Wiper motor/switch help

[earl84]

This is what my wiper motor looks like. Can anyone confirm it is a single speed motor? It has 4 terminals, and I am not really sure which terminal is for what. The original wiring has been replaced, and I took pictures of the old and still have a pile of old wiring, but it was kind of funky and now I can't tell what goes where. The PO just had a toggle switch to run it, so it only ran in one speed. I am asking so that I can order the correct wiper switch as well as get this hooked back up. I just finished installing an AAW Wiring harness, and this is the last thing to do.

Also, can I order a two speed motor and a wiper switch with two speeds and a washer function? My truck has a washer bottle, but no pump as far as I know. Any help is greatly appreciated.

[Captainfab]

That does look like a 2 speed wiper motor without the washer pump. You can buy replacement washer pumps, but I don't know if they come with the 'propeller' that goes on the shaft to drive the pump. Here is another thread that should help you with the wiring.

http://www.67-72chevytrucks.com/vboa...t=wiper+wiring

[earl84]

Thanks, Captain, I will take a closer look at these and figure out what I need to do. Appreciate it.

[61K10]

can you put a 63-66 wiper motor in a 60-62?

[Captainfab]

I know that the '60 uses an oddball wiper motor. I'm not sure if '61 uses that same one, or if '61 and '62 use the same motor. I've never tried to use a '63-'72 wiper motor in a '60-'62. Like most things, anything is possible with enough determination.

Originally Posted by 61K10

can you put a 63-66 wiper motor in a 60-62?