Dropped '86 LWB....(QUESTION) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kaotik Kustumz · 08-21-2013, 01:08 AM

Hey guys i was wondering if somebody could tell me just how much it will lower my truck if I pull coil springs in the front and chop off 1 full coil and put on some 2 1/2" drop spindles, and then run a flip kit in the rear....

I was told it would be bout a 4" front drop and a 6" rear drop....

2 1/2" drop spindles and 1 full coil cut off in front = 4"
Rear flip kit (NO C-NOTCH and NO BUMP STOPS) = 6"

Posted via Mobile Device

bigwheel15 · 08-21-2013, 02:31 AM

A full coil cut is good for about 2" of drop, so combined with the drop spindles you'd be at approximately 4 1/2" up front. And depending on how many leaves are in your rear leaf packs you would see between 5"-6".
Posted via Mobile Device

Kaotik Kustumz · 08-21-2013, 07:50 PM

Quote:

Originally Posted by bigwheel15

A full coil cut is good for about 2" of drop, so combined with the drop spindles you'd be at approximately 4 1/2" up front. And depending on how many leaves are in your rear leaf packs you would see between 5"-6".
Posted via Mobile Device

Sweet thanx bro

Posted via Mobile Device

KQQL IT · 08-21-2013, 11:55 PM

Remove the bump stop bracket on the rear of frame.
Posted via Mobile Device

08-21-2013, 01:08 AM	#1
Kaotik Kustumz Registered User Join Date: Jun 2013 Location: Snyder,Texas Posts: 96	Dropped '86 LWB....(QUESTION) Hey guys i was wondering if somebody could tell me just how much it will lower my truck if I pull coil springs in the front and chop off 1 full coil and put on some 2 1/2" drop spindles, and then run a flip kit in the rear.... I was told it would be bout a 4" front drop and a 6" rear drop.... 2 1/2" drop spindles and 1 full coil cut off in front = 4" Rear flip kit (NO C-NOTCH and NO BUMP STOPS) = 6" Posted via Mobile Device __________________ KAOTIK Kustumz 1984 Chevy 1 Ton Crew Cab Dually "Western Hauler"454, th400, (6.0, 4l80e Swap Coming Soon)(5/7 Drop Coming Soon) (ON HOLD FOR NOW) 1986 Chevy 1/2 Ton LWB Silverado350, 700r4, (5.3, 4l60e Swap Coming Soon)(4/6 Drop)

08-21-2013, 02:31 AM	#2
bigwheel15 Registered User Join Date: Feb 2010 Location: Fort Worth, TX Posts: 727	Re: Dropped '86 LWB....(QUESTION) A full coil cut is good for about 2" of drop, so combined with the drop spindles you'd be at approximately 4 1/2" up front. And depending on how many leaves are in your rear leaf packs you would see between 5"-6". Posted via Mobile Device

08-21-2013, 11:55 PM	#4
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,256	Re: Dropped '86 LWB....(QUESTION) Remove the bump stop bracket on the rear of frame. Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.