getting the ball rolling..... again - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slepysal** · 07-18-2013, 09:01 PM

Well after a long time I am finally getting my rear end in my 60 swapped out !
A few years back I rounded up a rear end off of a 67 and stashed it away. I also got an adjustable track bar, lowering springs with hardware, u joint, new axle saddles and u bolts.
I was going thru a ruff patch ( as we all have) and put the truck on the back burner. Easy to do as it was drivable.
I hope to have it back Monday, then I will do the drop spindle disc brake swap.( that I have also had for a while)
The rear end has 5 lug axles so I am not sure what wheels to run, I have some stealies ,older 15" Cragar S/S , Some 15X8 newer style rallies ,100 spoke wires, and some 15 x8 Supremes. I'm leaning towards the Supremes but don't want to run a 235/75r15 white wall. Any suggestions?
Stay tune as I up date this post

'63GENIII · 07-18-2013, 09:37 PM

Hey Sal, got pics of the Supremes? Never seen any so I don't know what they look like
Posted via Mobile Device

**slepysal** · 07-18-2013, 09:50 PM

here you go.....
Name: thCA353BJ9.jpg
Views: 568
Size: 28.5 KB

'63GENIII · 07-18-2013, 09:57 PM

+1 on the Supremes. I've seen em before but didn't know the name. Those are the sheezneezy!
Posted via Mobile Device

gulfcoast66 · 07-18-2013, 10:05 PM

Man Sal ima lean towards the 15-8 Rallies... Are they the 80's Style Rallies?
Posted via Mobile Device

**slepysal** · 07-19-2013, 01:18 AM

yup there 80's style

doobiebro · 07-19-2013, 08:51 AM

Hey Sal the Steelies or Supremes got my vote... What direction you gonna do the Steelies? Color, bullets, center caps, rings or white walls..

1963c-10 · 07-19-2013, 09:36 AM

Those will look sharp on there...cant wait to see some more pics

**slepysal** · 07-19-2013, 11:14 AM

this is what I am running right now, The 5 lug stealies I have are painted a light blue.
Name: IMG_0418.jpg
Views: 494
Size: 55.4 KB

and these are in my garage

gimmy 64 · 07-19-2013, 07:00 PM

Supremes with narrow whitewalls

**slepysal** · 07-23-2013, 12:17 AM

Thanks for the suggestions... I think I'll just try them all on and decide.
Ok so here is an update: I dropped the truck off with all the parts all except the keys !!!
To make maters worse I went out of town and was unable to drop the keys off till today. So I went from front of the line to stand by!
On the plus side I picked up a spilt manifold for it. I have long tube headers on it ( its a 250 6) and they hang REAL low, limiting how low I can drop the front end . I couldn't find a cheap set of shorty headers so the split manifold will have to do.
Hope to have a better update soon.

63burban · 07-23-2013, 11:36 AM

Cragar S/S be different

**slepysal** · 07-23-2013, 08:12 PM

Almost done except for the trac bar. Looks like the bolt on trac bar I got from CPP needs to be tweaked. It's too long so we will cut it down tomorrow and call it good.
Posted via Mobile Device

chevy_mike · 07-24-2013, 10:52 AM

Quote:

Originally Posted by slepysal

Almost done except for the trac bar. Looks like the bolt on trac bar I got from CPP needs to be tweaked. It's too long so we will cut it down tomorrow and call it good.
Posted via Mobile Device

Is the truck on the ground, at ride height? If not, your bar might not be too long. If the truck is up on a lift and the rear suspension is hanging down, this is not how you adjust your track bar. You must be at ride height.

Just giving some info so you don't modify something and find out you didn't need to.

**slepysal** · 07-24-2013, 11:19 AM

Quote:

Originally Posted by chevy_mike

Is the truck on the ground, at ride height? If not, your bar might not be too long. If the truck is up on a lift and the rear suspension is hanging down, this is not how you adjust your track bar. You must be at ride height.

Just giving some info so you don't modify something and find out you didn't need to.

Right on !! Thanks for the tip

**slepysal** · 07-24-2013, 11:59 PM

Update the rear end is in !!! But.............. I couldn't get the rear brakes to bleed. So wheel cylinders, shoes, drums and hardware will be replaced tomorrow. stay tuned..................

**slepysal** · 07-28-2013, 12:12 AM

Update: well looks like my master cylinder is bad. Guess I got do the disc brake swap sooner then latter. The rear end swap came out great, and drives sweet! But since the rear end was a bit wider I ran into a problem.
As I had posted I was debating on what rims to use.... well that changed. Keep in mind my truck is a 1960 fleet side long bed.
The 15x8 Supremes, the 15x8 Cragar S/S ,and the 15x8 80's Rallys are all to wide. So that narrows it down.
I am going to go with the stealies painted red with some Spider caps.But will run my moon caps till I swap out the front drums.
I also had to replace my starter today ,and looks like my Ignition switch decided to sleep with the fishes too.. ah the fun of owning an old truck.
And before I get flamed Pictures are on the way.

**ChiefRocka** · 07-28-2013, 09:09 AM

I was waiting patiently for the "Im ready for the rear-end swap call", but looks like you got it done ...

Awesome !

SIR · 07-28-2013, 01:46 PM

i ran into the same problem on my rear end change...had to cut 1" out of the fender lip to make room....

**slepysal** · 07-28-2013, 03:53 PM

Quote:

Originally Posted by ChiefRocka

I was waiting patiently for the "Im ready for the rear-end swap call", but looks like you got it done ...

Awesome !

Hey John how's it going ? How is the shop doing? Thought you and Rich would be to busy to do it !

Sir were have you been ? hope all is well for you. Thanks for the tip. As it is the 15X8 Supremes hit with no tire on them.

**slepysal** · 07-31-2013, 01:12 AM

Replaced the ignition switch. I found my receipt for my master cylinder and got it replaced under warranty, bench bleed it had the wife help bleed the brakes and took her to dinner for her help. The truck runs great and stops just as good.
I was going to do my disc brakes but I didn't have the outer tie rods so I ordered them up from LMC.
Replacing my old master cylinder was easy and besides the time the only cost was a quart of brake fluid.

geezer#99 · 07-31-2013, 09:06 AM

Hey Sal!! How's it hangin'!!
I liked the color of your truck so much I bought one like it. A few years newer though!
His name's 'Chuck'!

**slepysal** · 07-31-2013, 11:50 AM

Nice looking rig

**slepysal** · 08-03-2013, 12:55 AM

here are some pics

**slepysal** · 08-13-2013, 01:06 PM

Just a corection the rearend came out of a 1970 C10 not a 1967 still 3.73

07-18-2013, 09:01 PM	#1
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	getting the ball rolling..... again Well after a long time I am finally getting my rear end in my 60 swapped out ! A few years back I rounded up a rear end off of a 67 and stashed it away. I also got an adjustable track bar, lowering springs with hardware, u joint, new axle saddles and u bolts. I was going thru a ruff patch ( as we all have) and put the truck on the back burner. Easy to do as it was drivable. I hope to have it back Monday, then I will do the drop spindle disc brake swap.( that I have also had for a while) The rear end has 5 lug axles so I am not sure what wheels to run, I have some stealies ,older 15" Cragar S/S , Some 15X8 newer style rallies ,100 spoke wires, and some 15 x8 Supremes. I'm leaning towards the Supremes but don't want to run a 235/75r15 white wall. Any suggestions? Stay tune as I up date this post __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-18-2013, 09:37 PM	#2
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: getting the ball rolling..... again Hey Sal, got pics of the Supremes? Never seen any so I don't know what they look like Posted via Mobile Device __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

07-18-2013, 09:50 PM	#3
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again here you go..... __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-18-2013, 09:57 PM	#4
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: getting the ball rolling..... again +1 on the Supremes. I've seen em before but didn't know the name. Those are the sheezneezy! Posted via Mobile Device __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

07-18-2013, 10:05 PM	#5
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: getting the ball rolling..... again Man Sal ima lean towards the 15-8 Rallies... Are they the 80's Style Rallies? Posted via Mobile Device __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

07-19-2013, 01:18 AM	#6
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again yup there 80's style __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-19-2013, 08:51 AM	#7
doobiebro Registered User Join Date: Nov 2011 Location: Chaparral NM Posts: 693	Re: getting the ball rolling..... again Hey Sal the Steelies or Supremes got my vote... What direction you gonna do the Steelies? Color, bullets, center caps, rings or white walls.. __________________ CURRENT & PAST CHEVY TRUCKS 60 C-10 Apache short step side 62 C-10 short step side 66 GMC Long bed fleet side 305 V-6 77 C-20 Custom Deluxe (Blue Goose)

07-19-2013, 09:36 AM	#8
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: getting the ball rolling..... again Those will look sharp on there...cant wait to see some more pics __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

07-19-2013, 11:14 AM	#9
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again this is what I am running right now, The 5 lug stealies I have are painted a light blue. and these are in my garage Attached Images __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-19-2013, 07:00 PM	#10
gimmy 64 Registered User Join Date: Sep 2009 Location: menifee california Posts: 788	Re: getting the ball rolling..... again Supremes with narrow whitewalls

07-23-2013, 12:17 AM	#11
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again Thanks for the suggestions... I think I'll just try them all on and decide. Ok so here is an update: I dropped the truck off with all the parts all except the keys !!! To make maters worse I went out of town and was unable to drop the keys off till today. So I went from front of the line to stand by! On the plus side I picked up a spilt manifold for it. I have long tube headers on it ( its a 250 6) and they hang REAL low, limiting how low I can drop the front end . I couldn't find a cheap set of shorty headers so the split manifold will have to do. Hope to have a better update soon. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-23-2013, 11:36 AM	#12
63burban Chevy addict Join Date: May 2012 Location: Iron Ridge, WI Posts: 1,085	Re: getting the ball rolling..... again Cragar S/S be different

07-23-2013, 08:12 PM	#13
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again Almost done except for the trac bar. Looks like the bolt on trac bar I got from CPP needs to be tweaked. It's too long so we will cut it down tomorrow and call it good. Posted via Mobile Device __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by slepysal; 07-23-2013 at 08:26 PM.

07-24-2013, 11:59 PM	#16
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again Update the rear end is in !!! But.............. I couldn't get the rear brakes to bleed. So wheel cylinders, shoes, drums and hardware will be replaced tomorrow. stay tuned.................. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-28-2013, 12:12 AM	#17
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again Update: well looks like my master cylinder is bad. Guess I got do the disc brake swap sooner then latter. The rear end swap came out great, and drives sweet! But since the rear end was a bit wider I ran into a problem. As I had posted I was debating on what rims to use.... well that changed. Keep in mind my truck is a 1960 fleet side long bed. The 15x8 Supremes, the 15x8 Cragar S/S ,and the 15x8 80's Rallys are all to wide. So that narrows it down. I am going to go with the stealies painted red with some Spider caps.But will run my moon caps till I swap out the front drums. I also had to replace my starter today ,and looks like my Ignition switch decided to sleep with the fishes too.. ah the fun of owning an old truck. And before I get flamed Pictures are on the way. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "



Register or Log In To remove these advertisements.

07-28-2013, 09:09 AM	#18
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: getting the ball rolling..... again I was waiting patiently for the "Im ready for the rear-end swap call", but looks like you got it done ... Awesome ! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

07-28-2013, 01:46 PM	#19
SIR SIR Join Date: Apr 2005 Location: grants pass oregon,usa Posts: 658	Re: getting the ball rolling..... again i ran into the same problem on my rear end change...had to cut 1" out of the fender lip to make room.... __________________ 66long low fleet http://community.webshots.com/user/LVNR66

07-31-2013, 01:12 AM	#21
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again Replaced the ignition switch. I found my receipt for my master cylinder and got it replaced under warranty, bench bleed it had the wife help bleed the brakes and took her to dinner for her help. The truck runs great and stops just as good. I was going to do my disc brakes but I didn't have the outer tie rods so I ordered them up from LMC. Replacing my old master cylinder was easy and besides the time the only cost was a quart of brake fluid. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-31-2013, 09:06 AM	#22
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,732	Re: getting the ball rolling..... again Hey Sal!! How's it hangin'!! I liked the color of your truck so much I bought one like it. A few years newer though! His name's 'Chuck'! Attached Images

07-31-2013, 11:50 AM	#23
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again Nice looking rig __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

08-03-2013, 12:55 AM	#24
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again here are some pics __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

08-13-2013, 01:06 PM	#25
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: getting the ball rolling..... again Just a corection the rearend came out of a 1970 C10 not a 1967 still 3.73 __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

Register or Log In To remove these advertisements.