|
04-03-2013, 10:48 PM
|
#1 |
|
Registered User
Join Date: Mar 2013
Location: central coast monterey county california
Posts: 348
|
removing axles
first time removing axles from my 66 c10,getting drilled from 6 lug to 5?any suggestions?
|
|
|
|
04-03-2013, 11:08 PM
|
#2 |
|
Registered User
Join Date: Dec 2007
Location: Billerica, MA
Posts: 329
|
Re: removing axles
Remove wheels, remove drums, pop rear diff cover, drain oil, remove cross shaft pin bolt, remove cross shaft, tap axles inward just enough to allow c-clips to drop out, then pull axles out.
|
|
|
|
|
04-04-2013, 12:11 AM
|
#3 |
|
Registered User
Join Date: Mar 2013
Location: central coast monterey county california
Posts: 348
|
Re: removing axles
awsome thanks.im still debating wether i should get them drilled out.or just doing the conversion swap.
|
|
|
|
|
04-04-2013, 12:22 AM
|
#4 |
|
Registered User
Join Date: Aug 2012
Location: Rathdrum ID
Posts: 1,129
|
Re: removing axles
While you have them out you might as well change the seals and maybe the bearings.
__________________
66 shorty 
|
|
|
|
|
04-04-2013, 07:48 AM
|
#5 |
|
Registered User
Join Date: Oct 2010
Location: Independence,KS
Posts: 1,477
|
Re: removing axles
Most importantly, DO NOT rotate the differential gears(turn the driveshaft) once the cross pin is removed. If you do, you will have to realign the spider gears. It's not disastrous, but time consuming and frustrating.
|
|
|
|
|
04-06-2013, 01:46 AM
|
#6 |
|
Registered User
Join Date: Mar 2013
Location: central coast monterey county california
Posts: 348
|
Re: removing axles
thax for the great tips fellas
|
|
|
|
|
04-06-2013, 02:40 PM
|
#7 |
|
Registered User
Join Date: Feb 2013
Location: Cottonwood, Arizona
Posts: 1,382
|
Re: removing axles
I had the original axles on my 65 Suburban re-drilled to a 5 lug patter by Moser in the mid 90's. Simple enough process, just take your time.
|
|
|
|
|
04-16-2013, 12:14 AM
|
#8 |
|
Registered User
Join Date: Mar 2013
Location: central coast monterey county california
Posts: 348
|
Re: removing axles
should seals and bearings be changed if they look so..so
|
|
|
|
|
04-16-2013, 12:17 AM
|
#9 |
|
Registered User
Join Date: Mar 2013
Location: central coast monterey county california
Posts: 348
|
Re: removing axles
finally got my axels back from cooks machine works in e.l.a.drilled to 5on5,cant wait to slap them on.yaaay
|
|
|
|
|
04-16-2013, 07:24 PM
|
#10 |
|
Registered User
Join Date: Aug 2012
Location: Rathdrum ID
Posts: 1,129
|
Re: removing axles
I would change the seals just because you have the axles out and they are cheap.
__________________
66 shorty
|
|
|
|
|
04-16-2013, 08:00 PM
|
#11 | |
|
Registered User
Join Date: Feb 2011
Location: Williams, CA
Posts: 760
|
Re: removing axles
Quote:
Ounce of prevention and all that...
__________________
Jeff 96 C3500 Crew Cab Long bed (Waiting on Cool Name) 64 C-10 shortie stepside, "Ole Brownie" C-10 Club My achingly slow build: http://67-72chevytrucks.com/vboard/s...d.php?t=508345 |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
