My project (Identifying the Engine) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

eglide78 · 07-19-2013, 11:51 PM

On my 1964 C10. It has an Inline 6 and I am trying to identify it. I find some letters and numbers on the PAD behind the distributor and it looks sort of like:

F0211TCK

I have been unable to successfully cross reference this. I am trying to see if it could possibly be the original Engine.

Any help would be greatly appreciated.

Thanks.

Blue666 · 07-20-2013, 07:23 AM

Read down to post #12. #14 has a wealth of data & other sources.

http://67-72chevytrucks.com/vboard/s...d.php?t=355838

GoodLuck!

eglide78 · 07-20-2013, 08:05 AM

Thanks. I had seen that. Helped with casting number. Definitely a 230/250 1964-1976 but trying to determine if its original. Apparently they didn't start stamping VIN on engine till a few years later. Thanks again.
Posted via Mobile Device

**60-66** · 07-20-2013, 09:46 AM

Normally when you see a 3 letter suffix, that usually started in 1970.2 letter suffix prior. TCK is a 1970 truck 155 HP 250 Six.

eglide78 · 07-20-2013, 10:06 AM

Quote:

Originally Posted by 60-66

Normally when you see a 3 letter suffix, that usually started in 1970.2 letter suffix prior. TCK is a 1970 truck 155 HP 250 Six.

Hah! So obviously not the original power plant. Makes sense 'cause when I went to get a new fuel pump it became an ordeal. Thank you so much for the info... now if I can figure out why it's smoking... compression within 10lbs across all cylinders and doesn't smoke when you first start it so I am hoping it's just valve stem seals... runs so quiet.

Thank you again and Thank you to your "Apache Pilot" for their service. I have one son in Afghanistan for the 3rd tour and one that is a vet. God bless our kids...

**60-66** · 07-20-2013, 10:25 AM

Thank You ! And your two Sons. Our Daughter Christy, now 31, has been in the Army 10 years. This is also her third tour In Afghanistan/Bagdad . Its her first as an Apache pilot. Gotta love these kids for there courage !

eglide78 · 07-20-2013, 10:30 AM

Good deal... My son, 32, is now starting year 15... Iraq twice and now the trifecta in Afghanistan... I had sensed that your pilot was a daughter and that is why I thanked you for "their" service... awesome stuff. It's a good feeling to be proud of our kids as I am sure so many are.

07-20-2013, 07:23 AM	#2
Blue666 Registered User Join Date: Dec 2008 Location: Andrews, NC Posts: 194	Re: My project (Identifying the Engine) Read down to post #12. #14 has a wealth of data & other sources. http://67-72chevytrucks.com/vboard/s...d.php?t=355838 GoodLuck!

07-20-2013, 08:05 AM	#3
eglide78 Registered User Join Date: Jul 2013 Location: Dallas, GA Posts: 30	Re: My project (Identifying the Engine) Thanks. I had seen that. Helped with casting number. Definitely a 230/250 1964-1976 but trying to determine if its original. Apparently they didn't start stamping VIN on engine till a few years later. Thanks again. Posted via Mobile Device

07-20-2013, 09:46 AM	#4
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: My project (Identifying the Engine) Normally when you see a 3 letter suffix, that usually started in 1970.2 letter suffix prior. TCK is a 1970 truck 155 HP 250 Six. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

07-20-2013, 10:25 AM	#6
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: My project (Identifying the Engine) Thank You ! And your two Sons. Our Daughter Christy, now 31, has been in the Army 10 years. This is also her third tour In Afghanistan/Bagdad . Its her first as an Apache pilot. Gotta love these kids for there courage ! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

07-20-2013, 10:30 AM	#7
eglide78 Registered User Join Date: Jul 2013 Location: Dallas, GA Posts: 30	Re: My project (Identifying the Engine) Good deal... My son, 32, is now starting year 15... Iraq twice and now the trifecta in Afghanistan... I had sensed that your pilot was a daughter and that is why I thanked you for "their" service... awesome stuff. It's a good feeling to be proud of our kids as I am sure so many are.

07-19-2013, 11:51 PM	#1
eglide78 Registered User Join Date: Jul 2013 Location: Dallas, GA Posts: 30	My project (Identifying the Engine) On my 1964 C10. It has an Inline 6 and I am trying to identify it. I find some letters and numbers on the PAD behind the distributor and it looks sort of like: F0211TCK I have been unable to successfully cross reference this. I am trying to see if it could possibly be the original Engine. Any help would be greatly appreciated. Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.