Pass Side Motor Mount For A 292 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

junk4cash · 08-02-2013, 11:18 PM

Swapping the tired old 230 out of my 66 for a fresh 292. Almost ready to put it in the truck but realized the pass side motor mount won't line up. Can I use my stock 230 mount with spacers? or do I need an entire different mount? Thank you for any info and if I need one, does anyone have one?

**Captainfab** · 08-02-2013, 11:42 PM

You will need the shorter motor mount bracket for the passenger side. I should have an extra one. I'd like $20.00 plus shipping.

junk4cash · 08-03-2013, 12:07 AM

Are you sure it's a shorter mount? By looking at it, my 230 mount was TOO short to fit the holes in the block.

**Captainfab** · 08-03-2013, 12:14 AM

I was referring to the bracket that bolts to the frame and the crossmember. That is different for the 292 versus the 230/250. I do not have any of the brackets between the motor mount and the block.

08-02-2013, 11:18 PM	#1
junk4cash Registered User Join Date: Dec 2011 Location: Kansas City, Mo Posts: 160	Pass Side Motor Mount For A 292 Swapping the tired old 230 out of my 66 for a fresh 292. Almost ready to put it in the truck but realized the pass side motor mount won't line up. Can I use my stock 230 mount with spacers? or do I need an entire different mount? Thank you for any info and if I need one, does anyone have one?

08-02-2013, 11:42 PM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Pass Side Motor Mount For A 292 You will need the shorter motor mount bracket for the passenger side. I should have an extra one. I'd like $20.00 plus shipping. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-03-2013, 12:07 AM	#3
junk4cash Registered User Join Date: Dec 2011 Location: Kansas City, Mo Posts: 160	Re: Pass Side Motor Mount For A 292 Are you sure it's a shorter mount? By looking at it, my 230 mount was TOO short to fit the holes in the block.

08-03-2013, 12:14 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Pass Side Motor Mount For A 292 I was referring to the bracket that bolts to the frame and the crossmember. That is different for the 292 versus the 230/250. I do not have any of the brackets between the motor mount and the block. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.