|
12-31-2013, 01:20 PM
|
#1 |
|
Senior Member
 
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
|
NP241 vs np205 length
Does anyone know the difference in length between an np205 and an np241 with a fixed rear yoke kit? Distance from front mating surface to end of the output shaft or to the u-joint centerline.
__________________
Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! |
|
|
|
12-31-2013, 07:48 PM
|
#2 |
|
Registered User
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
|
Re: NP241 vs np205 length
99% sure its 4" difference. i had a 400 205 in my truck and swapped it to a JB conversions sye 241. i reused my same driveshaft and just flipped my 56" springs around to get the wheelbase stretch.
56" springs are 4" offset center pins. its 4 inches or very close. if im not mistaken the 205 is 12" from face and the 241 came to just over 16. i have had a few different combos and use the same driveshaft for a few. got lucky i guess. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
