pic request bagged with 18 and stock inner fenders

[brans72]

Can I get a picture of a 67 C10 bagged with 18's and stock inner fenders? Nothing crazy P/B with drop members etc looking for simple setup. Thanks Brandon

[Mieser3]

Here is a pic that Reno at AccuAir sent me of a truck running 17's all the way around. This truck is running the Porterbuilt Stage 2 front and rear kits (no Dropmember) and still runs stock inner fenders in the front and back.

[cubber]

here's mine with bolt on bag plates, mild notch, and 2.5" drop spindles. I haven't got my inners painted yet, but there is plenty of room. Sorry my truck is a 69, and my wheels are 17". The main thing is tire diameter. My tire diameter is 27.2 inches. If you know tire diameter, wheel size is less important. these tires are 55 series, in an 18", you might be at the same diameter in a 40 series, so it would tuck the same, you would just have a half inch less tire,and a half inch more rim on each edge, so your clearance in the fender would be the same, but it would make the lip of your rim tuck in a half inch more.

[dylanprice00]

http://sfbay.craigslist.org/nby/cto/3778049417.html