NJ toolbox door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**6t727t2** · 08-06-2013, 11:08 AM

Full description, no rot, no rust through not even a pinhole, seams all the way around are tight, hinges should be useable......but it does have issues. Looks like someone kicked it from the outside, not creased but pushed in on both sides. I took some before and after pictures after sanding with a long board to try to show the depressions. Also the latch rod is pulled out of one side. No lock key. If the dents can be pulled out, this could be a nice door? Look over the pictures and see if it's what you want. $175 shipped, pp or m.o.

**6t727t2** · 08-06-2013, 11:15 AM

Will be posting a lot of pictures of this door.

**6t727t2** · 08-06-2013, 11:35 AM

more pics

nobolt · 08-06-2013, 11:47 AM

great deal Harry. I should jump on it but will leave it for someone that can put it to use.

**6t727t2** · 08-06-2013, 01:03 PM

Yes, Dave, I think someone with bodywork skills could make this almost new.

nobolt · 08-08-2013, 04:25 AM

good morning Harry,
I found a few extra dollars in my paypal account. how about $210 for the door and trim you have on your other post?
thanks

**6t727t2** · 08-08-2013, 07:06 PM

Dave, that works for me, lets call it 200 even, I can ship them together. pm sent

08-06-2013, 11:08 AM	#1
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,470	toolbox door Full description, no rot, no rust through not even a pinhole, seams all the way around are tight, hinges should be useable......but it does have issues. Looks like someone kicked it from the outside, not creased but pushed in on both sides. I took some before and after pictures after sanding with a long board to try to show the depressions. Also the latch rod is pulled out of one side. No lock key. If the dents can be pulled out, this could be a nice door? Look over the pictures and see if it's what you want. $175 shipped, pp or m.o. Attached Images

08-06-2013, 11:15 AM	#2
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,470	Re: toolbox door Will be posting a lot of pictures of this door. Attached Images

08-06-2013, 11:35 AM	#3
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,470	Re: toolbox door more pics Attached Images

08-06-2013, 11:47 AM	#4
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: toolbox door great deal Harry. I should jump on it but will leave it for someone that can put it to use. __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

08-06-2013, 01:03 PM	#5
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,470	Re: toolbox door Yes, Dave, I think someone with bodywork skills could make this almost new. Attached Images

08-08-2013, 04:25 AM	#6
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: toolbox door good morning Harry, I found a few extra dollars in my paypal account. how about $210 for the door and trim you have on your other post? thanks __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

08-08-2013, 07:06 PM	#7
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,470	Re: toolbox door Dave, that works for me, lets call it 200 even, I can ship them together. pm sent



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.