10-02-2013, 02:12 PM | #1 |
Registered User
Join Date: Mar 2012
Location: edgartown mass
Posts: 852
|
no power in cab.
ok so my 85 k30 6.2 was turning over fine.(new ip was bleeding it out) then i hit the key and lost every thing. i have power to the fuse box but nothing anywhere else. i split the box and see no wires pulled and i even checked the power coming in and i have 12.68 just like i should but still nothing in the cab works. headlights are the only thing. she wont crank over no glow plugs wtf?? help!!
__________________
1986 c20 "the hillbilly" 350 sm465 3.42gears 21mpg at 70mph 1985 k30 "the ice cream truck from hell" no rust az truck 197-8??? c30 "ramp truck" 454 1978 monte carlo 350 350th with 2.73 gears. no rust. sc car |
10-02-2013, 02:16 PM | #2 |
Registered User
Join Date: Feb 2012
Location: Big Valley. Alberta
Posts: 674
|
Re: no power in cab.
Do you have power at the junction block on firewall beside the brake booster? There is a fusable link from starter to that block that powers the cab if I remember correctly??
Posted via Mobile Device
__________________
1977 Chev C30 454/465/14ff DRW 1974 Chev C20.350/465/14ff " Rock n Roll ain't noise pollution" |
10-02-2013, 02:20 PM | #3 |
Registered User
Join Date: Mar 2012
Location: edgartown mass
Posts: 852
|
Re: no power in cab.
yep was the first thing i checked. i have power every where but the cab. that red wire is the main feed right?
__________________
1986 c20 "the hillbilly" 350 sm465 3.42gears 21mpg at 70mph 1985 k30 "the ice cream truck from hell" no rust az truck 197-8??? c30 "ramp truck" 454 1978 monte carlo 350 350th with 2.73 gears. no rust. sc car |
10-02-2013, 02:48 PM | #4 |
Registered User
Join Date: Feb 2012
Location: Big Valley. Alberta
Posts: 674
|
Re: no power in cab.
I believe so...I am trying to think what else to check & drawing a blank now.Pretty sure that is the only power feed into the cab,but someone else should be able to clarify it.
Posted via Mobile Device
__________________
1977 Chev C30 454/465/14ff DRW 1974 Chev C20.350/465/14ff " Rock n Roll ain't noise pollution" |
10-02-2013, 03:46 PM | #5 |
Registered User
Join Date: Mar 2012
Location: edgartown mass
Posts: 852
|
Re: no power in cab.
update.
tryed the truck again. cranked for a bit then stoped so thinking maybe something is getting hot. but still cant get her to fire off.
__________________
1986 c20 "the hillbilly" 350 sm465 3.42gears 21mpg at 70mph 1985 k30 "the ice cream truck from hell" no rust az truck 197-8??? c30 "ramp truck" 454 1978 monte carlo 350 350th with 2.73 gears. no rust. sc car |
10-02-2013, 04:37 PM | #6 |
Registered User
Join Date: Aug 2013
Location: San Diego
Posts: 111
|
Re: no power in cab.
I'm thinking by the sounds of it perhaps your ignition switch took a crap..... I think the best way is to check for keyed power at the fuse box with key on.... perhaps that's the issue
|
10-02-2013, 08:28 PM | #7 |
Registered User
Join Date: Mar 2012
Location: edgartown mass
Posts: 852
|
Re: no power in cab.
clapage that is what i am thinking too. any other way to tell?? and how do i geet the thing out?
__________________
1986 c20 "the hillbilly" 350 sm465 3.42gears 21mpg at 70mph 1985 k30 "the ice cream truck from hell" no rust az truck 197-8??? c30 "ramp truck" 454 1978 monte carlo 350 350th with 2.73 gears. no rust. sc car |
Bookmarks |
|
|