02-17-2014, 10:50 PM | #1 |
Registered User
Join Date: Mar 2010
Location: san jose, california
Posts: 508
|
control arm bolts ?
i have a 66 C10 with a 75 front suspension. one of the bolts that holds the upper control arm is stripped and need to know if this will fit ?
http://www.classicparts.com/1971-91-.../#.UwLJmPldWPA can i get it at a local store? thanks
__________________
'66 chevy lwb c10 '65 chevy lwb c20 |
02-18-2014, 01:24 AM | #2 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: control arm bolts ?
That looks like the correct type of part, but that part numbner shows to be for a C20 or C30.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
02-18-2014, 11:10 AM | #3 |
Registered User
Join Date: Mar 2010
Location: san jose, california
Posts: 508
|
Re: control arm bolts ?
Do you know if it will fit? I haven't found anything for C10's.
__________________
'66 chevy lwb c10 '65 chevy lwb c20 |
02-18-2014, 12:06 PM | #4 |
Account Suspended
Join Date: Oct 2012
Location: here
Posts: 2,408
|
Re: control arm bolts ?
Couple issues. You should be able to go to Napa or other supplyer and find a similar stud. The problem comes with pulling and replacing....is there room to press a new one back in.
Last edited by Sharps40; 02-18-2014 at 12:24 PM. |
02-18-2014, 12:18 PM | #5 |
Account Suspended
Join Date: Oct 2012
Location: here
Posts: 2,408
|
Re: control arm bolts ?
I think you want part number 7 from LMC....this is for 60-66 models. $3.95 each + Shipping.
http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=86 And looking at the schematic, seems you might just be able to beat em in and out without droppin the crossmember but I spect ye'll have to pull a motor mount. Luck! Last edited by Sharps40; 02-18-2014 at 12:29 PM. |
02-18-2014, 09:18 PM | #6 |
Registered User
Join Date: Mar 2010
Location: san jose, california
Posts: 508
|
Re: control arm bolts ?
hey sharps, do you think that will work with a 75 crossmember?
__________________
'66 chevy lwb c10 '65 chevy lwb c20 |
02-18-2014, 09:38 PM | #7 |
Account Suspended
Join Date: Oct 2012
Location: here
Posts: 2,408
|
Re: control arm bolts ?
Don't know. Go to the lmc catalog and see if the bolts have the same part numbers for 66 and 75. If not take your bad bolt to napa and they can get in the catalog and order ya one or 100.
|
02-19-2014, 12:09 AM | #8 |
Registered User
Join Date: Mar 2010
Location: san jose, california
Posts: 508
|
Re: control arm bolts ?
Ok. Yea I just saw it on the lmc catalog. Thanks
__________________
'66 chevy lwb c10 '65 chevy lwb c20 |
Bookmarks |
|
|