Simple column question on hazard flasher - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OrrieG · 03-25-2014, 11:44 AM

Could someone with a 78-90 stock GM column tell me how the hazard flasher button works? Mine seems to be hanging up and I do not know if it pulls or pushes to engage or if column position is a factor. Looked on line and found lots of parts and wiring diagrams but no owner manuals.... Thanks.

**mr48chev** · 03-25-2014, 12:11 PM

I'd have to look in a book when I get home but am not sure that there is a definitive diagram. I think I have a book that covers that model or a book that covers that switch in another model

I do have a rather bent up 79 El Camino column out of the one my son totaled that should have the same switch. Stay tuned for the afternoon photo essay.

Looking at my OReilly cheat sheet it appears that that switch is used in a ton of vehicles http://www.oreillyauto.com/site/c/de...2100&ppt=C0039

I'm thinking that when you push it in or pull it out there is a sliding plate type switch that hits the right contacts to work the four ways.

OrrieG · 03-25-2014, 01:41 PM

I know it has an outer sleeve and inner button, but both are mia. They are repoped for a few bucks so that is not the issue, just need to know if it pushes or pulls to engage. I noticed when I started the truck the em flashers where working and when I turn off the key one turn signal indicator lamp glows dimmly, enough to discharge the battery over night. I pulled the hazard fuse and no more glow. I will continue to look to, you help is appreciated. Patrick

OrrieG · 03-25-2014, 01:52 PM

Found my answer, push to activate, pull to stop.

not2oldchevy · 03-25-2014, 01:54 PM

Push in to turn on and pull the sleeve to turn off.

OrrieG · 03-25-2014, 02:24 PM

Fixed, I had pushed it in to paint, found a screw that fit, pulled it out and lights off. What a concept. Ordered new plastic pieces and spring, $6 shipped on ebay. Thanks guys.

03-25-2014, 11:44 AM	#1
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Simple column question on hazard flasher Could someone with a 78-90 stock GM column tell me how the hazard flasher button works? Mine seems to be hanging up and I do not know if it pulls or pushes to engage or if column position is a factor. Looked on line and found lots of parts and wiring diagrams but no owner manuals.... Thanks. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

03-25-2014, 12:11 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Simple column question on hazard flasher I'd have to look in a book when I get home but am not sure that there is a definitive diagram. I think I have a book that covers that model or a book that covers that switch in another model I do have a rather bent up 79 El Camino column out of the one my son totaled that should have the same switch. Stay tuned for the afternoon photo essay. Looking at my OReilly cheat sheet it appears that that switch is used in a ton of vehicles http://www.oreillyauto.com/site/c/de...2100&ppt=C0039 I'm thinking that when you push it in or pull it out there is a sliding plate type switch that hits the right contacts to work the four ways. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 03-25-2014 at 12:28 PM.

03-25-2014, 01:41 PM	#3
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Simple column question on hazard flasher I know it has an outer sleeve and inner button, but both are mia. They are repoped for a few bucks so that is not the issue, just need to know if it pushes or pulls to engage. I noticed when I started the truck the em flashers where working and when I turn off the key one turn signal indicator lamp glows dimmly, enough to discharge the battery over night. I pulled the hazard fuse and no more glow. I will continue to look to, you help is appreciated. Patrick __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

03-25-2014, 01:52 PM	#4
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Simple column question on hazard flasher Found my answer, push to activate, pull to stop. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

03-25-2014, 01:54 PM	#5
not2oldchevy Registered User Join Date: Sep 2009 Location: east tennessee Posts: 158	Re: Simple column question on hazard flasher Push in to turn on and pull the sleeve to turn off.

03-25-2014, 02:24 PM	#6
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Simple column question on hazard flasher Fixed, I had pushed it in to paint, found a screw that fit, pulled it out and lights off. What a concept. Ordered new plastic pieces and spring, $6 shipped on ebay. Thanks guys. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.