IA 1969 C20 Parts 396 Pullies, Brackets, Etc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 02-04-2014, 09:16 PM

I have some parts for sale from a project I’m building. All parts are from a 1969 Chevy Longhorn C20. Parts are best offer as well. Prices do not include shipping, and are located in Mitchellville, Iowa. I might be able to meet somewhere or set up some shipping arrangements as well.

396 good running engine. Mileage unknown. Engine doesn’t smoke, doesn’t have excessive blow by, doesn’t leak or use oil. It starts and runs fine. Carb could use a rebuild, or good cleaning as this truck has been sitting for a while with the occasional run to the dump. Headers are leaking, but other than that, no weird noises. Comes with air cleaner, carb to pan, HEI dist, starter, plug wires, water pump, and fuel pump.
Block Casting numbers 3955272
Suffix Code T0509YQ
This engine was made at the Tonowanda New York plant on May 09, and is a 69 truck engine 310hp with TH400 trans. $650 OBO

A/C compressor brackets, alternator, alternator brackets, engine pulleys, and power steering brackets with pump and reservoir. It’s missing the long adjusting bracket as far as I can tell. Will come with all bolts as/if needed. AC comp can go as well but it is locked up. $300

Headers $40

Fan with clutch $30

Engine stands and mounts $150

TH400 2wd trans. Needs rebuilt. It will move in reverse but is slipping. No forward movement. $75 with converter

Auto trans cross member with shift linkage $50

Complete drum brake front suspension for parts or sell complete.

Power steering box. Normal wear. $30

rusty knuckles 5 · 02-04-2014, 10:18 PM

interested in the power steering brackets as shown in picture

**cst204x4** · 02-04-2014, 10:24 PM

Are you parting whole truck? If so price on auxiliary battery tray and windshield washer jug bracket. Thanks

**Dieselwrencher** · 02-04-2014, 10:57 PM

Sorry guys, I'm not parting out the entire truck and I'm not ready to seperate items yet other than what's in the list. Thanks Ryan.

**uncle** · 02-05-2014, 06:46 AM

Looks like compressor is missing at least 2 brackets. I don't need alt or compressor just the brackets. Would you do 300 shipped for all you mentioned above?

**JDL** · 02-05-2014, 11:07 PM

I am interested in Power steering box. Normal wear. $30

9teen69 · 02-06-2014, 12:18 AM

Take fan if 7 blade, can't tell from photos. 78748

Ozzy2013 · 02-06-2014, 12:43 AM

Would you sell just the power steering brackets by themselves or with the pump ?Dont need the others so figured id try thanks either way Oz.

J kippin · 02-06-2014, 10:25 AM

if you have all the brackets and pulleys for a bbc (a/c power steering and alternator) fan would be nice too I will take them let me know your pay pal and I can send an immediate payment

John

**Dieselwrencher** · 02-06-2014, 12:34 PM

Quote:

Originally Posted by uncle

Looks like compressor is missing at least 2 brackets. I don't need alt or compressor just the brackets. Would you do 300 shipped for all you mentioned above?

PM sent.

**Dieselwrencher** · 02-06-2014, 12:40 PM

Quote:

Originally Posted by rusty knuckles 5

interested in the power steering brackets as shown in picture

Quote:

Originally Posted by Ozzy2013

Would you sell just the power steering brackets by themselves or with the pump ?Dont need the others so figured id try thanks either way Oz.

Quote:

Originally Posted by J kippin

if you have all the brackets and pulleys for a bbc (a/c power steering and alternator) fan would be nice too I will take them let me know your pay pal and I can send an immediate payment

John

Guys Uncle is in line first on the brackets and pulleys. Thanks.

**Dieselwrencher** · 02-06-2014, 12:43 PM

Quote:

Originally Posted by JDL

I am interested in Power steering box. Normal wear. $30

Ok,let me know if you would like to meet up sometime. I'll be in sully Saturday afternoon if that will help you.

**Dieselwrencher** · 02-06-2014, 12:43 PM

Quote:

Originally Posted by 9teen69

Take fan if 7 blade, can't tell from photos. 78748

I'll check today and report back. Thanks.

J kippin · 02-06-2014, 12:44 PM

no worries if he passes please put me in line for the complete set up same here I don't need the compressor or alternator

John

**Dieselwrencher** · 02-06-2014, 12:47 PM

Quote:

Originally Posted by J kippin

no worries if he passes please put me in line for the complete set up same here I don't need the compressor or alternator

John

Ok John, you're next in line for them.

**uncle** · 02-06-2014, 02:01 PM

I'll take them . Pm returned

**Dieselwrencher** · 02-06-2014, 03:39 PM

Quote:

Originally Posted by 9teen69

Take fan if 7 blade, can't tell from photos. 78748

The fan blade is a 6 not a 7 blade. Sorry.

**uncle** · 02-06-2014, 03:43 PM

6 is correct for big block .

**Dieselwrencher** · 02-06-2014, 03:54 PM

Brackets and pullies sold to Uncle. Thanks Tim.

cwilkie · 02-06-2014, 07:30 PM

What do you want for the carb?

**JDL** · 02-06-2014, 08:22 PM

Quote:

Originally Posted by Dieselwrencher

Ok,let me know if you would like to meet up sometime. I'll be in sully Saturday afternoon if that will help you.

That might in Dubuqe till Saturday am

**Dieselwrencher** · 02-06-2014, 09:34 PM

Quote:

Originally Posted by cwilkie

What do you want for the carb?

I'm keeping the carb with the engine so the buyer can hear it run. Sorry. Ryan.

02-04-2014, 09:16 PM	#1
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	1969 C20 Parts 396 Pullies, Brackets, Etc I have some parts for sale from a project I’m building. All parts are from a 1969 Chevy Longhorn C20. Parts are best offer as well. Prices do not include shipping, and are located in Mitchellville, Iowa. I might be able to meet somewhere or set up some shipping arrangements as well. 396 good running engine. Mileage unknown. Engine doesn’t smoke, doesn’t have excessive blow by, doesn’t leak or use oil. It starts and runs fine. Carb could use a rebuild, or good cleaning as this truck has been sitting for a while with the occasional run to the dump. Headers are leaking, but other than that, no weird noises. Comes with air cleaner, carb to pan, HEI dist, starter, plug wires, water pump, and fuel pump. Block Casting numbers 3955272 Suffix Code T0509YQ This engine was made at the Tonowanda New York plant on May 09, and is a 69 truck engine 310hp with TH400 trans. $650 OBO A/C compressor brackets, alternator, alternator brackets, engine pulleys, and power steering brackets with pump and reservoir. It’s missing the long adjusting bracket as far as I can tell. Will come with all bolts as/if needed. AC comp can go as well but it is locked up. $300 Headers $40 Fan with clutch $30 Engine stands and mounts $150 TH400 2wd trans. Needs rebuilt. It will move in reverse but is slipping. No forward movement. $75 with converter Auto trans cross member with shift linkage $50 Complete drum brake front suspension for parts or sell complete. Power steering box. Normal wear. $30 __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 02-04-2014 at 09:21 PM.

02-04-2014, 10:18 PM	#2
rusty knuckles 5 Registered User Join Date: Dec 2011 Location: coulterville calif Posts: 263	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc interested in the power steering brackets as shown in picture

02-04-2014, 10:24 PM	#3
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 2,006	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc Are you parting whole truck? If so price on auxiliary battery tray and windshield washer jug bracket. Thanks __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

02-04-2014, 10:57 PM	#4
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc Sorry guys, I'm not parting out the entire truck and I'm not ready to seperate items yet other than what's in the list. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-05-2014, 06:46 AM	#5
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc Looks like compressor is missing at least 2 brackets. I don't need alt or compressor just the brackets. Would you do 300 shipped for all you mentioned above?

02-05-2014, 11:07 PM	#6
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,848	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc I am interested in Power steering box. Normal wear. $30 __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

02-06-2014, 12:18 AM	#7
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc Take fan if 7 blade, can't tell from photos. 78748 __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

02-06-2014, 12:43 AM	#8
Ozzy2013 Registered User Join Date: Oct 2013 Location: Elkton Posts: 693	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc Would you sell just the power steering brackets by themselves or with the pump ?Dont need the others so figured id try thanks either way Oz.

02-06-2014, 10:25 AM	#9
J kippin Registered User Join Date: Apr 2012 Location: Cape Neddick Posts: 215	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc if you have all the brackets and pulleys for a bbc (a/c power steering and alternator) fan would be nice too I will take them let me know your pay pal and I can send an immediate payment John

02-06-2014, 12:44 PM	#14
J kippin Registered User Join Date: Apr 2012 Location: Cape Neddick Posts: 215	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc no worries if he passes please put me in line for the complete set up same here I don't need the compressor or alternator John

02-06-2014, 02:01 PM	#16
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc I'll take them . Pm returned

02-06-2014, 03:43 PM	#18
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc 6 is correct for big block .

02-06-2014, 03:54 PM	#19
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc Brackets and pullies sold to Uncle. Thanks Tim. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-06-2014, 07:30 PM	#20
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	Re: 1969 C20 Parts 396 Pullies, Brackets, Etc What do you want for the carb? __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.