Step Notch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ziegelsteinfaust · 07-08-2013, 09:51 PM

I need a step notch for my 1966 F100 project so I can get the truck down to the proper height. My frame rails are flat or straight depending on how you want to look at it.

Who is a good supplier of these things? I found ones online for $100-$150, but from suppliers I don't know.

Or should I make my own out of 2x4 3/16th walled material.

SCOTI · 07-09-2013, 07:57 AM

Check this site out. They have a step notch that would work well for you & is a little bit of DIY as well...

http://www.welderseries.com/blog/

andrewmp6 · 07-10-2013, 01:57 AM

Or maybe something like this http://www.avsontheweb.com/product.p...cat=482&page=1 or http://www.avsontheweb.com/product.p...cat=482&page=1

wraprail · 07-10-2013, 01:57 PM

Welder Series stuff is top notch. I have used their step notch and it is DLUX.
Posted via Mobile Device

Ziegelsteinfaust · 07-10-2013, 04:34 PM

Thanks guys.

I am likeing the 8 piece kit since I can adjust the notch to my needs

vegadesign · 07-10-2013, 04:38 PM

make your own, thats like less than $30 in materials

07-08-2013, 09:51 PM	#1
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,628	Step Notch I need a step notch for my 1966 F100 project so I can get the truck down to the proper height. My frame rails are flat or straight depending on how you want to look at it. Who is a good supplier of these things? I found ones online for $100-$150, but from suppliers I don't know. Or should I make my own out of 2x4 3/16th walled material.

07-09-2013, 07:57 AM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: Step Notch Check this site out. They have a step notch that would work well for you & is a little bit of DIY as well... http://www.welderseries.com/blog/ __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-10-2013, 01:57 AM	#3
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: Step Notch Or maybe something like this http://www.avsontheweb.com/product.p...cat=482&page=1 or http://www.avsontheweb.com/product.p...cat=482&page=1

07-10-2013, 01:57 PM	#4
wraprail Registered User Join Date: Sep 2010 Location: Lake Havasu City Arizona Posts: 863	Re: Step Notch Welder Series stuff is top notch. I have used their step notch and it is DLUX. Posted via Mobile Device __________________

07-10-2013, 04:34 PM	#5
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,628	Re: Step Notch Thanks guys. I am likeing the 8 piece kit since I can adjust the notch to my needs

07-10-2013, 04:38 PM	#6
vegadesign Registered User Join Date: May 2012 Location: murfreesboro, TN Posts: 743	Re: Step Notch make your own, thats like less than $30 in materials __________________ "its not a hobby, It's a Lifestyle" . bagged and soon to be bodied 70 longbed http://67-72chevytrucks.com/vboard/s...d.php?t=564028



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.