The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-29-2014, 12:31 AM   #1
swissarmychainsaw
Registered User
 
Join Date: Jun 2009
Location: san francisco, ca (east bay)
Posts: 674
Dead Battery: What the Heck am I Missing?

1975 GMC 350/350 pickup
had it about 6 months, daily driver. When I bought it I put in a Brand New battery from O'reilly's

Yesterday it's a bit misty in the morning so I turn on my lights on the way to work. Yeah, I never turn them off.
Battery was totally dead, no dash lights, idiot lights, etc.

So at night, when I get off work, a buddy gives me a jump.
It takes a minute but I get it fired up and drive it on the fwy about 30 minutes home.
Park at my house, and shut it off. Decided I should pull up in the driveway and go to start it. DEAD.
No lights of ANY kind. FLAT DEAD.

HRM. ok. Pull it out, bring it to the garage and Put my Battery Tender 1.25A (for a motorcycle) on it and let it sit overnight.

In the Morning TOTALLY DEAD.
Battery Tender shows the red light (as in charging, but below 80% full).
Try and jump start it with the wife's car, no dice.

I say "hey this battery is junk" and take it to the store.
Dude tests it, says this battery is good but needs a charge.
I say, man, I don't think it is!

He charges it (during the day) tests is and says "good to go".

Bring it home, put in truck. SAME THING. DEAD. No lights at all.

Volt meter shows 14v.

Is there a main fuse I am missing somewhere?

I'm stumped.

The fuses look all ok. (thanks for putting them under the dash like that btw! yea!)
swissarmychainsaw is offline   Reply With Quote
Old 01-29-2014, 12:55 AM   #2
Gregs71
Registered User
 
Join Date: Nov 2006
Location: Amador County, Ca.
Posts: 229
Re: Dead Battery: What the Heck am I Missing?

Could it be dirty / corroded terminals??
__________________
1995 GMC 4x4 1/2 ton
1999 Jeep Wrangler w/ 33's
68 camaro 350/350
1987 Chevy 3/4 ton 4x4
Suzuki DRZ 400s Dual Sport
1971 chevy long bed 2x4
194? Dodge 2.5 ton
1980 Chevy Cheyenne 4x4 1/2 ton I6/sm455
1989 Chevy V30 crewcab dually 454/TH400
Gregs71 is offline   Reply With Quote
Old 01-29-2014, 01:53 AM   #3
mrolds88
Registered User
 
Join Date: Jul 2011
Location: WV
Posts: 946
Re: Dead Battery: What the Heck am I Missing?

Put everything back together. Then starting at the battery, use your meter and go through the system. Start at the + terminal and the block. Then move through the system until you get a blank. Also check your terminal block on the back of the fuseblock.
__________________
72 GMC C2500 402/Th400 first truck (still have)
77 GMC C3500 CC dually Sold
70 C50 dump truck "Rusty"
87 K10 Suburban Sold
93 K2500 xcab 6.5TD
96 GMC K2500 Suburban 6.5 TD
mrolds88 is offline   Reply With Quote
Old 01-29-2014, 02:02 AM   #4
rs74
Senior Member
 
rs74's Avatar
 
Join Date: Jun 2010
Location: Illinois
Posts: 2,957
Re: Dead Battery: What the Heck am I Missing?

My post didn't go through earlier. I would check your main battery cables first at the starter and where you ground is. Put your meter on the positive cable at the starter to see if you are getting a good reading there. Just to rule out bad cables.
__________________
Roy
85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818

1987 R10 shortie
rs74 is offline   Reply With Quote
Old 01-29-2014, 11:08 AM   #5
cadillac_al
Registered User
 
Join Date: Oct 2013
Location: Maine
Posts: 2,376
Re: Dead Battery: What the Heck am I Missing?

Pretty interesting. I didn't think you could boost a vehicle when the battery is so dead it won't light the dash lights. Something bust have burnt out. Just keep checking voltage , down at the starter and up to the firewall. I'm thinking either the fusible link down by the starter or that main fuse on the firewall.

I never turn my lights on during the day because I always leave them on too. The fog or rain would have to be pretty heavy for me to turn on my lights in the day daytime. I feel your pain.
__________________
76 Chevy K20
76 GMC K15
77 Chevy C10
77 Chevy K10
cadillac_al is offline   Reply With Quote
Old 01-29-2014, 11:43 AM   #6
swissarmychainsaw
Registered User
 
Join Date: Jun 2009
Location: san francisco, ca (east bay)
Posts: 674
Re: Dead Battery: What the Heck am I Missing?

Well, somehow, and it's obvious now...I blew the main fuse on the Firewall.

Found the one with the biggest wire and opened it up.
I don't have many of these old glass fuses, so I could only put a 10A in there for now, but that was enough to start it.

What are the others for?

swissarmychainsaw is offline   Reply With Quote
Old 01-29-2014, 12:43 PM   #7
old Rusty C10
Robert Olson Transport
 
old Rusty C10's Avatar
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
Re: Dead Battery: What the Heck am I Missing?

someone prolly replaced a fusible link
__________________
Bob



1951 International running on a squarebody chassis


"If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board"
http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!)


PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport

Live each day to the fullest.. you never know when fate is going to pull the rug out from under you...
I hate cancer!!
old Rusty C10 is offline   Reply With Quote
Old 01-29-2014, 02:34 PM   #8
swissarmychainsaw
Registered User
 
Join Date: Jun 2009
Location: san francisco, ca (east bay)
Posts: 674
Re: Dead Battery: What the Heck am I Missing?

I only had smaller glass fuses, which would allow the truck to start, but when I turned it off, it would blow the fuse!

Stopped at auto parts place this am and put in a 30A fuse, and it seems to
be fine now.

I would like to replace all the fuses with the newer blade type.
Easier to handle and more readily available I think. Is that worth the trouble?

Also, anyone know what those other fuses are for in the red circles?
swissarmychainsaw is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:22 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com