The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-22-2013, 11:43 AM   #1
charlieatthedisco
Registered User
 
Join Date: Jul 2013
Location: Santa Rosa, Ca
Posts: 42
Crate engine for 78 350 CA truck?

Tried doing a search for this because I'm sure it has already been mentioned but the search always fails on me. I was thinking throwing in a crate engine in a 78 c10 which already has a 350 but is tired and needs a rebuild. I'd rather start fresh. What engine do you recommend and from where? also would I be able to add all of the smog components to it that I have on the current 350? It is a CA truck and must be smogged. I'm not looking for major HP gains here just a driver
charlieatthedisco is offline   Reply With Quote
Old 08-22-2013, 12:30 PM   #2
lowesguy
Registered User
 
lowesguy's Avatar
 
Join Date: May 2012
Location: Temecula Ca
Posts: 115
Re: Crate engine for 78 350 CA truck?

The smog law is unforgiving here,either rebuild,replace or know somebody! a crate engine will be a gamble! wouldn't you be pissed if you did all that work and the tech fails it for not original engine? wish mine was exempt,its a 78 to,cant even do headers from my research. I did gut the cat thou!Bahahaha
__________________
Thanks John!
lowesguy is offline   Reply With Quote
Old 08-22-2013, 12:31 PM   #3
charlieatthedisco
Registered User
 
Join Date: Jul 2013
Location: Santa Rosa, Ca
Posts: 42
Re: Crate engine for 78 350 CA truck?

Quote:
Originally Posted by lowesguy View Post
The smog law is unforgiving here,either rebuild,replace or know somebody! a crate engine will be a gamble! wouldn't you be pissed if you did all that work and the tech fails it for not original engine? wish mine was exempt,its a 78 to,cant even do headers from my research. I did gut the cat thou!Bahahaha
Haha I'm going to have to bet on the "know somebody" trick. Or who knows maybe this coming year they will extend the smog except to 1980! Or maybe i'm just dreaming haha
charlieatthedisco is offline   Reply With Quote
Old 08-22-2013, 12:35 PM   #4
nheller76
Registered User
 
nheller76's Avatar
 
Join Date: Sep 2012
Location: salem oregon
Posts: 281
Re: Crate engine for 78 350 CA truck?

So maybe this is a different way to go but if your not looking for HP then I would suggest getting a rebuilt one from CL or an engine shop. It will be cheaper and u could save money for things like a carb rebuild or some shiny parts. If u get a rebuilt block, rotating assembly and heads u can transfer everything from your old motor. Just a very simple swap, plus u would be able to see how everything goes on the new motor. Just saying crate motors aren't all they are put up to be and a good shop rebuild would work better for what your after.
Posted via Mobile Device
__________________
Faith and Patience with my truck, that is what i pray for every day!

See my build http://67-72chevytrucks.com/vboard/s...d.php?t=580013
nheller76 is offline   Reply With Quote
Old 08-22-2013, 12:37 PM   #5
charlieatthedisco
Registered User
 
Join Date: Jul 2013
Location: Santa Rosa, Ca
Posts: 42
Re: Crate engine for 78 350 CA truck?

Quote:
Originally Posted by nheller76 View Post
So maybe this is a different way to go but if your not looking for HP then I would suggest getting a rebuilt one from CL or an engine shop. It will be cheaper and u could save money for things like a carb rebuild or some shiny parts. If u get a rebuilt block, rotating assembly and heads u can transfer everything from your old motor. Just a very simple swap, plus u would be able to see how everything goes on the new motor. Just saying crate motors aren't all they are put up to be and a good shop rebuild would work better for what your after.
Posted via Mobile Device
Thats not a bad call. I'm gonna call around and see what people have around here.
charlieatthedisco is offline   Reply With Quote
Old 08-22-2013, 12:45 PM   #6
lowesguy
Registered User
 
lowesguy's Avatar
 
Join Date: May 2012
Location: Temecula Ca
Posts: 115
Re: Crate engine for 78 350 CA truck?

18 years ago my 350 was fouling plugs and ran like crap,I did a compression test and came out good,so I just pulled the heads and had them rebuilt,trucks still runs good and pass's smog! my bottom end is still original 1978!
__________________
Thanks John!
lowesguy is offline   Reply With Quote
Old 08-22-2013, 12:47 PM   #7
nheller76
Registered User
 
nheller76's Avatar
 
Join Date: Sep 2012
Location: salem oregon
Posts: 281
Re: Crate engine for 78 350 CA truck?

Quote:
Originally Posted by charlieatthedisco View Post
Thats not a bad call. I'm gonna call around and see what people have around here.
I might be wrong I don't live in CA but it might be worth getting your motor redone too.
Posted via Mobile Device
__________________
Faith and Patience with my truck, that is what i pray for every day!

See my build http://67-72chevytrucks.com/vboard/s...d.php?t=580013
nheller76 is offline   Reply With Quote
Old 08-22-2013, 12:47 PM   #8
charlieatthedisco
Registered User
 
Join Date: Jul 2013
Location: Santa Rosa, Ca
Posts: 42
Re: Crate engine for 78 350 CA truck?

Quote:
Originally Posted by lowesguy View Post
18 years ago my 350 was fouling plugs and ran like crap,I did a compression test and came out good,so I just pulled the heads and had them rebuilt,trucks still runs good and pass's smog! my bottom end is still original 1978!
I'm extremely worried about my lower end, the whole reason wh this started is because I flushed the cooling system and when I fired her back up all the freeze plugs started to leak, one after another. When I pulled the plugs I could stick my finger in there and pull out endless black gunk like someone had put bottles of leak seal crap in it
charlieatthedisco is offline   Reply With Quote
Old 08-22-2013, 12:49 PM   #9
charlieatthedisco
Registered User
 
Join Date: Jul 2013
Location: Santa Rosa, Ca
Posts: 42
Re: Crate engine for 78 350 CA truck?

Quote:
Originally Posted by nheller76 View Post
I might be wrong I don't live in CA but it might be worth getting your motor redone too.
Posted via Mobile Device
Well I started calling around and the medium price here for a rebuild is in the 2k range and thats labor to clean and machine the parts. I think I might hold out for CL rebuild like you suggested
charlieatthedisco is offline   Reply With Quote
Old 08-22-2013, 02:43 PM   #10
nheller76
Registered User
 
nheller76's Avatar
 
Join Date: Sep 2012
Location: salem oregon
Posts: 281
Re: Crate engine for 78 350 CA truck?

Wow CA is expensive!
Posted via Mobile Device
__________________
Faith and Patience with my truck, that is what i pray for every day!

See my build http://67-72chevytrucks.com/vboard/s...d.php?t=580013
nheller76 is offline   Reply With Quote
Old 08-22-2013, 03:40 PM   #11
Tx Firefighter
Watch out for your cornhole !
 
Tx Firefighter's Avatar
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
Re: Crate engine for 78 350 CA truck?

No sense in replacing an engine due to rusty core plugs.

Replace all core plugs and flush the cooling system to get it clean. That's a 50 dollar job, including antifreeze.
Posted via Mobile Device
Tx Firefighter is offline   Reply With Quote
Old 08-22-2013, 04:25 PM   #12
Skunksmash
Registered User
 
Skunksmash's Avatar
 
Join Date: Sep 2012
Location: TX
Posts: 1,014
Re: Crate engine for 78 350 CA truck?

Quote:
Originally Posted by lowesguy View Post
Wouldn't you be pissed if you did all that work and the tech fails it for not original engine?
Are you allowed to upgrade to an engine that produces even lower emissions? Seems like if they're so concerned about pollution, then they'd be all for doing that. If so, 5.3LS upgrade.
Skunksmash is offline   Reply With Quote
Old 08-22-2013, 05:09 PM   #13
Tx Firefighter
Watch out for your cornhole !
 
Tx Firefighter's Avatar
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
Re: Crate engine for 78 350 CA truck?

Some of this California Nazi talk doesn't make sense.

Riddle me this.....

A new truck throws a rod through the block and ruins it. Under warranty, the GM dealership tech walks into the parts department and rolls a crate engine out to the service bay and installs it. You're telling me that now, since the block doesn't carry the original engine serial number its not legal ?
Posted via Mobile Device
Tx Firefighter is offline   Reply With Quote
Old 08-22-2013, 11:38 PM   #14
Skunksmash
Registered User
 
Skunksmash's Avatar
 
Join Date: Sep 2012
Location: TX
Posts: 1,014
Re: Crate engine for 78 350 CA truck?

I was always under the impression that all it had to do, was pass factory emissions for that engine, that year. That's why I asked "What if you actually improved things"?

I can't understand why they would be opposed to a less polluting engine going into a vehicle. But who knows. Never count on the Government when you want good sense.
Skunksmash is offline   Reply With Quote
Old 08-23-2013, 01:41 AM   #15
KrazyRay
Registered User
 
KrazyRay's Avatar
 
Join Date: Jun 2009
Location: Oroville, CA
Posts: 4,827
Re: Crate engine for 78 350 CA truck?

It looks like CA is starting a program to check engine date codes and make you smog it to the standards of the newer engine. My buddy has a newer Vortec in his 86 K10 and it failed smog with all of his 86 emissions attahed to the Vortec. It now must meet 1996 emmisions.
KrazyRay is offline   Reply With Quote
Old 08-23-2013, 11:30 AM   #16
rfmaster
Registered User
 
rfmaster's Avatar
 
Join Date: Oct 2003
Location: OC CA
Posts: 1,374
Re: Crate engine for 78 350 CA truck?

To original poster (OP)

Pull your engine out.
Have a competent machine shop go through rotating assembly.
Crank may need to be turned down if bearing surfaces are out of spec. Have block checked, bored, and squared if needed. Align hone if mains showing signs.
For 78 source new flex plate and balancer - there is no point of re-using them.
Have rods checked, new rods with performance bolts are about $130. In most cases it is not worth re-working stock rods with new bolts.
For a stock or RV style rebuild use Sealed Power H345 pistons. Cheap and will take reasonable amount of abuse.
If budget permits have machine shop balance rotating assembly - in the end you'll have smoother running engine.
In 4.030 block and 9.025 deck height with 0.038 thick head gasket with 74cc heads the resulting CR will be 8.7:1 which is fine for 87 octane E10 crap we have for gas in CA.
Have heads checked and reworked, valve job - at a minimum new exhaust valves are a must!
Get a stock or RV style camshaft that has EO number - for example SpeedPro CS-1014R or CS-1105R Emissions Legal Cam; CARB E.O. No. D-292-1; Pro-2000 Perf. Cam with matching HT817 lifters.
Use SAE 30W oil with zinc additive during break-in -absolute must for a flat tappet engine.

Make sure that you retain all smog devices - EFE valve is commonly damaged during pull, TVS screwed into intake manifold tend to break apart from years in service. Take plenty of photos, label everything, draw a system diagram how everything is connected before turning a wrench.

Clean everything - make sure that all gasket surfaces are flat and gasket residue has been removed. I keep a note book for each projects keep it organized. There is no other way for smog infested engine bays of the 70 and early 80's.

Most important - take your time to make it right.

//RF
__________________
"The Beast"

1975 Chevrolet C20 longbed
350/700R4! with 3inch body lift
Dual Flowmasters Super 40's!
TBI retrofit completed (2007-07-29)
New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)
rfmaster is offline   Reply With Quote
Old 08-23-2013, 02:57 PM   #17
Malo83
Cruzzzn' Vet
 
Malo83's Avatar
 
Join Date: Jan 2005
Location: Porterville,Ca.
Posts: 1,918
Re: Crate engine for 78 350 CA truck?

Save your pennies and go the E Rod 5.3 route, a little pricey but this looks like the wave of the future for Cali Cruzzers
http://www.chevyhardcore.com/news/gm...smog-legality/
Malo83 is offline   Reply With Quote
Old 08-23-2013, 03:45 PM   #18
rfmaster
Registered User
 
rfmaster's Avatar
 
Join Date: Oct 2003
Location: OC CA
Posts: 1,374
Re: Crate engine for 78 350 CA truck?

Malo

In order for him to run 5.3 in 78 truck he will have to install all of the smog equipment from 5.3L donor and smog it as if it was a donor truck (2002 for example). Instead of $2k rebuild job this will turn into $7k transformation exercise of a $2500 truck. So as you can see it not a practical for some who do not have deep pockets...

The E-ROD engine system comes in either manual or automatic configurations and has all required emission equipment, including a properly calibrated engine control module, an evaporative emission canister, and catalytic converters (and what about VSS?). The 5.3L is the second E-ROD engine to be cleared for use in California.

While more emission components come with the E-ROD systems in order to pass California regulations, they still have plenty of power to push. The 5.3L is rated at 326 HP at 5,300 RPM and 350 pound-feet of torque at 4,400 RPM. While the price is a bit steep at $7,125, it may be well worth it to have a legal performance engine for your California-registered car, and you’re getting a complete turn-key engine package. Anyone who’s spent a small fortune trying to get all the bits and pieces necessary for a junkyard swap will appreciate not having to repeat that experience.
__________________
"The Beast"

1975 Chevrolet C20 longbed
350/700R4! with 3inch body lift
Dual Flowmasters Super 40's!
TBI retrofit completed (2007-07-29)
New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)
rfmaster is offline   Reply With Quote
Old 08-23-2013, 07:44 PM   #19
Dead Parrot
Registered User
 
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,611
Re: Crate engine for 78 350 CA truck?

Go to a GM dealer and ask about what crate motors they have for your truck. Be sure to express your concern about the emissions issue. Have a buddy or two in tow as well as witnesses. They should be willing to certify a replacement motor as CARB acceptable or confirm what others have expressed about having to conform to newer standards. At least then you will have a price you can compare to the rebuild cost.
When I put one in my PU, it came with a 3 year/ 50K mile warranty. That was many years ago and OK doesn't have vehicle inspections. It was a drop in and everything just bolted up.
Dead Parrot is offline   Reply With Quote
Old 08-24-2013, 12:44 AM   #20
nheller76
Registered User
 
nheller76's Avatar
 
Join Date: Sep 2012
Location: salem oregon
Posts: 281
Re: Crate engine for 78 350 CA truck?

Reading this makes me happy I live in Oregon! U CA guys need to riot! This emissions stuff is for the birds!
Posted via Mobile Device
__________________
Faith and Patience with my truck, that is what i pray for every day!

See my build http://67-72chevytrucks.com/vboard/s...d.php?t=580013
nheller76 is offline   Reply With Quote
Old 08-24-2013, 01:41 AM   #21
Skunksmash
Registered User
 
Skunksmash's Avatar
 
Join Date: Sep 2012
Location: TX
Posts: 1,014
Re: Crate engine for 78 350 CA truck?

They must be going over these vehicles with a fine tooth comb in cali. Here in TX, there are a number of ways to beat the test. Most people don't know how and thus won't do it, but us mechanical types could do it with ease if we want to.
Skunksmash is offline   Reply With Quote
Old 08-24-2013, 02:57 AM   #22
78 Big10 454
78 Big10 454
 
78 Big10 454's Avatar
 
Join Date: Jul 2008
Location: Pismo Beach, CA
Posts: 839
Re: Crate engine for 78 350 CA truck?

rfmaster has hit the nail on the head. That's the route I'd follow.
__________________
1978 Chevy SWB C-10 2WD 454/400
78 Big10 454 is offline   Reply With Quote
Old 08-24-2013, 03:18 AM   #23
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,256
Re: Crate engine for 78 350 CA truck?

http://www.summitracing.com/parts/na...7353/overview/



Seems like its a direct replacement.
Posted via Mobile Device
__________________
" That didnt make it any newer "
" Dont antique the equipment "
KQQL IT is offline   Reply With Quote
Old 08-24-2013, 03:22 AM   #24
78trk
Registered User
 
Join Date: Aug 2012
Location: lakeside california
Posts: 18
Re: Crate engine for 78 350 CA truck?

GM makes a long block 350 290 hp part # 12499529 that is for 79 and earlier emissions.
It has a lot of good parts in it and you just put your old engine parts on it.
It is about $ 2,200. I am running one in my truck now with 45,000 miles on it.
Look up GMPartsDirect.
78trk is offline   Reply With Quote
Old 08-24-2013, 03:24 AM   #25
KQQL IT
At the body shop.
 
KQQL IT's Avatar
 
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,256
Re: Crate engine for 78 350 CA truck?

290hp said 76 and before.
Posted via Mobile Device
__________________
" That didnt make it any newer "
" Dont antique the equipment "
KQQL IT is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com