Cracked head - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chris1htx · 01-04-2014, 02:46 PM

Anyone know where I can get a replacement head for an inline 6? The casting number is 14015499

79Betty · 01-04-2014, 05:20 PM

Lots of places. A cracked inline head is very common but it is possible to be pinned and fixed. JET might be able to. Found out not long ago parts stores have motors available. Call around to machine shops maybe they can fix it?

SamsAutoParts73-87 · 01-05-2014, 01:19 AM

Does Jasper sell heads?

My first call would be to junkyards in the area, but I would try my machine shop as well.
-Sam

**Warrens69GMC** · 01-05-2014, 02:15 AM

Is you cylinder head the integrated intake manifold one?

Like this?
http://www.ebay.com/itm/NEW-GM-CYLIN...p2054897.l4275

if so, you may want to switch to the non-integrated head.

chris1htx · 01-06-2014, 09:58 PM

Quote:

Originally Posted by Warrens69GMC

Is you cylinder head the integrated intake manifold one?

Like this?
http://www.ebay.com/itm/NEW-GM-CYLIN...p2054897.l4275

if so, you may want to switch to the non-integrated head.

I'm not too familiar with the conversion. What would I need to do differently?

79Betty · 01-05-2014, 08:38 AM

Well we'll repair machine And build it. It can be pricey though. I'd clean it real real good and magnaflux it. That will show how bad the crack is and if it is fixable.

01-04-2014, 02:46 PM	#1
chris1htx Registered User Join Date: Jan 2013 Location: Houston, TX Posts: 178	Cracked head Anyone know where I can get a replacement head for an inline 6? The casting number is 14015499

01-04-2014, 05:20 PM	#2
79Betty Registered User Join Date: Jan 2013 Location: Jasper, IN Posts: 948	Re: Cracked head Lots of places. A cracked inline head is very common but it is possible to be pinned and fixed. JET might be able to. Found out not long ago parts stores have motors available. Call around to machine shops maybe they can fix it? __________________ When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10

01-05-2014, 01:19 AM	#3
SamsAutoParts73-87 Registered User Join Date: Feb 2013 Location: Rome PA Posts: 340	Re: Cracked head Does Jasper sell heads? My first call would be to junkyards in the area, but I would try my machine shop as well. -Sam __________________ 1987 Chevy R30 CC 454/4spd Work Truck 1979 Chevy K10 SWB 350/4spd/NP205, 1979 Chevy C10 LWB 350/TH350 Project 1981 Chevy K30 350/Th400/NP205 1986 Chevy K30 CUCV 6.2L/TH400/NP208

01-05-2014, 02:15 AM	#4
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,622	Re: Cracked head Is you cylinder head the integrated intake manifold one? Like this? http://www.ebay.com/itm/NEW-GM-CYLIN...p2054897.l4275 if so, you may want to switch to the non-integrated head. __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

01-05-2014, 08:38 AM	#6
79Betty Registered User Join Date: Jan 2013 Location: Jasper, IN Posts: 948	Re: Cracked head Well we'll repair machine And build it. It can be pricey though. I'd clean it real real good and magnaflux it. That will show how bad the crack is and if it is fixable. __________________ When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.