The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-15-2013, 01:40 PM   #1
vanhow10
Registered User
 
Join Date: Sep 2013
Location: Moore, OK
Posts: 12
Exhaust Recommendations 65 GMC 4x4 305e

I'm looking for recommendations on what to do with my leaky exhaust. For the time being I am going to run the original 305e V-6.

I think I would like to increase the diameter of the exhaust pipes and a run a dual exhaust.

Do I need to have some kind of cross over? or can the exhaust have two separate runs to the back of the truck?
vanhow10 is offline   Reply With Quote
Old 12-15-2013, 01:43 PM   #2
Rich 5150 69
Registered User
 
Rich 5150 69's Avatar
 
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
Re: Exhaust Recommendations 65 GMC 4x4 305e

I would keep the tube size down to 2 inch if your changing to duals with either a x or h pipe, run all the way to the back, this will help keep the low end power.
__________________
`64 C10 vortec 350/350/373 posi
`69 RS/SS 350/350/308
`37 Ford 406/350/324 traclock
`68 Dart 370/904/323 suregrip
Rich 5150 69 is offline   Reply With Quote
Old 12-15-2013, 01:59 PM   #3
FetchMeAPepsi
Registered User
 
FetchMeAPepsi's Avatar
 
Join Date: Apr 2011
Location: Edmond, Ks
Posts: 595
Re: Exhaust Recommendations 65 GMC 4x4 305e

Hey Vanhow10! Mines same as yours except for the year, 62.

For the big block 305v6 the guys at the GMC club (6066gmcclub.com) say first, make sure you dont interfere with shock travel when you run your pipes. it happens all the time.

Then go with a dual exhaust with a crossover pipe You can put Orange RTV Silicone around the ports before installing the header gaskets and they won't leak. Pipes should be 2 1/2 inch in diameter. That's a great engine you got in there buddy. enjoy it's originality!


As for low power, it will tow a house and four condos behind it at idle with both exhausts plugged with concrete. Even more if you put some throttle to it
__________________
Step by steps:
Remove primer to reveal original paint
Rebuild a carburetor
See My Build - Cecilia!
Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
FetchMeAPepsi is offline   Reply With Quote
Old 12-15-2013, 06:14 PM   #4
Snailed
Registered User
 
Snailed's Avatar
 
Join Date: Jul 2013
Location: Portland, Maine
Posts: 219
Re: Exhaust Recommendations 65 GMC 4x4 305e

You can absolutely run a divorced exhaust with no X or H pipes if you want to.
__________________
Daily Driver '66 C10 Fleetside Short Bed - LS swap - 4L80E - Accuair eLevel
Snailed is offline   Reply With Quote
Old 12-15-2013, 06:42 PM   #5
MusicMan70
Senior Member
 
MusicMan70's Avatar
 
Join Date: Feb 2011
Location: Corona, CA
Posts: 1,842
Re: Exhaust Recommendations 65 GMC 4x4 305e

I have 2 1/2" and an X-pipe all the way back with Hooker Aerochambers and yes; you may also run it without the X or H mod as Snailed suggested.
__________________
MusicMan70
1961 GMC Suburban
MusicMan70 is offline   Reply With Quote
Old 12-15-2013, 07:11 PM   #6
FetchMeAPepsi
Registered User
 
FetchMeAPepsi's Avatar
 
Join Date: Apr 2011
Location: Edmond, Ks
Posts: 595
Re: Exhaust Recommendations 65 GMC 4x4 305e

Quote:
Originally Posted by Snailed View Post
You can absolutely run a divorced exhaust with no X or H pipes if you want to.
You can run a dual exhaust with butter flavor and put popcorn in it if you want to, but for best performance you'll want to have a crossover pipe. These balance the back pressure and increase performance.


I guess it all depends on what you're looking to do. If you just want two pipes out the back and don't really want to put the time into it then go straight pipes. it'll be cheaper by a little.
__________________
Step by steps:
Remove primer to reveal original paint
Rebuild a carburetor
See My Build - Cecilia!
Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
FetchMeAPepsi is offline   Reply With Quote
Old 12-15-2013, 08:23 PM   #7
vanhow10
Registered User
 
Join Date: Sep 2013
Location: Moore, OK
Posts: 12
Re: Exhaust Recommendations 65 GMC 4x4 305e

Thanks for the insights. I was wondering why the cross-over was important.
vanhow10 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:59 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com