My '68 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Camaroguy · 02-09-2014, 10:57 AM

I bought this c10 about 2 months ago. The plan is to give it to my son when he is old enough.

So far I've done the following:
Lowered 4.5/6
C-notch
Wheels - Boss 338's (20x8.5/20x10)
New exhaust (single 3" into flo-pro muffler dumped in front of tire)
New Stereo
Rebuilt top half of motor
Spent countless hours fixing oil leaks.

Here are before and after pics.

trkfrk · 02-09-2014, 11:04 AM

Nice truck! I bet your son can not wait. Lucky!

sic68 · 02-09-2014, 11:12 AM

Nice truck!! You son is one lucky kid.

VeeTwin · 02-09-2014, 11:52 AM

Very good lookin truck!! Can I bother you for the wheel offsets(front and rear)?
Thanks

sic68 · 02-09-2014, 11:59 AM

Quote:

Originally Posted by VeeTwin

Very good lookin truck!! Can I bother you for the wheel offsets(front and rear)?
Thanks

I'm running the same front and back. 22x8.5 with a 4.5 backspace.

cool68 · 02-09-2014, 03:52 PM

Nice

Camaroguy · 02-09-2014, 05:35 PM

VeeTwin, the fronts are 10mm offset which converts to about a 4.75 back spacing. I should have gone with the 14mm which would have been about a 5.25 back space.

I honestly don't remember what I went with on the rears and it doesn't say on the receipt. However, I believe they are about 18mm or about 5.5 back space.

Undone · 02-09-2014, 08:14 PM

Any idea what front seat is out of?

Camaroguy · 02-09-2014, 08:20 PM

It's out of a 2000 Dodge pickup. Not sure what model.

02-09-2014, 10:57 AM	#1
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	My '68 c10 I bought this c10 about 2 months ago. The plan is to give it to my son when he is old enough. So far I've done the following: Lowered 4.5/6 C-notch Wheels - Boss 338's (20x8.5/20x10) New exhaust (single 3" into flo-pro muffler dumped in front of tire) New Stereo Rebuilt top half of motor Spent countless hours fixing oil leaks. Here are before and after pics.

02-09-2014, 11:04 AM	#2
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: My '68 c10 Nice truck! I bet your son can not wait. Lucky! __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

02-09-2014, 11:12 AM	#3
sic68 Registered User Join Date: Jan 2014 Location: denver Colorado Posts: 15	Re: My '68 c10 Nice truck!! You son is one lucky kid.

02-09-2014, 11:52 AM	#4
VeeTwin Registered User Join Date: Jan 2014 Location: Saint George,Utah(non-mormon!) Posts: 28	Re: My '68 c10 Very good lookin truck!! Can I bother you for the wheel offsets(front and rear)? Thanks

02-09-2014, 03:52 PM	#6
cool68 Registered User Join Date: Oct 2013 Location: Stockton, CA Posts: 475	Re: My '68 c10 Nice

02-09-2014, 05:35 PM	#7
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: My '68 c10 VeeTwin, the fronts are 10mm offset which converts to about a 4.75 back spacing. I should have gone with the 14mm which would have been about a 5.25 back space. I honestly don't remember what I went with on the rears and it doesn't say on the receipt. However, I believe they are about 18mm or about 5.5 back space.

02-09-2014, 08:14 PM	#8
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: My '68 c10 Any idea what front seat is out of?

02-09-2014, 08:20 PM	#9
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: My '68 c10 It's out of a 2000 Dodge pickup. Not sure what model.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.