How do you align lower Front control arm? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aotte1** · 04-05-2014, 10:45 PM

1986, C10 short bed truck.
I am getting ready to remove lower front control arm, but concerned how you position it front to back when reinstalling and tightening the u bolts. I do not see any aligning mechanism. Do you mark it current position on the rod before removal. This is my first experience with this type of lower control arm mounting.
Thanks for the help.
Les

67c10rustbuket · 04-05-2014, 10:48 PM

There is an alignment pin in the front u bolt saddle and a recess in the control arm shaft. No need to mark anything. If you replace the bushings or cross shafts make sure the recess is toward the front of the control arm when you put it back together.

BMERDOC · 04-05-2014, 10:50 PM

When you take it apart you'll see an alignment pin on the rear of the crossmember and a spot in the cross shaft to line it up with. Easy peazy. Consider doing the Caster mod before you reassemble it.

http://67-72chevytrucks.com/vboard/s...d.php?t=501241

BADAZ chevy guy · 04-05-2014, 10:50 PM

All the alignment is in the upper control arm via shims.

67c10rustbuket · 04-05-2014, 11:38 PM

here are a couple pics, should help give you an idea of what keeps the lower A arms aligned. The locating pin is to the front of the truck.

**aotte1** · 04-06-2014, 12:37 AM

Thanks everybody!
Now I can take it all apart tomorrow with confidence that I can get it back together correctly.

And/or a summary of available front suspension parts that improve it, during a basic rebuild. Thing like taller ball joints, etc.

Thanks,
Les

**aotte1** · 04-06-2014, 12:39 AM

Bmerdoc,
Thanks for reference to the lower control arm mod.
Les

SunflowersAndRust · 10-25-2014, 11:39 PM

I am so glad I found this thread.... I have been scratching my head for an hour. This forum rocks!

SCOTI · 10-26-2014, 12:16 PM

Quote:

Originally Posted by SunflowersAndRust

I am so glad I found this thread.... I have been scratching my head for an hour. This forum rocks!

Yes it does. One of the best on the web IMHO.

**oldman3** · 10-26-2014, 07:24 PM

Quote:

Originally Posted by SCOTI

Yes it does. One of the best on the web IMHO.

There's always someone on here to help another truck nut out...Jim

04-05-2014, 10:45 PM	#1
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	How do you align lower Front control arm? 1986, C10 short bed truck. I am getting ready to remove lower front control arm, but concerned how you position it front to back when reinstalling and tightening the u bolts. I do not see any aligning mechanism. Do you mark it current position on the rod before removal. This is my first experience with this type of lower control arm mounting. Thanks for the help. Les Attached Images

04-05-2014, 10:48 PM	#2
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: How do you align lower Front control arm? There is an alignment pin in the front u bolt saddle and a recess in the control arm shaft. No need to mark anything. If you replace the bushings or cross shafts make sure the recess is toward the front of the control arm when you put it back together. __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

04-05-2014, 10:50 PM	#3
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: How do you align lower Front control arm? When you take it apart you'll see an alignment pin on the rear of the crossmember and a spot in the cross shaft to line it up with. Easy peazy. Consider doing the Caster mod before you reassemble it. http://67-72chevytrucks.com/vboard/s...d.php?t=501241 __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

04-05-2014, 10:50 PM	#4
BADAZ chevy guy Registered User Join Date: Mar 2014 Location: Clearfield Utah Posts: 638	Re: How do you align lower Front control arm? All the alignment is in the upper control arm via shims. __________________ My build thread. 1977 C10 short box. >>>> http://67-72chevytrucks.com/vboard/s...d.php?t=624182 700R4 build thread. >>> http://67-72chevytrucks.com/vboard/s...36#post6740236

04-05-2014, 11:38 PM	#5
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: How do you align lower Front control arm? here are a couple pics, should help give you an idea of what keeps the lower A arms aligned. The locating pin is to the front of the truck. Attached Images __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

04-06-2014, 12:37 AM	#6
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: How do you align lower Front control arm? Thanks everybody! Now I can take it all apart tomorrow with confidence that I can get it back together correctly. And/or a summary of available front suspension parts that improve it, during a basic rebuild. Thing like taller ball joints, etc. Thanks, Les Last edited by aotte1; 04-06-2014 at 12:41 AM. Reason: Change wording

04-06-2014, 12:39 AM	#7
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: How do you align lower Front control arm? Bmerdoc, Thanks for reference to the lower control arm mod. Les

10-25-2014, 11:39 PM	#8
SunflowersAndRust Registered User Join Date: Mar 2012 Location: NPR Florida Posts: 4	Re: How do you align lower Front control arm? I am so glad I found this thread.... I have been scratching my head for an hour. This forum rocks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.