OR Restored/modified console - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daryn67 · 02-22-2014, 07:11 PM

335.00 + shipping

daryn67 · 02-22-2014, 07:16 PM

Side view

**Blazerowner** · 03-15-2014, 11:43 AM

Do you have other pics and what's up with the cup holder area? Is that removable or is it covering damage?

daryn67 · 03-15-2014, 12:22 PM

What pics and angles would you like, and it's a stainless cover and cup holders, not hiding damage just an update. Could include an original cup holder if that was desired.

Daryn

daryn67 · 03-15-2014, 12:29 PM

Side

**Blazerowner** · 03-15-2014, 12:53 PM

I do like it did you buy it aftermarket or make it? Can I see some pics of the inside and with the original cup holder? So does the stainless part come off and the original cup holder bolt back in or is it covered? I thought the cup holder area was one piece with the base? Is it orig black?

daryn67 · 03-15-2014, 06:37 PM

Inside

daryn67 · 03-15-2014, 08:16 PM

Original will go back in exactly like factory. This is an original console that has been sanded and cleaned, repainted and assembled with stainless bolts and screws. Most people have expressed interest in updated features and the cup holders are one of those things. I have original cup holder section that can be installed too, will have to clean one up and paint it. Here is an example on a buckskin tan one I redid.

**Blazerowner** · 03-15-2014, 08:45 PM

You will include the cup holder piece with it? Was there any cracks repaired?

HappyHappyHappy · 03-15-2014, 09:25 PM

Looks really good. I am fixing to refurb a couple i have. (1 red, 1 black). Do you mind telling me what you used to sand it with and what paint you used. Thanks

speedfreak369 · 03-15-2014, 09:44 PM

Quote:

Originally Posted by HappyHappyHappy

Looks really good. I am fixing to refurb a couple i have. (1 red, 1 black). Do you mind telling me what you used to sand it with and what paint you used. Thanks

I have one I need refurbed. It's green but I need it red. Can I have a quote or pm me how I can do the process.

02-22-2014, 07:11 PM	#1
daryn67 Registered User Join Date: Jun 2004 Location: Fruitland idaho Posts: 77	Restored/modified console 335.00 + shipping Attached Images

02-22-2014, 07:16 PM	#2
daryn67 Registered User Join Date: Jun 2004 Location: Fruitland idaho Posts: 77	Re: Restored/modified console Side view Attached Images

03-15-2014, 11:43 AM	#3
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,955	Re: Restored/modified console Do you have other pics and what's up with the cup holder area? Is that removable or is it covering damage? __________________ Kirk 72 Blazer CST 4wd highlander

03-15-2014, 12:22 PM	#4
daryn67 Registered User Join Date: Jun 2004 Location: Fruitland idaho Posts: 77	Re: Restored/modified console What pics and angles would you like, and it's a stainless cover and cup holders, not hiding damage just an update. Could include an original cup holder if that was desired. Daryn

03-15-2014, 12:29 PM	#5
daryn67 Registered User Join Date: Jun 2004 Location: Fruitland idaho Posts: 77	Re: Restored/modified console Side Attached Images

03-15-2014, 12:53 PM	#6
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,955	Re: Restored/modified console I do like it did you buy it aftermarket or make it? Can I see some pics of the inside and with the original cup holder? So does the stainless part come off and the original cup holder bolt back in or is it covered? I thought the cup holder area was one piece with the base? Is it orig black? __________________ Kirk 72 Blazer CST 4wd highlander

03-15-2014, 06:37 PM	#7
daryn67 Registered User Join Date: Jun 2004 Location: Fruitland idaho Posts: 77	Re: Restored/modified console Inside Attached Images

03-15-2014, 08:16 PM	#8
daryn67 Registered User Join Date: Jun 2004 Location: Fruitland idaho Posts: 77	Re: Restored/modified console Original will go back in exactly like factory. This is an original console that has been sanded and cleaned, repainted and assembled with stainless bolts and screws. Most people have expressed interest in updated features and the cup holders are one of those things. I have original cup holder section that can be installed too, will have to clean one up and paint it. Here is an example on a buckskin tan one I redid. Attached Images

03-15-2014, 08:45 PM	#9
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,955	Re: Restored/modified console You will include the cup holder piece with it? Was there any cracks repaired? __________________ Kirk 72 Blazer CST 4wd highlander

03-15-2014, 09:25 PM	#10
HappyHappyHappy Registered User Join Date: Oct 2013 Location: Hattiesburg, MS Posts: 29	Re: Restored/modified console Looks really good. I am fixing to refurb a couple i have. (1 red, 1 black). Do you mind telling me what you used to sand it with and what paint you used. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.