suburban back seats.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 10-29-2013, 07:46 PM

i have access to seats from a 1997 suburban. The second row and third row. Not sure which ones fit best. The seller says the second row has a built in armrest and the third row is smaller. Are these almost bolt in? Thanks

Sacramento70 · 11-09-2013, 04:45 AM

just measure the width between your blazers wheel wells and measure the seats and if one fits youll have to make brackets of course

Chulisohombre · 11-11-2013, 01:07 PM

I think it's the third row that fits in our blazers. The newer trucks had a wider second seat than our blazers. As was said you will need to build brackets as well to fit it. Ours doesn't have the drop floor for foot room in front of the rear seats.

brandoncpm · 11-13-2013, 02:28 AM

I just installed a third row seat from a 93 suburban in my 72 blazer this week. It fits perfectly. Obviously you will need to make some brackets to make it mount safely. Also got the two front seats in the deal. Fabbed up some custom brackets to keep the passenger seat folding forward like the original. I like it, it does sit a little higher than the original and if you are tall and hit a bump you may hit your head on the rollbar. Not bad for $200.

hotrodhomi · 11-14-2013, 03:06 AM

I have the 3rd row seat from a 97 in mine.

Chulisohombre · 11-14-2013, 05:36 PM

That seat looks good there. I don't like the ones with a headrest. Those look way outa place with the top off. Nice blazer hotrodhomi.

10-29-2013, 07:46 PM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	suburban back seats.... i have access to seats from a 1997 suburban. The second row and third row. Not sure which ones fit best. The seller says the second row has a built in armrest and the third row is smaller. Are these almost bolt in? Thanks Attached Images __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

11-09-2013, 04:45 AM	#2
Sacramento70 Blazer Fanatic Join Date: May 2009 Location: Sacramento, ca Posts: 249	Re: suburban back seats.... just measure the width between your blazers wheel wells and measure the seats and if one fits youll have to make brackets of course __________________ 1970 Chevy blazer

11-11-2013, 01:07 PM	#3
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: suburban back seats.... I think it's the third row that fits in our blazers. The newer trucks had a wider second seat than our blazers. As was said you will need to build brackets as well to fit it. Ours doesn't have the drop floor for foot room in front of the rear seats.

11-13-2013, 02:28 AM	#4
brandoncpm Registered User Join Date: Jan 2013 Location: Butte Falls Oregon Posts: 41	Re: suburban back seats.... I just installed a third row seat from a 93 suburban in my 72 blazer this week. It fits perfectly. Obviously you will need to make some brackets to make it mount safely. Also got the two front seats in the deal. Fabbed up some custom brackets to keep the passenger seat folding forward like the original. I like it, it does sit a little higher than the original and if you are tall and hit a bump you may hit your head on the rollbar. Not bad for $200.

11-14-2013, 03:06 AM	#5
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: suburban back seats.... I have the 3rd row seat from a 97 in mine. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht Last edited by hotrodhomi; 11-14-2013 at 03:07 AM. Reason: pic

11-14-2013, 05:36 PM	#6
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: suburban back seats.... That seat looks good there. I don't like the ones with a headrest. Those look way outa place with the top off. Nice blazer hotrodhomi.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.