Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-30-2013, 03:09 PM | #1 |
Registered User
Join Date: Nov 2012
Location: West Des Moines, Iowa
Posts: 450
|
99 LS1/4L60E, set up for standalone
I have a friend selling the LS1 out of his 78 Delta 88.
It will come complete with the modded harness, fuse panel, intake ducting, f-body headers and everything you need to do a standalone swap. Motor has about 90k on it, trans is a low mileage GM reman. Mods: LS6 intake LS6 heads - cut .015 for compression TSP Torquer 2 cam PRC duals/Ti retainers Comp pushrods LS7 lifters LS2 timing set LS6 oil pump New gaskets top to bottom Circle D 3200 converter Transgo shift kit Tune is done, VATS deleted, etc... If you know what gear/tire you're going to run on your swap I can reconfigure output so you won't have to do anything with the tune once installed - hook up power, grounds and hit the key and it will light right up. All you would need with this setup is a fuel pump, electric fan and driveshaft. Otherwise it's a complete ready to run standalone LS swap. It's still in the car, if you're close and want to come drive it you're welcome to do so. He's looking for $6,000. When you price a dropout(3k), add up all the harness, mods, etc...you'll see you're serious $ ahead. Shipping is entirely at your expense. |
Bookmarks |
|
|