The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-21-2013, 09:19 AM   #1
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
aluminum radiator for a 1965 c10

i want a new radiator with an electric fan that will fit stock location for my 65c10. i found a Champion on ebay for just under $300. any other suggestions?
__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/
corvettejim1968 is offline   Reply With Quote
Old 03-21-2013, 09:25 AM   #2
travz500
Registered User
 
travz500's Avatar
 
Join Date: Sep 2012
Location: ozawkie ks
Posts: 945
Re: aluminum radiator for a 1965 c10

Look up forum vendor pro performance. Travis will hook you up and if your a supporting member he will give discount on shipping very good Guy to deal with
Posted via Mobile Device
Posted via Mobile Device
travz500 is offline   Reply With Quote
Old 03-21-2013, 09:42 AM   #3
66C06
Registered User
 
66C06's Avatar
 
Join Date: Oct 2012
Location: Rockwall, Tx
Posts: 151
Re: aluminum radiator for a 1965 c10

check out entropyrad.com they have some cool stuff....
__________________
66 SWB Stepside: Project C-O6
06 ZO6 MSM 6spd 562/520rw N/A
06 Caddy CTS The Daily
07 Hayabusa - absolute chaos
66C06 is offline   Reply With Quote
Old 03-21-2013, 10:52 AM   #4
Rich 5150 69
Registered User
 
Rich 5150 69's Avatar
 
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
Re: aluminum radiator for a 1965 c10

There`s many of us here running a Champion, fit was great. Slight tweaking of the top bracket, have to use vacuum hose instead of the original rubber isolator.
Her`s a short thread on a few...http://67-72chevytrucks.com/vboard/s...light=champion
Attached Images
 
__________________
`64 C10 vortec 350/350/373 posi
`69 RS/SS 350/350/308
`37 Ford 406/350/324 traclock
`68 Dart 370/904/323 suregrip

Last edited by Rich 5150 69; 03-21-2013 at 10:58 AM.
Rich 5150 69 is offline   Reply With Quote
Old 03-21-2013, 11:31 AM   #5
tincan1966
Registered User
 
tincan1966's Avatar
 
Join Date: Oct 2010
Location: Independence,KS
Posts: 1,477
Re: aluminum radiator for a 1965 c10

It all boils down to you get what you pay for. There are radiators all over the web ranging from $169 to $600.
I personally like the BeCool and Northern brands and usually convert to a crossflow type.
There are several bolt ins available.
One lace I just ran across is Wizard Cooling out of NY, and Cool Craft. Both seemed to be in the intermediate price ranges. Also Alumarad has a decent looking product for the money.

Most people will shop for the cheapest from the mail order places(summit, Jeg's, etc) which is cool. If you find a product with a part number-try Amazon.com- sometimes they will surprise you.
JMO
tincan1966 is offline   Reply With Quote
Old 03-21-2013, 01:01 PM   #6
billd5string
Registered User
 
billd5string's Avatar
 
Join Date: Apr 2012
Location: Las Vegas, NV
Posts: 80
Re: aluminum radiator for a 1965 c10

I'm running a champion in my 65 C20 and haven't had any problems, even in Las Vegas heat. I got the thicker model that is rated up to 600 horsepower though.
__________________
65 C20 Fleetside longbed, 350, turbo 400, 8-lug disc brakes, power steering, air conditioning - Totaled by a guy running a red light. Pulling parts off the carcass for my next truck
billd5string is offline   Reply With Quote
Old 03-21-2013, 01:58 PM   #7
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
Re: aluminum radiator for a 1965 c10

Ditto^^^^^^^^^^^
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 03-21-2013, 04:44 PM   #8
**grumpy**
Registered User
 
**grumpy**'s Avatar
 
Join Date: Feb 2007
Location: NE Ohio
Posts: 737
Re: aluminum radiator for a 1965 c10

I am one of the ones who uses the 140 dollar radiators from Summit.
With alittle minor bracket fabrication, they work great.

Ive used them in 4-5 trucks.

I live 35 minutes from Summit, so I have the advantage of going there, and I pull every rad out of box to verify its not beat the hell.
One time they had to bring 3 out til I was satisfied, but for 140 bucks, I'll take it.
That and a taurus e-fan, is my set up of choice.

It was 105 degrees last july at Goodguys in Columbus. I sat in bumper to bumper traffic and truck never got over 190.
__________________
Tim
Road Hounds
**grumpy** is offline   Reply With Quote
Old 03-29-2013, 07:59 PM   #9
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: aluminum radiator for a 1965 c10

i emailed Ron Davis Radiator this morning and this is what they said.


Good morning Jim. Your cost will be $1136.00 plus tax and you can either pick it up or we can ship it to you.



Thank You,



Bill Williamson



http://www.rondavisradiators.com/

Ron Davis Racing Products, Inc.

7334 North 108th Avenue

Glendale, AZ. 85307

Tel- 623-877-5000 Ext.16

Fax- 623-877-5001

bill@rondavisradiators.com

www.rondavisradiators.com

http://www.facebook.com/rondavisradiators
__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/
corvettejim1968 is offline   Reply With Quote
Old 03-29-2013, 08:09 PM   #10
Rich 5150 69
Registered User
 
Rich 5150 69's Avatar
 
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
Re: aluminum radiator for a 1965 c10

Quote:
Originally Posted by corvettejim1968 View Post
i emailed Ron Davis Radiator this morning and this is what they said.


Good morning Jim. Your cost will be $1136.00 plus tax and you can either pick it up or we can ship it to you.



Thank You,



Bill Williamson



http://www.rondavisradiators.com/

Ron Davis Racing Products, Inc.

7334 North 108th Avenue

Glendale, AZ. 85307

Tel- 623-877-5000 Ext.16

Fax- 623-877-5001

bill@rondavisradiators.com

www.rondavisradiators.com

http://www.facebook.com/rondavisradiators
Ouch....!
__________________
`64 C10 vortec 350/350/373 posi
`69 RS/SS 350/350/308
`37 Ford 406/350/324 traclock
`68 Dart 370/904/323 suregrip
Rich 5150 69 is offline   Reply With Quote
Old 03-29-2013, 11:05 PM   #11
CRGRS 66
Registered User
 
CRGRS 66's Avatar
 
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
Re: aluminum radiator for a 1965 c10

I ordered a champion rad, and sent it back. Both the upper bracket and lower cradles would have to have been cut for it to fit. I guess you get what you pay for, but I felt that if they said the rad would fit my truck... it should have fit my truck...
What I did in the end was send out my original rad for re-coring. Cost a bit more, but I am glad I did.
Kind of doesn't really answer your question, but just thought you might appreciate knowing that you may need to shave your top bracket, and bottom cradles to get the champion to fit.
__________________
Craigerrr

My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709
CRGRS 66 is offline   Reply With Quote
Old 03-30-2013, 01:47 AM   #12
66C06
Registered User
 
66C06's Avatar
 
Join Date: Oct 2012
Location: Rockwall, Tx
Posts: 151
Re: aluminum radiator for a 1965 c10

I just got my entropy radiator and from what my mechanic is telling me, the quality is awesome. I paid 722.31 shipped for mine. It is a bolt in radiator specifically made for an lsx swap (hose connections on the right) no mods required, with efans and harness. They also make a direct fit, no mods required, 2 row aluminum radiator with efans for the factory application good for up to 800hp. 649+shipping. See below.

http://www.entropyrad.com/index.php?...d&productId=15
__________________
66 SWB Stepside: Project C-O6
06 ZO6 MSM 6spd 562/520rw N/A
06 Caddy CTS The Daily
07 Hayabusa - absolute chaos
66C06 is offline   Reply With Quote
Old 07-31-2013, 10:19 PM   #13
SparkyRnD
Registered User
 
SparkyRnD's Avatar
 
Join Date: Dec 2011
Location: acworth georgia
Posts: 890
Re: aluminum radiator for a 1965 c10

I know this is an old thread, but we also make bolt-in aluminum radiators for these trucks, that are hand-made right here in the USA, with no plastic / epoxy. We are a Gold Vendor here as well. We also offer discounts for forum members, and you can take a look at our website here:
http://rndfabrication.com/C10early.html

This is a downflow style we made, and we can make them for any engine combo (no price increase), and transmission coolers are included at no additional cost:

__________________
www.RnDFabrication.com
Custom Radiators, Valve Covers and Overflow Tanks
SparkyRnD is offline   Reply With Quote
Old 07-31-2013, 10:46 PM   #14
gofastnut
Registered User
 
gofastnut's Avatar
 
Join Date: Feb 2011
Location: Williams, CA
Posts: 760
Re: aluminum radiator for a 1965 c10

SparkyRnD, gonna have to keep you guys in mind as I s-l-o-w-l-y build my big block.
__________________
Jeff
96 C3500 Crew Cab Long bed (Waiting on Cool Name)
64 C-10 shortie stepside, "Ole Brownie"
C-10 Club
My achingly slow build: http://67-72chevytrucks.com/vboard/s...d.php?t=508345
gofastnut is offline   Reply With Quote
Old 08-01-2013, 05:17 AM   #15
Sharps40
Account Suspended
 
Join Date: Oct 2012
Location: here
Posts: 2,408
Re: aluminum radiator for a 1965 c10

Brass 3 tube radiator for the V8 trucks from Advance Auto, fits nearly perfect, looks closer to original, has auto trans cooler built in...(slight tweaking of DS lower radiator mount required to clear the DS trans cooler fitting). Ships to yer house free with code P20 and that also nets ya 20% off the price bringin yer total to less than 200 for a solid radiator. I run one in Ol John Lee and in Jr. I detailed installation on a V8 Truck and a 6 cyl Truck on the board here.

http://shop.advanceautoparts.com/web...022%7CL3*15952
Sharps40 is offline   Reply With Quote
Old 08-01-2013, 09:30 AM   #16
bmur66
Registered User
 
Join Date: Feb 2013
Location: Olean, NY
Posts: 92
Re: aluminum radiator for a 1965 c10

Whatever you do.....Do not buy a radiator from this outfit that I will link below'


http://www.speedcooling.com/1963-196...r/prod_37.html

They also sell their junk on Ebay. The radiator looks nice and appears to be well made but mine was defective and had a pinhole where a tube joins the lower tank. This can't be repaired. I didn't know it was bad for months because I wasn't ready to fill it and bring it up to temp until then. I have made multiple attempts to get this joker to honor his 2 year warranty. Will not return messages. Now I have a $200 junk radiator and need to buy a new one. STAY AWAY FROM ENGINEERED COOLING PRODUCTS. They are only cheaper the first time you buy them.

Also my experience with anything made in China is that if you need 3, you better buy 5. Obviously the radiator wasn't pressure tested. It's probably cheaper to replace the bad ones then to test them all.
__________________
No Weak Links

Last edited by bmur66; 08-01-2013 at 09:35 AM.
bmur66 is offline   Reply With Quote
Old 08-01-2013, 09:33 AM   #17
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: aluminum radiator for a 1965 c10

bmur....may be worth a trip to Illinois to get a replacement from them. If you had/have real concerns about this company, id urge you to post in the vender section and post a review so that other members can read about the concerns you have.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 08-01-2013, 09:50 AM   #18
bmur66
Registered User
 
Join Date: Feb 2013
Location: Olean, NY
Posts: 92
Re: aluminum radiator for a 1965 c10

Will do. We gotta look out for each other. Thanks
__________________
No Weak Links
bmur66 is offline   Reply With Quote
Old 08-01-2013, 09:54 AM   #19
SparkyRnD
Registered User
 
SparkyRnD's Avatar
 
Join Date: Dec 2011
Location: acworth georgia
Posts: 890
Re: aluminum radiator for a 1965 c10

Quite a few of our customers are former Entropy customers. Ours may not be the least expensive, but they are made here in America and we take pride in what we build.
__________________
www.RnDFabrication.com
Custom Radiators, Valve Covers and Overflow Tanks
SparkyRnD is offline   Reply With Quote
Old 08-01-2013, 09:59 AM   #20
bmur66
Registered User
 
Join Date: Feb 2013
Location: Olean, NY
Posts: 92
Re: aluminum radiator for a 1965 c10

Also regarding Ron Davis Radiators. Those guys are the best at what they do. They were extremely helpful on the phone and seemed to genuinely enjoy talking about them. They gave me the lowdown on radiators and what you really need for what you want to do. The thing is they are the best and their customer is the guy who doesn't accept failure as an option. Like big time race teams who can afford to pay for that kind of quality. I just want a decent one that works and doesn't leak. SparkyRnD I may be giving you a call. Made in USA means alot to me.
__________________
No Weak Links
bmur66 is offline   Reply With Quote
Old 08-01-2013, 11:11 AM   #21
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Thumbs up Re: aluminum radiator for a 1965 c10

Makes a big difference on getting new customers and keeping old ones.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 08-01-2013, 11:12 AM   #22
rideblue00
Senior Member
 
rideblue00's Avatar
 
Join Date: Feb 2010
Location: Lambertville, MI
Posts: 1,865
Re: aluminum radiator for a 1965 c10

Subcribed!
Posted via Mobile Device
rideblue00 is offline   Reply With Quote
Old 08-01-2013, 11:48 AM   #23
Racer2172
Senior Member
 
Join Date: Nov 2011
Location: Yuma, AZ
Posts: 319
Re: aluminum radiator for a 1965 c10

subscribed now with two 65 c-10 in the shop
__________________
65 C-10 Times gone by(Sons truck)http://67-72chevytrucks.com/vboard/s...92#post6164692
70 C-30 Tow truck AKA Highlighter
02 Silverado 2500 HD CUCVII Tow Rig/DD
1968 C10 Project Quarantine http://67-72chevytrucks.com/vboard/s...d.php?t=804800
1980 Buick Regal Dirt Stock car
Racer2172 is offline   Reply With Quote
Old 08-03-2013, 08:43 AM   #24
SparkyRnD
Registered User
 
SparkyRnD's Avatar
 
Join Date: Dec 2011
Location: acworth georgia
Posts: 890
Re: aluminum radiator for a 1965 c10

Quote:
Originally Posted by bmur66 View Post
Made in USA means alot to me.
Same here, which is why we take pride in what we make. We understand that many customers out there don't have a lot to spend, and every dollar counts. That is why we built a top quality product that is made here in the USA (supporting US jobs), and we make sure that we build a product that will last and will outperform the cheap imports. While I like to save money myself, I would rather support US companies and my neighbors when and where I can.

Also, we do offer a discount to forum members (just mention it when ordering). Retail on our radiator is $450, and the discounted member price is $425. If anyone has any questions or wants a quote, you can email me or contact me through PM.
__________________
www.RnDFabrication.com
Custom Radiators, Valve Covers and Overflow Tanks
SparkyRnD is offline   Reply With Quote
Old 08-03-2013, 09:20 AM   #25
LDO
Registered User
 
LDO's Avatar
 
Join Date: Feb 2011
Location: Senatobia, MS
Posts: 1,297
Re: aluminum radiator for a 1965 c10

Quote:
Originally Posted by SparkyRnD View Post
Same here, which is why we take pride in what we make. We understand that many customers out there don't have a lot to spend, and every dollar counts. That is why we built a top quality product that is made here in the USA (supporting US jobs), and we make sure that we build a product that will last and will outperform the cheap imports. While I like to save money myself, I would rather support US companies and my neighbors when and where I can.

Also, we do offer a discount to forum members (just mention it when ordering). Retail on our radiator is $450, and the discounted member price is $425. If anyone has any questions or wants a quote, you can email me or contact me through PM.
Does that include a shroud and fan? And do you have any pictures of them? Working on a 66.
LDO is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com