|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-21-2013, 11:05 AM
|
#1 |
|
Registered User
Join Date: Jul 2007
Location: branchburg, new jersey
Posts: 568
|
1966 c-20 tracking arm bushings
has anybody replaced there tracking arm bushings on a 3/4 ton truck? i got my 3/4 ton bushings from lmc truck, i got the old ones out with the drill bit method , how do you get the new ones in? with a press? the lmc bushings are .020 oversized than the tracking arm holes. it doesn't seem like there gonna press in with that much oversize. any one replace theirs yet? thanks
Last edited by gmcdeadhead; 07-21-2013 at 11:08 AM. Reason: missed spelled word |
|
|
|
07-21-2013, 01:27 PM
|
#2 |
|
Registered User
Join Date: Aug 2011
Location: Patterson California
Posts: 1,133
|
Re: 1966 c-20 tracking arm bushings
I replaced mine, I used a torch to burn them out, then I used wd40 to put the new ones back in.
__________________
MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ |
|
|
|
|
07-21-2013, 02:00 PM
|
#3 |
|
Registered User
Join Date: Jul 2007
Location: branchburg, new jersey
Posts: 568
|
Re: 1966 c-20 tracking arm bushings
i got mine out no problem . but putting them in , there to tight . i ruined one already. there .020 oversized. i might have to get the tracking arm reamed out a little. nice how a 1 hour job takes 2 days to complete.
Last edited by gmcdeadhead; 07-21-2013 at 02:01 PM. Reason: misspelled word |
|
|
|
|
07-21-2013, 05:49 PM
|
#4 |
|
Registered User
Join Date: May 2013
Location: Scottsdale, Az
Posts: 245
|
Re: 1966 c-20 tracking arm bushings
"nice how a 1 hour job takes 2 days to complete." this how felt on alot my jobs on my truck to
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
