|
03-30-2013, 08:22 PM
|
#1 |
|
Registered User
 
Join Date: Jul 2009
Location: Perley,MN,US
Posts: 151
|
Frame Tweak
I have a 63 chevy half ton 4x4, after getting the box on I noticed that on the drivers side the box slants to the front, the trim lines line up on the front of the box with the cab and the passernger side of the box is level but the frivers side sits up half an inch higher in the rear than the passenger side. Dose anyone have any ideas on whats going on here?
__________________
1961 GMC 4X4 1960 GMC 2X4 1967 GMC 4X4-Flatbed 1976 Chevy 4x4 |
|
|
|
03-30-2013, 09:23 PM
|
#2 |
|
Registered User
Join Date: Sep 2008
Location: San Carlos, Ca.
Posts: 3,048
|
Re: Frame Tweak
I don't exactly know but yours isn't the first that I've heard of being tweaked. Mine front end sits down 1-1/4 ". Not noticeable to most but it makes me crazy. One day I'll take it to a body shop to have the frame checked. Can yours be shimmed ?
Posted via Mobile Device
__________________
Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205  52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29 |
|
|
|
|
03-30-2013, 09:47 PM
|
#3 |
|
Registered User
Join Date: Jul 2009
Location: Perley,MN,US
Posts: 151
|
Re: Frame Tweak
Ya same here and that 1/2 inch really shows over 8 feet of box! I could shim it but the both side would look kitty whompass, I dont know if i could take the axel spacer out and mill it down or something aong those lines. my only option really is to some how lower the drivers side rear.
__________________
1961 GMC 4X4 1960 GMC 2X4 1967 GMC 4X4-Flatbed 1976 Chevy 4x4 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
