|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-12-2013, 01:23 PM
|
#1 |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
My build at 15 years old
Hi everyone my name is Joe and I am 15 years old. I love working on anything with a motor and had always wanted a 67-72 Chevy from the time i was very young. This past memorial day my dad and I picked up our project. The owner had bought the truck about 8 years ago in Arizona (we live in Michigan) and drove it for a few years and then he decided to start a restoration. He took the cab, bed and front clip off the frame and stopped because of numerous surgeries and it was too hard for him to work anymore. The truck was a 1969 C20 longbed with a 350 engine and 400 trans with factory air, powersteering, and powerbrakes. The truck had very little rust on the rockers and cab corners but that was the only rust on the whole truck. He had wanted to make a shortbed truck when he was going to restore it so he bought a 1968 c10 swb frame and bed from Oklahoma. I only wanted a shortbed truck so this made the deal. I bought the truck with my grass money and the project began. Our plan was to build a swb truck lowered a few inches with a fuel injected 5.3 or 6.0 vortec with an electronically controlled trans. This will be my daily driver once I turn 16. Here are some pictures of when we brought the truck home in pieces.
      
|
|
|
|
08-12-2013, 01:39 PM
|
#2 |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
The first weekend we started on the rockers and cab corners and actually got them done that weekend.
     
|
|
|
|
|
08-12-2013, 01:42 PM
|
#3 |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
Pulled the old 350 out of the longbed frame.
 My dad had a friend sandblast the shortbed frame.  
|
|
|
|
|
08-12-2013, 01:48 PM
|
#4 |
|
Proprietor of Dale's Corner
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,271
|
Re: My build at 15 years old
Welcome to the site, good luck and have fun with your project. Keep posting pics
Posted via Mobile Device
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul |
|
|
|
|
08-12-2013, 01:51 PM
|
#5 |
|
Registered User
Join Date: May 2013
Location: Central NC
Posts: 830
|
Re: My build at 15 years old
Looks like an awsome Father/Son build with a great foundation.
Congrats! I have to ask, is that grass $$ from cutting or selling? Posted via Mobile Device
__________________
1972 Cheyene C-10 "Ole Green" My Grandfathers truck (early 70's to 1983) My first vehicle (1983) Original 350 (3 rebuilds) 700R4 from Bowtie Overdrives 
|
|
|
|
|
08-12-2013, 01:51 PM
|
#6 |
|
Registered User
 
Join Date: Apr 2013
Location: Gainesville, TEXAS
Posts: 658
|
Re: My build at 15 years old
Welcome to our addiction,
Sounds like you have a project to get in the middle of. With what your describing your building a truck out of two. So my main suggestion is go find out your state laws now about how to legally do your truck. I figure your taking the cab from the long bed and installing it on the SB frame. It's doable, just make sure before you spend to many hours and to much money on it, that when it is ready to go it is legal in the eyes of the state. Keep receipts, titles, from the sale of the truck and frame, and all other major components. When it comes time to get it checked out you have a paper trail that supports your situation. Been there done that, and had to redo enough to make it legally correct. Good luck |
|
|
|
|
08-12-2013, 01:52 PM
|
#7 | |
|
RAT1968 '68 Cab/'71 Parts
Join Date: Feb 2002
Location: Coarsegold, CA
Posts: 2,375
|
Re: My build at 15 years old
Quote:
Yeah, the truck and shortie frame are great. But to be able to work on this project with your dad? I'm just wishin' I would'a had that sort of thing going with my scotch-gulpin' padre. Makes my heart soar to see that you do with yours....Also, to have a squared away young person interested in this ride gives me way more hope than before I read your posts. Thanks for that from an Old Guy. 
__________________
M17 Coarsegold, CA RAT's shiny now. But always a rat. |
|
|
|
|
|
08-12-2013, 01:56 PM
|
#8 |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
Next we started stripping down the frame completely and then we painted it with POR 15. This paint is awesome!
    We mounted a 16 gallon tank for fuel injection in the rear frame.   We assembled the front end with all new parts and 2.5 inch drop spindles the stock height springs. Started running some brake line too.  
|
|
|
|
|
08-12-2013, 01:59 PM
|
#9 | |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
Quote:
|
|
|
|
|
|
08-12-2013, 02:01 PM
|
#10 |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
The grass money is from cutting!! haha
|
|
|
|
|
08-12-2013, 02:15 PM
|
#11 |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
Next we installed a 3.73 richmond gear and an eaton locker in the 12 bolt rear end.
 All the work on the frame was done. Next we set the cab on the frame.   We bought a 6.0 vortec engine and 4l80e trans from justchevytrucks.com in Maine and had it shipped here. We painted the firewall black and dropped in the motor and trans.  
|
|
|
|
|
08-12-2013, 02:22 PM
|
#12 |
|
Formerly- 1972SuperCheyenne
Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
|
Re: My build at 15 years old
Love the build and the direction its going. Did you have clearance issues putting the steering box on the chassis? You shouldn't need those spacers between the box and chassis. Look forward to following this one.
__________________
--Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. |
|
|
|
|
08-12-2013, 02:27 PM
|
#13 | |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
Quote:
|
|
|
|
|
|
08-12-2013, 02:32 PM
|
#14 |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
We started getting the cab, doors, and fenders ready for paint next.
  Off to the paint shop   
|
|
|
|
|
08-12-2013, 02:44 PM
|
#15 |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
I went with GM Victory red for the color. The paint turned out great and was done by a body shop just down the road from my house.
  I got Hedman LS swap mid length coated headers. They did not just bolt up. We had to trim the frame.   Mounted the doors.  Mounted the inner fenders and core support.  
|
|
|
|
|
08-12-2013, 02:52 PM
|
#16 |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
We started building a 2.5 inch dual stainless exhaust with dual Magnaflow mufflers.
This is the crossover right before the transmission crossmember. The pipes go over the crossmember.  The pipes then go through the next crossmember into the mufflers.  
Last edited by 1969shortbed6.0; 08-12-2013 at 03:12 PM. |
|
|
|
|
08-12-2013, 02:53 PM
|
#17 |
|
Senior Member
 
Join Date: Jan 2011
Location: Chattanooga TN
Posts: 6,216
|
Re: My build at 15 years old
Looking really good! Keep at it
__________________
Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 *Currently underway* 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet *Sold* 1985 Silverado Short Fleet *Sold* 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride) |
|
|
|
|
08-12-2013, 02:55 PM
|
#18 |
|
Registered User
Join Date: Jun 2010
Location: Upland Ca
Posts: 4,148
|
Re: My build at 15 years old
Killer ride!
__________________
1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703 |
|
|
|
|
08-12-2013, 03:06 PM
|
#19 |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
The fenders are mounted.
  Grilles mounted.  This is how the truck currently sits. This is what we have gotten done in just over 2 months. We have done everything except the paint and sandblasting. I am having a bunch of fun but I can't wait to get behind the wheel! It is lowered 2.5 inches in the front and 3 inches in the back. I am planning on running a 17 or 18 inch wheel. The interior will be all original. The motor is a 6.0 LQ4 with a 4l80e trans. Our plan is to have the truck on the road before the snow flies. More pictures to come!! 
|
|
|
|
|
08-12-2013, 03:38 PM
|
#20 |
|
Registered User
Join Date: Sep 2012
Location: Factory
Posts: 682
|
Re: My build at 15 years old
I'm jealous!
|
|
|
|
|
08-12-2013, 04:18 PM
|
#21 |
|
Registered User
Join Date: Apr 2009
Location: SS, MD
Posts: 62
|
Re: My build at 15 years old
amazing work! that truck will keep the smile on your face for years to come!
looks like you've got quite the dad too! kudos to you both!
__________________
Current: 1971 K10 lwb Past: 1972 c10 lwb 1969 c10 swb 1977 c10 lwb more old jeeps than I want to remember! |
|
|
|
|
08-12-2013, 05:02 PM
|
#22 |
|
Registered User
Join Date: May 2013
Location: Central NC
Posts: 830
|
Re: My build at 15 years old
Now thats some progress...bare frame at 1:23 pm, back from paint at 3:06 pm!
__________________
1972 Cheyene C-10 "Ole Green" My Grandfathers truck (early 70's to 1983) My first vehicle (1983) Original 350 (3 rebuilds) 700R4 from Bowtie Overdrives
|
|
|
|
|
08-12-2013, 05:07 PM
|
#23 | |
|
Registered User
Join Date: Jun 2013
Location: Lake Orion, Mi
Posts: 39
|
Re: My build at 15 years old
Quote:
Thank you everyone for the compliments!! 
|
|
|
|
|
|
08-12-2013, 05:20 PM
|
#24 |
|
Proprietor of Dale's Corner
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,271
|
Re: My build at 15 years old
Things go quick when you have "grass" money
 Posted via Mobile Device Posted via Mobile Device
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul |
|
|
|
|
08-12-2013, 06:00 PM
|
#25 |
|
Project 7dos
Join Date: Aug 2001
Location: Abilene, Texas
Posts: 876
|
Re: My build at 15 years old
Wow! Reminds me alot of my dad and my build (truck in sig and pic to the left.)
It was an awesome experience, and made my father and me even closer. It's something I'll always look back on and cherish with great pride and gratitude. I'll never give it up, and will pass it down to my sons.
__________________
7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
