Blazer door reassembly order - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Tom Vogel** · 07-05-2013, 10:01 AM

Is this the correct door reassembly order?

1.install regulator

2.install door glass

3.install vent window

4.install rear door glass guide

5.slide in rear door glass glide felt (I know there is a small screw in the top, but do you need to use any 3m rubber adhesive to keep it in the channel?)

6.install door glass squeegees

69-72 · 07-05-2013, 03:47 PM

Add some time for cursing in between each of those.

**jaros44sr** · 07-05-2013, 05:15 PM

Not sure of this Tom, but you may want to assemble the reg. and window without mounting the bolts for the reg. up. Try it outside the door first, and see how it goes together. For some reason it sticks in my head that thats the way i did it. Somehow i supported the weight of the glass, half way in the door, then offered up the reg. to the bottom of the window glass channel

Just dont put your vent window in first, or you will be taking it out like i did to put the window in

I built some j hooks for the wipers out of sheet metal, easy to pull up the clips for the wipers

Let us know how you made out, and what not to do

JayDubBlazer · 07-05-2013, 08:18 PM

Quote:

Originally Posted by 69-72

Add some time for cursing in between each of those.

X2 on the cursing
Posted via Mobile Device

BBrendal · 07-16-2013, 01:02 AM

I just did a disasembly and wrote it down. Ill get back to you on it.

**Tom Vogel** · 07-16-2013, 09:32 AM

I actually got it all back in without to much cursing, lol.

mtully79 · 07-16-2013, 03:59 PM

BBrendal could you send me your notes? I'll be doing the same thing soon and would also like to avoid the cursing in between steps as much as possible!

**Tom Vogel** · 07-17-2013, 09:39 AM

These links will help...

http://67-72chevytrucks.com/vboard/s...d.php?t=157539

http://67-72chevytrucks.com/vboard/s...d.php?t=178040

http://www.sporttruck.com/techarticl...oor_parts.html

clamcake · 07-17-2013, 04:22 PM

excellent post. thanks for sending it

mtully79 · 07-18-2013, 11:10 AM

That's awesome, much appreciated!

BBrendal · 07-18-2013, 05:06 PM

Quote:

Originally Posted by mtully79

BBrendal could you send me your notes? I'll be doing the same thing soon and would also like to avoid the cursing in between steps as much as possible!

Acording to my notes Tom has the same procedure I do. Plus the links are a great help.

07-05-2013, 10:01 AM	#1
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Blazer door reassembly order Is this the correct door reassembly order? 1.install regulator 2.install door glass 3.install vent window 4.install rear door glass guide 5.slide in rear door glass glide felt (I know there is a small screw in the top, but do you need to use any 3m rubber adhesive to keep it in the channel?) 6.install door glass squeegees

07-05-2013, 03:47 PM	#2
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: Blazer door reassembly order Add some time for cursing in between each of those. __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery

07-05-2013, 05:15 PM	#3
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: Blazer door reassembly order Not sure of this Tom, but you may want to assemble the reg. and window without mounting the bolts for the reg. up. Try it outside the door first, and see how it goes together. For some reason it sticks in my head that thats the way i did it. Somehow i supported the weight of the glass, half way in the door, then offered up the reg. to the bottom of the window glass channel Just dont put your vent window in first, or you will be taking it out like i did to put the window in I built some j hooks for the wipers out of sheet metal, easy to pull up the clips for the wipers Let us know how you made out, and what not to do __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 07-05-2013 at 05:22 PM.

07-16-2013, 01:02 AM	#5
BBrendal Recalculating..... Join Date: Nov 2010 Location: New Lenox Il Posts: 686	Re: Blazer door reassembly order I just did a disasembly and wrote it down. Ill get back to you on it. __________________ Brian - (BBrendal) 1969 Chevy Camaro Z28 1972 Chevy Blazer CST 2004 GMC Yukon (The truck that pulls the car trailer) 1972 Chevy Blazer CST #2 (Finished and sold!) Blazer build link... http://s1213.photobucket.com/albums/...rendal/Blazer/

07-16-2013, 09:32 AM	#6
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: Blazer door reassembly order I actually got it all back in without to much cursing, lol.

07-16-2013, 03:59 PM	#7
mtully79 Registered User Join Date: Apr 2007 Location: Acworth, GA Posts: 441	Re: Blazer door reassembly order BBrendal could you send me your notes? I'll be doing the same thing soon and would also like to avoid the cursing in between steps as much as possible!

07-17-2013, 09:39 AM	#8
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: Blazer door reassembly order These links will help... http://67-72chevytrucks.com/vboard/s...d.php?t=157539 http://67-72chevytrucks.com/vboard/s...d.php?t=178040 http://www.sporttruck.com/techarticl...oor_parts.html

07-17-2013, 04:22 PM	#9
clamcake Registered User Join Date: Jul 2013 Location: Easton, Ma Posts: 39	Re: Blazer door reassembly order excellent post. thanks for sending it

07-18-2013, 11:10 AM	#10
mtully79 Registered User Join Date: Apr 2007 Location: Acworth, GA Posts: 441	Re: Blazer door reassembly order That's awesome, much appreciated!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.