CA Parts from a 78 GMC 3/4 ton 4X4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 06-11-2013, 01:29 AM

I recently parted a loaded 78 GMC. This truck came from the mountains and was very rusty and the TH400 was slipping.
front spring hangers/core support...$50 plus shipping
rear front spring hangers...$26 shipped
4x4 front bumper brackets...$20 plus shipping
spare tire glide out with bracket...$100 plus shipping ***you need the bolt on the driver side to the frame and the bracket on the passenger side was cut at bottom for hitch, but still functioned fine when pulled.
power window motors both work...$50 pair plus shipping
power window harness both sides with boots and switches...$50 shipped
power brake booster/master cylinder working...$30 plus shipping
4x4 transmission crossmember TH400/NP203...$25 plus shipping
auxiliary battery box...$30 plus shipping ***the factory brackets are in great shape, but the tray needs to be replaced.

KrazyRay · 06-11-2013, 01:35 AM

2222

KrazyRay · 06-11-2013, 01:39 AM

33333

**too much stuff** · 06-11-2013, 08:52 AM

Any hubcaps on it?

owner 84 · 06-11-2013, 08:56 AM

I will get the spare tire bracket.
Posted via Mobile Device

owner 84 · 06-11-2013, 08:59 AM

Pm sent
Posted via Mobile Device

ChevySean79 · 06-11-2013, 09:32 AM

Shipping on booster and master to 11757?
Posted via Mobile Device

KrazyRay · 06-11-2013, 09:39 AM

Eric, Sorry no hubcaps on this one.
owner 84, top pic in post #2 is where the cut was made on the bracket.
Sean, I will get shipping quote today or tomorrow.
Thanks,
Ray

**1774btcrew** · 06-11-2013, 03:02 PM

Ray, sending PM

KrazyRay · 06-11-2013, 10:16 PM

Sean, its $30 to ship for a total of $60
owner 84, Here's some pics:

Thanks,
Ray

owner 84 · 06-12-2013, 08:38 AM

Pm sent
Posted via Mobile Device

KrazyRay · 06-12-2013, 03:00 PM

Here's pics of gas tank patch: You will need to fab up a bracket for the filler neck.

owner 84 · 06-13-2013, 12:20 AM

Payment sent for spare tire glide out with bracke
Posted via Mobile Device

owner 84 · 06-13-2013, 11:26 PM

Is it 454 or 350? If 454 it should have right side exhaust hangers on the frame. Can you check them out for me if you would sell them?
Posted via Mobile Device

KrazyRay · 06-14-2013, 12:24 AM

This one had a small block 400.

ChevySean79 · 06-14-2013, 03:03 PM

Check pm krazyray
Posted via Mobile Device

KrazyRay · 06-16-2013, 12:45 PM

pics for Eric

KrazyRay · 06-16-2013, 12:58 PM

more

KrazyRay · 06-16-2013, 01:05 PM

33333

KrazyRay · 06-16-2013, 01:09 PM

one more

54Caddy · 06-17-2013, 12:57 AM

ray will these motors bolt directly in the manual doors?

KrazyRay · 06-17-2013, 01:51 AM

I don't know for sure. I feel sorry for anyone installing these because it was a PITA to remove.

**70STOVEBOLT** · 11-20-2013, 02:07 PM

Ray, do you still have the power window harness and switches?

Thanks,
Mark

KrazyRay · 11-20-2013, 06:18 PM

Yes. Its still available. There are 2 connectors at the firewall that have been replaced.

**70STOVEBOLT** · 11-20-2013, 06:35 PM

Would you go $40 shipped? If so I will take it.

Thanks,
Mark

06-11-2013, 01:29 AM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parts from a 78 GMC 3/4 ton 4X4 I recently parted a loaded 78 GMC. This truck came from the mountains and was very rusty and the TH400 was slipping. front spring hangers/core support...$50 plus shipping rear front spring hangers...$26 shipped 4x4 front bumper brackets...$20 plus shipping spare tire glide out with bracket...$100 plus shipping *you need the bolt on the driver side to the frame and the bracket on the passenger side was cut at bottom for hitch, but still functioned fine when pulled. power window motors both work...$50 pair plus shipping power window harness both sides with boots and switches...$50 shipped power brake booster/master cylinder working...$30 plus shipping 4x4 transmission crossmember TH400/NP203...$25 plus shipping auxiliary battery box...$30 plus shipping *the factory brackets are in great shape, but the tray needs to be replaced. Attached Images

06-11-2013, 01:39 AM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 33333 Attached Images

06-11-2013, 08:52 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,814	Re: Parts from a 78 GMC 3/4 ton 4X4 Any hubcaps on it? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-11-2013, 08:56 AM	#5
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: Parts from a 78 GMC 3/4 ton 4X4 I will get the spare tire bracket. Posted via Mobile Device __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/

06-11-2013, 08:59 AM	#6
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: Parts from a 78 GMC 3/4 ton 4X4 Pm sent Posted via Mobile Device __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/

06-11-2013, 01:35 AM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 2222 Attached Images

06-11-2013, 09:32 AM	#7
ChevySean79 Registered User Join Date: Dec 2010 Location: Lindenhurst NY Posts: 295	Re: Parts from a 78 GMC 3/4 ton 4X4 Shipping on booster and master to 11757? Posted via Mobile Device

06-11-2013, 09:39 AM	#8
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 Eric, Sorry no hubcaps on this one. owner 84, top pic in post #2 is where the cut was made on the bracket. Sean, I will get shipping quote today or tomorrow. Thanks, Ray

06-11-2013, 03:02 PM	#9
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,601	Re: Parts from a 78 GMC 3/4 ton 4X4 Ray, sending PM __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

06-11-2013, 10:16 PM	#10
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 Sean, its $30 to ship for a total of $60 owner 84, Here's some pics: Thanks, Ray Attached Images

06-12-2013, 08:38 AM	#11
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: Parts from a 78 GMC 3/4 ton 4X4 Pm sent Posted via Mobile Device __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/

06-12-2013, 03:00 PM	#12
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 Here's pics of gas tank patch: You will need to fab up a bracket for the filler neck. Attached Images

06-13-2013, 12:20 AM	#13
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: Parts from a 78 GMC 3/4 ton 4X4 Payment sent for spare tire glide out with bracke Posted via Mobile Device __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/

06-13-2013, 11:26 PM	#14
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: Parts from a 78 GMC 3/4 ton 4X4 Is it 454 or 350? If 454 it should have right side exhaust hangers on the frame. Can you check them out for me if you would sell them? Posted via Mobile Device __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/

06-14-2013, 12:24 AM	#15
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 This one had a small block 400.



Register or Log In To remove these advertisements.

06-14-2013, 03:03 PM	#16
ChevySean79 Registered User Join Date: Dec 2010 Location: Lindenhurst NY Posts: 295	Re: Parts from a 78 GMC 3/4 ton 4X4 Check pm krazyray Posted via Mobile Device

06-16-2013, 12:45 PM	#17
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 pics for Eric Attached Images

06-16-2013, 12:58 PM	#18
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 more Attached Images

06-16-2013, 01:05 PM	#19
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 33333 Attached Images

06-16-2013, 01:09 PM	#20
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 one more Attached Images

06-17-2013, 12:57 AM	#21
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,295	Re: Parts from a 78 GMC 3/4 ton 4X4 ray will these motors bolt directly in the manual doors? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

06-17-2013, 01:51 AM	#22
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 I don't know for sure. I feel sorry for anyone installing these because it was a PITA to remove.

11-20-2013, 02:07 PM	#23
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,467	Re: Parts from a 78 GMC 3/4 ton 4X4 Ray, do you still have the power window harness and switches? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-20-2013, 06:18 PM	#24
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parts from a 78 GMC 3/4 ton 4X4 Yes. Its still available. There are 2 connectors at the firewall that have been replaced. Attached Images

11-20-2013, 06:35 PM	#25
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,467	Re: Parts from a 78 GMC 3/4 ton 4X4 Would you go $40 shipped? If so I will take it. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.