Side window replacement Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dylan86 · 06-07-2013, 11:08 PM

Hey guys, I'm replacing a side window in my 86 c10 with new glass. I've got it all out and removed. I have to swap the track over, I've got the track off the old glass, notice that the rubber inlay is crap and only removing in chunks. what do you suggest using to adhere the window to that track? thanks!

1979cstepside · 06-08-2013, 12:42 AM

iv seen people use stuff like rubber gasket seal in a tube but you should just be able to go online and order a new rubber inlay

Quote:

Originally Posted by Dylan86

Hey guys, I'm replacing a side window in my 86 c10 with new glass. I've got it all out and removed. I have to swap the track over, I've got the track off the old glass, notice that the rubber inlay is crap and only removing in chunks. what do you suggest using to adhere the window to that track? thanks!

KQQL IT · 06-08-2013, 01:31 AM

Any glass shop could do it as well
Posted via Mobile Device

**old Rusty C10** · 06-08-2013, 08:40 AM

get a new gasket and also make sure that the new glass is the same thickness as the old one... I have a few over here and when I needed to replace the one on my 82 I found out some of the older glasses are thicker and make it difficult to roll up especially with new felt

06-07-2013, 11:08 PM	#1
Dylan86 Registered User Join Date: Dec 2012 Location: Lloydminster, Alberta Posts: 88	Side window replacement Question Hey guys, I'm replacing a side window in my 86 c10 with new glass. I've got it all out and removed. I have to swap the track over, I've got the track off the old glass, notice that the rubber inlay is crap and only removing in chunks. what do you suggest using to adhere the window to that track? thanks!

06-08-2013, 01:31 AM	#3
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,257	Re: Side window replacement Question Any glass shop could do it as well Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "

06-08-2013, 08:40 AM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Side window replacement Question get a new gasket and also make sure that the new glass is the same thickness as the old one... I have a few over here and when I needed to replace the one on my 82 I found out some of the older glasses are thicker and make it difficult to roll up especially with new felt __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.