p/s pump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lil Greg · 07-02-2003, 11:06 PM

This is my first time posting on this part of the board but i thought yall could steer me in the right direction, ok i'm putting a 68 big block in my 75 truck and need a p/s pump and the brackets can i use ones from a 67-72 truck and if so are they for short or long water pump and where can i order them...........thanks

da-burb · 07-02-2003, 11:55 PM

up to 72 turcks would have had short water pumps. 1973 and up are long water pumps. You will want to find the long set up for your 75. They are much cheaper and easier to find. i think somebody here was asking 75 for the longs and 225 for the short set up a while back.

beau396 · 07-03-2003, 12:42 AM

I put a bbc in my '67 and went with the swp setup. It would have been a lot easier, and cheaper to go with lwp stuff instead. However you can get most of the stuff in reproduction parts from vendors such as year one, just look for '65-'67 chevelle bbc parts. Still by the time it is all said and done you will have at least double, but more likely triple the amount of money tied up in it. however if you still want to go swp I can point you in the right direction as far as finding parts just drop me a pm.

Daves72'GMC · 07-05-2003, 09:25 AM

where can I get a BB ps pump pulley? Mines a little warped. Thanks

07-02-2003, 11:06 PM	#1
Lil Greg Registered User Join Date: Feb 2003 Location: Mansfield,Tx Posts: 54	p/s pump This is my first time posting on this part of the board but i thought yall could steer me in the right direction, ok i'm putting a 68 big block in my 75 truck and need a p/s pump and the brackets can i use ones from a 67-72 truck and if so are they for short or long water pump and where can i order them...........thanks

07-02-2003, 11:55 PM	#2
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	up to 72 turcks would have had short water pumps. 1973 and up are long water pumps. You will want to find the long set up for your 75. They are much cheaper and easier to find. i think somebody here was asking 75 for the longs and 225 for the short set up a while back. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

07-03-2003, 12:42 AM	#3
beau396 Registered User Join Date: Nov 2002 Location: oak harbor wa Posts: 61	I put a bbc in my '67 and went with the swp setup. It would have been a lot easier, and cheaper to go with lwp stuff instead. However you can get most of the stuff in reproduction parts from vendors such as year one, just look for '65-'67 chevelle bbc parts. Still by the time it is all said and done you will have at least double, but more likely triple the amount of money tied up in it. however if you still want to go swp I can point you in the right direction as far as finding parts just drop me a pm. __________________ '67 C10 short box fleet side wood bed small rear window frame off restoration. 396BB,Th400, ps, pwr disc 5 lug, posi 3.07, 2000 Suburban 60/40 pwr seats, 2.5" front drop 4" rear, powder coated running gear.

07-05-2003, 09:25 AM	#4
Daves72'GMC Registered User Join Date: Mar 2003 Location: Asheville, N.C Posts: 952	where can I get a BB ps pump pulley? Mines a little warped. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.