-19-2013, 12:00 PM
|
#1 |
|
Registered User
Join Date: Dec 2012
Location: Woolwich Twp, NJ
Posts: 445
|
Hub Centric Rings
So I need a little education - looking to do some smoothies on my 64 stepside.... so I guess I need Hub Centric Rings - I've never dealt with these - has anyone used these - and does any have insight into how you measure for these... completely outside my comfort zone here. Thanks
__________________
64 Step Side - The Mistress |
|
|
|
03-19-2013, 03:03 PM
|
#2 |
|
Registered User
 
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
Re: Hub Centric Rings
hub centric rings help to center the wheels on the hubs. what type of smoothies are you going with ? Chances are you can get by with out the rings.But if you develop a vibration you can use an E.T. style lug nut.
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " |
|
|
|
|
03-19-2013, 03:44 PM
|
#3 |
|
Registered User
Join Date: Dec 2012
Location: Woolwich Twp, NJ
Posts: 445
|
Re: Hub Centric Rings
looking to run some centerline smoothies - I love the look of these
http://www.jegs.com/i/Centerline-Whe...56656/10002/-1 and I can't stand trying to keep chrome on wheels looking nice and figure these are a quick clean
__________________
64 Step Side - The Mistress |
|
|
|
|
03-19-2013, 03:59 PM
|
#4 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,733
|
Re: Hub Centric Rings
Nice lookin' wheels. Too bad the hub is too small!!
|
|
|
|
|
03-19-2013, 04:20 PM
|
#5 |
|
Registered User
Join Date: Dec 2012
Location: Woolwich Twp, NJ
Posts: 445
|
Re: Hub Centric Rings
wouldn't something like this work though -
http://www.jegs.com/i/Centerline+Whe...56655/10002/-1 a bunch of guys run these on our trucks... right?
__________________
64 Step Side - The Mistress |
|
|
|
|
03-19-2013, 05:05 PM
|
#6 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,733
|
Re: Hub Centric Rings
Yes those will work. THe other ones in your other link didn't.
|
|
|
|
|
03-19-2013, 08:26 PM
|
#7 |
|
Senior Member
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,975
|
Re: Hub Centric Rings
not being hub centric on a hub-centric truck with a lug-centric wheel is ok if the hub opening is too large (C/K20 guys do it often by using Ford 3/4 ton wheels on our 3/4 ton trucks). But a too small hub opening is a no-go.
|
|
|
|
|
03-20-2013, 09:30 AM
|
#8 | |
|
Registered User
Join Date: Jan 2013
Location: Imperial, MO
Posts: 1,003
|
Re: Hub Centric Rings
Quote:
|
|
|
|
|
|
03-20-2013, 11:28 PM
|
#9 |
|
Registered User
Join Date: Apr 2010
Location: vancouver wa
Posts: 181
|
Re: Hub Centric Rings
if its 5 lug its a 3 in bore , if its a factory drums its 3.5 , the larger bore center ones
will work but the caps are horriable , i suggest machining the hubs down to 3 and run the 88-98 3 in bore wheels caps is way better Posted via Mobile Device
__________________
///Relaxed Atmosphere |
|
|
|
|
03-21-2013, 02:28 PM
|
#10 |
|
Registered User
Join Date: Dec 2012
Location: Woolwich Twp, NJ
Posts: 445
|
Re: Hub Centric Rings
or just some special hub cabs for for the center like on the Nacho truck right?
__________________
64 Step Side - The Mistress |
|
|
|
|
03-21-2013, 05:32 PM
|
#11 |
|
Registered User
Join Date: Apr 2010
Location: vancouver wa
Posts: 181
|
Re: Hub Centric Rings
yes sir , drill and tap the wheels to use early clips and use what ever cap u want , i like the 55-56 chevy truck cap myself
__________________
///Relaxed Atmosphere |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
