|
07-08-2013, 10:31 PM
|
#1 |
|
Registered User
Join Date: Jun 2012
Location: Columbia, South Carolina
Posts: 59
|
best way to lower
Ok, I'm thinking of lowering my truck 2" in front and 3" or 4" in the back. Do I need to buy dropped spindles or can I just use shorter springs? My truck is a 72 longbed 350/th350 disc in the front drum in the rear. Also coil springs on all 4 corners.
__________________
72 C10 350/TH350 |
|
|
|
07-09-2013, 12:46 AM
|
#2 |
|
Kill Bill...et
Join Date: Aug 2008
Location: Winchestertonfieldville, Wa
Posts: 366
|
Re: best way to lower
Springs will do you just fine, but might not get you the drop you might be expecting due to the inevitable sag from 40 year old springs. Option two (assuming you've got the cash flow) with the spindles would guarantee the 2.5" drop and keep the geometry and super sweet ride we've grown to love with these pickups! Oh, and option three (and best effectiveness per cost ratio) would be to cut a coil off the front springs.
Last edited by stevencvn72; 07-09-2013 at 12:49 AM. Reason: I'm slow and forgot something |
|
|
|
|
07-09-2013, 07:54 AM
|
#3 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: best way to lower
If you like the way it rides, do 2.5" spindles up front. For the rear, I'd go 1" blocks w/some 3" springs.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
07-09-2013, 09:06 PM
|
#4 | |
|
Registered User
Join Date: Jun 2012
Location: Columbia, South Carolina
Posts: 59
|
Re: best way to lower
Quote:
__________________
72 C10 350/TH350 |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
