|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-03-2013, 12:35 AM
|
#1 |
|
Registered User
Join Date: Nov 2012
Location: santa rosa,california
Posts: 650
|
1974 4X4 Front Hub Question
I am putting new hubs on my truck and need to know were the big wire ring in the enclosed picture goes?
I am thinking it goes on first then the splined piece then the clip holds it in place then the actual hub itself bolts to the splined piece? Lynn |
|
|
|
04-03-2013, 12:41 AM
|
#2 |
|
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: 1974 4X4 Front Hub Question
Splined section FIRST. Big ring is an internal style ring, snaps into the edge of the cast iron hub bore. Small ring is an external style ring, snaps onto the stub shaft. Bolt the outer dial to the splined portion, done.
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
|
|
|
|
04-03-2013, 12:42 AM
|
#3 |
|
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: 1974 4X4 Front Hub Question
 Slightly different assembly, referencing for illustration. Also: 
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
|
|
|
|
04-03-2013, 12:47 AM
|
#4 |
|
Registered User
Join Date: Nov 2012
Location: santa rosa,california
Posts: 650
|
Re: 1974 4X4 Front Hub Question
Devin
Thanks A Million!!! Lynn |
|
|
|
|
04-03-2013, 12:56 AM
|
#5 |
|
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: 1974 4X4 Front Hub Question
No problemo, you are welcome. Always happy to help out.
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
