GA Kenne Bell Supercharger for an LS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smokinstang70 · 09-03-2013, 09:51 PM

I have a POLISHED KENNE BELL supercharger for the LS series of engines. I have the supercharger current installed on my 6.0 installed in a 64 nova. Supercharger kit is complete... Blower, 8 rib pulley set, inner cooler, fuel rails, blower belt and computer tune. Everything for $3500 plus shipping. Unit was over $7k new. Will not be disappointed!!!

Walter (912)-429-9375
Posted via Mobile Device

70ptta · 09-04-2013, 12:34 AM

any pics and will it fit a 5.3?

Last_Paladin · 09-04-2013, 08:10 AM

I am very interested, pending pics. Text sent.

**Hart_Rod** · 09-05-2013, 01:30 PM

Cathedral or rectangular port? Would like to see pictures also.

Last_Paladin · 09-05-2013, 10:25 PM

Quote:

Originally Posted by Hart_Rod

Cathedral or rectangular port? Would like to see pictures also.

It's on an LS1 so I assume Cathedral.

Last_Paladin · 09-05-2013, 10:26 PM

I've been texting. I will take it.

**Hart_Rod** · 09-05-2013, 11:03 PM

Quote:

Originally Posted by Last_Paladin

It's on an LS1 so I assume Cathedral.

5.7 is an LS1. 6.0 could be a LQ4 or LQ9, so it could be either...
Posted via Mobile Device

BossHogg69 · 09-06-2013, 08:42 AM

Did this sell?

btw, the 6.0 LQ motors are cathedral port.

Last_Paladin · 09-06-2013, 09:24 AM

Quote:

Originally Posted by Hart_Rod

5.7 is an LS1. 6.0 could be a LQ4 or LQ9, so it could be either...
Posted via Mobile Device

Hi, I talked to them, got pics, been texting back and forth. No speculation here, he said it's on an ls1.

**Hart_Rod** · 09-06-2013, 10:18 AM

Quote:

Originally Posted by BossHogg69

Did this sell?

btw, the 6.0 LQ motors are cathedral port.

My bad, I thought that the LQ9s had square port heads.

Quote:

Originally Posted by Last_Paladin

Hi, I talked to them, got pics, been texting back and forth. No speculation here, he said it's on an ls1.

No worries. He said 6.0 in the original post, which I thought was an LS2. Also, he should reply to this thread which would eliminate confusion. We are not allowed to use PMs to make deals and I would assume texting would fall under the same category. Congrats on the purchase.
Posted via Mobile Device

Last_Paladin · 09-06-2013, 07:02 PM

Quote:

Originally Posted by Hart_Rod

My bad, I thought that the LQ9s had square port heads.

No worries. He said 6.0 in the original post, which I thought was an LS2. Also, he should reply to this thread which would eliminate confusion. We are not allowed to use PMs to make deals and I would assume texting would fall under the same category. Congrats on the purchase.
Posted via Mobile Device

I replied in thread with an I'll take it, which I believe matches the rules.

From what I can tell, this gent is selling it for a friend. Thus the confusion about the 6.0L. In text, I got that it's on a 2001 LS1 from a Corvette.

LS2 is a 6.0L, as is an LQ4, LQ9, LY6 etc...

smokinstang70 · 09-07-2013, 10:38 PM

Supercharger has been sold... Had supercharger posted on several forums and it was honestly sold to the first person who told me they would "take it". I want to make sure I follow the rules of the forum and wanted to let you guys know it had been sold. If the transaction falls through I will definitely let everyone know. Thank you so much for all the questions and interests. I just want it to go to a good home....

Thanks
Walter
Posted via Mobile Device

**68jewel** · 09-23-2013, 07:55 PM

I may be selling one guys. Thinking about going in a different direction myself. Stay tuned and give me some time to figure a few things out. Mine is for LS3/L92 and L99 rectangular heads only. It is the 3.6 liquid cooled with about 1000 miles on it and has the 8-rib pulley on it. It also has the TurnKey Engines tensioner bracket on it for belt slippage prevention. It won't be $3500 though. I'm possibly looking to get $4500. This price warrants the tensioner upgrade as well as pulley upgrade and comes with injectors and 4" intake tube. You can see the tensioner bracket on the front next to the 8-rib pulley.
Posted via Mobile Device
Posted via Mobile Device

Last_Paladin · 09-28-2013, 01:46 PM

Quote:

Originally Posted by 68jewel

I may be selling one guys. Thinking about going in a different direction myself. Stay tuned and give me some time to figure a few things out. Mine is for LS3/L92 and L99 rectangular heads only. It is the 3.6 liquid cooled with about 1000 miles on it and has the 8-rib pulley on it. It also has the TurnKey Engines tensioner bracket on it for belt slippage prevention. It won't be $3500 though. I'm possibly looking to get $4500. This price warrants the tensioner upgrade as well as pulley upgrade and comes with injectors and 4" intake tube. You can see the tensioner bracket on the front next to the 8-rib pulley.
Posted via Mobile Device
Posted via Mobile Device

You should probably start your own thread. That said, I am in line to buy.

**68jewel** · 09-28-2013, 04:41 PM

Quote:

Originally Posted by Last_Paladin

You should probably start your own thread. That said, I am in line to buy.

Will do when I finally decide to sell which should be soon. I'll keep you in mind first. Thanks!
Posted via Mobile Device

09-03-2013, 09:51 PM	#1
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Kenne Bell Supercharger for an LS I have a POLISHED KENNE BELL supercharger for the LS series of engines. I have the supercharger current installed on my 6.0 installed in a 64 nova. Supercharger kit is complete... Blower, 8 rib pulley set, inner cooler, fuel rails, blower belt and computer tune. Everything for $3500 plus shipping. Unit was over $7k new. Will not be disappointed!!! Walter (912)-429-9375 Posted via Mobile Device __________________ "Love Affair" Build Thread

09-04-2013, 12:34 AM	#2
70ptta Registered User Join Date: Jul 2007 Location: san jose ca Posts: 172	Re: Kenne Bell Supercharger for an LS any pics and will it fit a 5.3?

09-04-2013, 08:10 AM	#3
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 474	Re: Kenne Bell Supercharger for an LS I am very interested, pending pics. Text sent.

09-05-2013, 01:30 PM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,862	Re: Kenne Bell Supercharger for an LS Cathedral or rectangular port? Would like to see pictures also. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

09-05-2013, 10:26 PM	#6
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 474	Re: Kenne Bell Supercharger for an LS I've been texting. I will take it.

09-06-2013, 08:42 AM	#8
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Kenne Bell Supercharger for an LS Did this sell? btw, the 6.0 LQ motors are cathedral port. __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

09-07-2013, 10:38 PM	#12
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Kenne Bell Supercharger for an LS Supercharger has been sold... Had supercharger posted on several forums and it was honestly sold to the first person who told me they would "take it". I want to make sure I follow the rules of the forum and wanted to let you guys know it had been sold. If the transaction falls through I will definitely let everyone know. Thank you so much for all the questions and interests. I just want it to go to a good home.... Thanks Walter Posted via Mobile Device __________________ "Love Affair" Build Thread

09-23-2013, 07:55 PM	#13
68jewel On the path to financial ruin! Join Date: Jan 2009 Location: Dallas, TX Posts: 722	Re: Kenne Bell Supercharger for an LS I may be selling one guys. Thinking about going in a different direction myself. Stay tuned and give me some time to figure a few things out. Mine is for LS3/L92 and L99 rectangular heads only. It is the 3.6 liquid cooled with about 1000 miles on it and has the 8-rib pulley on it. It also has the TurnKey Engines tensioner bracket on it for belt slippage prevention. It won't be $3500 though. I'm possibly looking to get $4500. This price warrants the tensioner upgrade as well as pulley upgrade and comes with injectors and 4" intake tube. You can see the tensioner bracket on the front next to the 8-rib pulley. Posted via Mobile Device Posted via Mobile Device Attached Images __________________ *'72 Chevelle SS--4.0 Whipple LS7, T56 Magnum, 20X9/20X13 HRE 791R, 6-piston Baer brakes, IRS '68 SWB C10--LS3, TKO-600, 22x10/22x12 HRE 948R, C5 suspension, shockwaves, custom frame Ooh Wee's Makeover...http://67-72chevytrucks.com/vboard/s...d.php?t=376280 Last edited by 68jewel; 09-25-2013 at 09:05 PM.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.